MiP-BLE-Protocol

KO | EN

gitlite — search

#react #ai #typescript #llm #go #android #linux #macos #nodejs #java #windows #awesome-list #pytorch #open-source

MiP-BLE-Protocol

(★ 74)

Documents to show the low level MiP command protocol, you can implement your own SDK using your preferred language.

MiP-BLE-Protocol 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

WowWee MiP Bluetooth Low Energy Protocol
===============
[![Gitter](https://badges.gitter.im/Join Chat.svg)](https://gitter.im/WowWeeLabs/MiP-BLE-Protocol?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge)

![](https://raw.githubusercontent.com/WowWeeLabs/MiP-BLE-Protocol/master/Images/MiP.png)

The free MiP BLE protocol lets you send and receive commands to and from your [MiP robot](http://www.meetmip.com). You will need to write your own control code in the language of your choice using an appropriate Bluetooth Low Energy library.

Pre-built official SDKs are available for [iOS](https://github.com/WowWeeLabs/MiP-iOS-SDK) , [Android](https://github.com/WowWeeLabs/MiP-Android-SDK), [PhoneGap](https://github.com/WowWeeLabs/MiP-PhoneGap-SDK), [Windows](https://github.com/WowWeeLabs/MiP-Windows-SDK.git) and [JavaScript (Node.js)](https://github.com/WowWeeLabs/MiP-Node.js-SDK.git).

For information on WowWee products visit: http://www.wowwee.com/.

For your reference, due to a number of issues with some models of phones and BLE we've posted a quick [compatibility guide](http://www.wowwee.com/mip/compatibility) that's worth checking out. It's not a complete list, but just provides a reference of what phones are roughly going to work with Bluetooth Low Energy.

How to use it
-----------------------------------------------

**Finding a MiP before Connecting**

When scanning for MiPs you can use the Broadcast Data to get some basic info about MiP (such as his name) and to determine whether it's a MiP or another WowWee toy.

Here is a typical snapshot of broadcast data returned by scanning for MiPs (on iOS), yours may look slightly different but it should still have similar values:

```
   kCBAdvDataManufacturerData = <00050100 00000000 00000000 00000000 0000>;
   kCBAdvDataServiceUUIDs =     (
    "Unknown (<fff0>)",
    "Unknown (<ffb0>)"
   );
```

- kCBAdvDataManufacturerData = 000501000000000000000000000000000000

To know the difference between MiP and other BLE based products you can check the *Manufacturer Specific Data* which is sent as part of the advertising Packet. Check with your BLE framework on how to get this.

Each WowWee BLE product assigns a special 16bit ID in the first two bytes of the Manufacturer specific data. If you are using one of our prebuilt SDKs this is handled automatically for you.

Taking the first 4 digits gives us a product ID of 5, all MiPs are assigned 5 as a product ID.

- kCBAdvDataServiceUUIDs

Please ignore these values, the only way to find the available services is by connecting to a MiP and scanning for services

**Connecting to a MiP**

Please see your BLE framework for instructions on how to connect to a BLE device. Usually the framework will give you an object and a connect command. Your code should handle mundane tasks such as reconnecting, or handling a failed connection.

**Controlling MiP**

Bluetooth Low Energy is made up of a series of Services & Characteristics. In the case of MiP these are proprietary which means you need to find them by UUID. The following important services are available:

- Receive Data Service: 0xFFE0
  - Receive Data NOTIFY Characteristic: 0xFFE4
- Send Data Service: 0xFFE5
  - Send Data WRITE Characteristic: 0xFFE9
  
Using your Bluetooth Framework of choice you can choose to run a callback every time you receive data using the Receive Data NOTIFY Characteristic.

_**IMPORTANT**_

Please note that you can only find the above services once you're connected to MiP. They will not show up in the broadcast data.

Sending command bytes is very easy, just send a raw byte according to the value in the table.

