ft8mon

KO | EN

gitlite — search

#python #react #llm #go #android #linux #docker #nodejs #windows #awesome #kubernetes #vue #openai #ios

(★ 34)

FT8 receiver in C++

ft8mon 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# ft8mon
Demodulate the FT8 WSJT-X protocol of Taylor and Franke.
Input from a sound card via portaudio.
Written in C++, using FFTW.
Runs on Linux, MacOS, and FreeBSD.

To compile:

```
  make
```

To get a list of sound card numbers:

```
  ./ft8mon -list
```

To listen to sound card X, left channel:

```
  ./ft8mon -card X 0
```

You should see output like this:

```
094445  -6 -0.7 1083 JA2KGH CM5VVC EL92
094445 -15  0.1 2584 FG5GH   N4EFS R-07
094445 -10  0.3  601 WA4PT  VK5MRD RRR 
094445 -19  0.0  820 CQ   DX WD6DBM CM97
094445 -15 -0.0 2398 CQ VK3HGQ QF33
094445 -15 -0.4 1227 AB1HL  NA7K   -10
```

The columns are HHMMSS, SNR, time offset, audio frequency, and the message.

To read input from a recorded WAV file:

```
  ./ft8mon -file xxx.wav
```

For Airspy HF+ Discovery support, install the airspyhf
and liquid dsp libraries, and uncomment the relevant lines in the
Makefile. For RFspace SDR-IP, NetSDR, CloudIQ, and CloudSDR
support, install liquid dsp and edit the Makefile. Similarly
for the Apache ANAN-7000dle. Then try commands like these:

```
  ./ft8mon -card airspy ,14.074
  ./ft8mon -card hpsdr 192.168.3.100,14.074
  ./ft8mon -card sdrip 192.168.3.100,14.074
```

Robert Morris,
AB1HL

ft8mon

ft8mon 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

ft8mon

ft8mon 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README