KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#developer-tools #dsh #dsh-plugin #ai-agent #claude-code #codex #typescript #ai-agents #mcp #cli #rust #deepseek-harness

Topper

★ 44 Open GitHub ↗

Experimental infill software for 3D printing

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

Topper - Infills for your 3D models
===========================

Getting Started
-------------------
Clone the repo, make a build and compile, like so:

mkdir build && cd build
    cmake..
    make

Note: **CGAL** and **OpenSCAD** are required.

After that you can run it like this:

./topper [input_model] [infill_number] [output_model]

Input models **must**  be in **.off** format, while output files can be in any format openscad supports (which are .stl / .off / .csg).

There are currently four infills, numbered below. There are variables in `configuration.scad` which you can change to alter them.

| Number | Infill                            | Picture         |
|:------:| --------------------------------- | --------------- |
| 1      | Sphere Packing                    | ![alt-text][I1] |
| 2      | Truncated Octohedron Tessellation | ![alt-text][I2] |
| 3      | Rhombic Dodecahedron Tessellation | ![alt-text][I3] |
| 4      | Dynamic Struct to Vertex Support  | ![alt-text][I4] |

----------------------------------------------------------------

[I1]:https://dl.dropboxusercontent.com/u/9795990/hosted_images/Github-Topper-Readme/1.png "1"
[I2]:https://dl.dropboxusercontent.com/u/9795990/hosted_images/Github-Topper-Readme/2.png "2"
[I3]:https://dl.dropboxusercontent.com/u/9795990/hosted_images/Github-Topper-Readme/3.png "3"
[I4]:https://dl.dropboxusercontent.com/u/9795990/hosted_images/Github-Topper-Readme/4.png "4"

Topper

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README