Receiving commands on the other hand need some special treatment before they can be processed as raw command bytes. All commands come in an ASCII encoded string. For example, in Objective-C you might do the following:

```objective-c
// Get ASCII command value from incoming data
NSString *asciiHex = [[NSString alloc] initWithData:data encoding:NSASCIIStringEncoding];

// Here we simply split the string array for every 2 characters
NSMutableArray *theDataArray = [NSMutableArray array];
for (int i = 0; i < [asciiHex length]; i=i+2) {
  NSString *cmd = [asciiHex substringWithRange:NSMakeRange(i, 2)];
  [theDataArray addObject:@([cmd hexFromString])];
}

NSUInteger cmdByte = [theDataArray[0] unsignedIntegerValue];
[theDataArray removeObjectAtIndex:0];
NSUInteger length = [theDataArray count];

// Using the above code we can get the command
NSLog(@"The command is: %lu", cmdByte);
NSLog(@"Contains %lu extra data bytes: %@", length, theDataArray);
```

Note that this is just an example, you can use any language to processes commands if you follow these steps:

1. Convert the incoming string to ASCII
2. Process the ASCII string and split it off every 2 characters, every two characters is a single incoming hex byte
3. Convert each string set of hex characters into an integer value

Process incoming integer values as you would normally based on the command protocol document.

All of the available control commands are located in [the command document](MiP-Protocol.md)

**Example of Receiving Data from MiP**

Receiving data and interpreting can be a bit confusing, but just take it step by step. Here's an example sending command 0x14 which is getting the firmware version.

1. Send 0x14 to the robot as raw hex (don't do any conversion)
2. Receive 0x31,0x34,0x30,0x45,0x30,0x32,0x31,0x42,0x30,0x37 raw bytes from the robot
3. Convert them to ASCII, for this example I just use [a simple website](http://www.rapidtables.com/convert/number/hex-to-ascii.htm). This gets the result **140E021B07**
4. Here is a string you can now use to interpret the command:

* 14 = Command 0x14 you sent, it's echoed back, just lets you know which data this command is for
* 0E = Year 14 (when converted to decimal)
* 02 = Month 02 (when converted to decimal)
* 1B = Day 27 (when converted to decimal)
* 07 = Number 7 (when converted to decimal) for the revision on this day

Remember that this is a **String** so if you want to treat them as Integers, you will need to convert the hex into an integer. Most languages have this as a built in core function.

**Using MiP via the onboard UART port**

We have created a [separate document with information and code samples](MiP-with-UART.md) for controlling MiP via the onboard serial port.

**Exciting Projects**

We always love to share great projects that are built off of our libraries, so far here are the ones we know about:

* [SparkFun MiP Board Tutorial](https://www.youtube.com/watch?v=QtfJmvjD1gA) - An awesome video showing how to attach the SparkFun MiP Arduino board... also includes a version of MiP with a flamethrower ;)
* [Hacking MiP by Sparkfun](https://learn.sparkfun.com/tutorials/hacking-the-mip---proto-back) - Great blog post with step by step instructions on how to connect via UART
* [SparkFun MiP Arduino SDK](https://github.com/sparkfun/SparkFun_MiP_Arduino_Library) - A work in progress library by sparkfun to control MiP over UART using an Arduino.
* [libmip](https://github.com/arnaud-ramey/libmip) - A C library for controlling MiP, you can see a [demo video with joystick control here](https://www.youtube.com/watch?v=8p5-vwIeQ2g)
* [Cyon-MiP](https://github.com/hybridgroup/cylon-mip) - A NodeJS library for controlling MiP
* [Python Linux MiP](https://github.com/vlimit/mip) - Control MiP via BLE from Python running Linux
* [Easy rechargeable MIP hack](https://hackaday.io/project/3316-putting-lipos-into-your-mip-robot) - Instructions for adding rechargeable batteries to MiP
* [Raspberry Pi MiP](https://github.com/rjelbert/mip_robot/wiki) - Working with MiP using a Raspberry Pi
* [EZ-Builder with MiP](http://www.ez-robot.com/Tutorials/Help.aspx?id=204) - [EZ-Builder](http://www.ez-robot.com) software can officially control MiP
* [MiP with OSX](https://github.com/charcole/MiP-OSX) - Basic example of how to use MiP from OSX
* [MiP C API](https://github.com/adamgreen/MiP-Capi#readme) - Console application development for OS X
* [MiP hacking](https://github.com/adamgreen/MiP) - [adamgreen](https://github.com/adamgreen) has written documented his efforts in developing the above API, it provies for some interesting reading
* [MiP Windows SDK](https://mipwinrtsdk.codeplex.com) - Windows SDK for controlling the MiP robot.

If you've developed your own library or project please send us a pull request!

MiP-BLE-Protocol

MiP-BLE-Protocol 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

MiP-BLE-Protocol

MiP-BLE-Protocol 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README