LED-Audio-Spectrum

KO | EN

gitlite — search

#hacktoberfest #ai #typescript #machine-learning #linux #docker #macos #nodejs #java #windows #cli #awesome-list #mcp #open-source

LED-Audio-Spectrum

(★ 41)

LED Audio Spectrum and Cycle with adjustments to audio sensitivity and brightness

LED-Audio-Spectrum 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

Please Read these instructions for setting up the LED-Audio_Spectrum Project

----------------------------------------------------------
STEP 1: Download the needed Libraries
----------------------------------------------------------
You will need the following libraries:

FastLED.h

LiquidCrystal.h (optional if using LCD Screen)

You can get these by going to Arduino IDE >> Sketch >> Include Library >> Manage Libraries >> "search for" FastLED and install library

----------------------------------------------------------
STEP 2: Choose the Appropriate File to Upload to Arduino
----------------------------------------------------------
1. Led_audio.ino
- this file simply takes audio input from Sound Detector Module and converts it into colored spectrum on LED Strip

2. Led_audio_cycle.ino
- this file has audio spectrum, manual cycle and auto cycle built into it with main potentiometer(see below)

3. Led_audio_cycle_bright_sens.ino
- this file has audio spectrum, manual cycle and auto cycle built into it with main potentiometer(see below) plus allows you to adjust brightness and sensitivity of audio sensor with another two potentiometers

4. Led_audio_cycle_bright_sens_display.ino
- this is the same as #3 but the brightness and sensitivity is displayed on a 16x2 LED Display (requires the LiquidCrystal.h library)

----------------------------
Main Potentiometer (0-10VDC)
----------------------------
0-1VDC: Audio Spectrum Setting

1-9VDC: Manual Color Cycle Setting (Stays on Color you choose)

9-10VDC: Auto Color Cycle (will slowly cycle through the color spectrum)

----------------------------------------------------------
STEP 3: Wire the Project based on the Arduino Code Used
----------------------------------------------------------

Use the corresponding Schematics files to wire up the components in the project based on the Arduino Sketch you are using:

1. Led_audio.ino = Schematic 1

2. Led_audio_cycle.ino = Schematic 2

3. Led_audio_cycle_bright_sens.ino = Schematic 3

4. Led_audio_cycle_bright_sens_display.ino = Schematic 4

----------------------------------------------------------
STEP 4: ENJOY
----------------------------------------------------------

LED-Audio-Spectrum

LED-Audio-Spectrum 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

LED-Audio-Spectrum

LED-Audio-Spectrum 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README