openscad-screen-case

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

openscad-screen-case

★ 9 Open GitHub ↗

Parametric screen case built with OpenSCAD.

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# OpenSCAD Screen Case

This is a OpenSCAD for screen case and specially the [e-ink Waveshare 7.5" screen](https://www.waveshare.com/product/displays/e-paper/7.5inch-e-paper.htm).

## Features

* Low profile
* Wall mounting system
* Openings to add modules such as buttons
* It is designed to be usable with other displays.

![Photo of front](https://raw.githubusercontent.com/hugokernel/openscad-screen-case/master/images/front.jpg)
![Photo of back](https://raw.githubusercontent.com/hugokernel/openscad-screen-case/master/images/back.jpg)

## Design

The case consists of 2 main parts, a front panel that will support the screen and a case that will contain the electronics.
The 2 parts fit together and are held together by 4 screws in the corners of the case.
The 4 M2 screws are screwed into M2x4x3.5 inserts (see picture).

![Photo of inserts position](https://raw.githubusercontent.com/hugokernel/openscad-screen-case/master/images/front-back.png)

### Gadgets

If you need to add things to the box, you can do so via gadgets that will be inserted into the box.

![Gadgets case](https://raw.githubusercontent.com/hugokernel/openscad-screen-case/master/images/case.png)

You can add a gadget with 2 buttons using 2 micro-switches Omron D2F-01F-T (see image below).

![Photo of switch gadget](https://raw.githubusercontent.com/hugokernel/openscad-screen-case/master/images/gadget-switch.png)

## Requirements

### Prints

You will only need to print 2 pieces and depending if you want buttons choose the associated gadgets.

* [case.stl](stl/case.stl)
* [front.st](stl/front.stl)
* Gadgets:
  * [gadget.stl](stl/gadget.stl) x4 if you do not want button
  * [gadget.stl](stl/gadget.stl) x3 and [gadget-button.stl](stl/gadget-button.stl) + [button.stl](stl/button.stl) x2 if you want one button gadget

### Pieces

* Insert M2X4X3.5 x4
* M2 x 5mm screws x2
* If you want to use button, you need switch (Omron D2F-01F-T)

openscad-screen-case

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README