soundploy

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 23)

SoundPloy - enabled Bose SoundTouch to stream custom radio stations

soundploy 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# SoundPloy V2

This guide is about reenabling Bose SoundTouch devices to play radio streams.
The target audience are users who don't want to tinker with their own servers
(e.g. like [soundcork](https://github.com/deborahgu/soundcork) or others).

## Configure device

[Telnet to the device using port 17000](https://www.youtube.com/watch?v=yfa0RaGVpyY) and run the following commands:
```
envswitch boseurls set ";curl soundploy.gmuth.de/v2_install|sh" ;
sys reboot
```
After two reboots (about 2-3 minutes) you should try your existing presets,
however it's likely that you have to create new ones.

## Lookup stream url

Check out the website of your favorite radio station and look for the stream url.
Or use a station directory which lists the stream url.
- [streamurl.link](https://streamurl.link)
- [radio-browser.info](https://www.radio-browser.info)

## Start custom radio stream

We'll use the [orion station API](https://github.com/gmuth/soundploy/blob/main/v2/orion/station.php) for this and send a POST request to the device using [Postman](https://getpostman.com).

![SoundPloy Postman](https://raw.githubusercontent.com/gmuth/soundploy/main/soundploy-postman.png)

1. Start Postman (desktop application) and open [workspace Bose SoundTouch](https://soundploy-1806940.postman.co/workspace/70cec626-e5cf-4cd5-884e-80bd4a7ca40c)
2. Navigate to [collection SoundPloy](https://www.postman.com/soundploy-1806940/bose-soundtouch/collection/5y09857/soundploy) and request _Play custom radio stream_
3. Select an existing environment or create a new one 
4. Set variable `soundtouch` to the IP address of your device
5. Navigate to _Scripts > Pre-request_
6. Change the values of `name` and `streamUrl`
7. Click _Send_

Now your device should start playing the stream.

## Save radio stream to preset button

Press and hold the desired preset button on your device or remote until you hear a beep.
From now on you can start the stream by pressing the preset button.

## Alternative to Postman

Instead of Postman you could also use Chrome and phfu's Preset Manager:
https://phfu.codeberg.page/soundtouch-preset-manager

### Known issues

Devices with firmware below version 27.x are not fully supported by SoundPloy.
You can check your firmware by navigating to `http://your-soundtouch-ip:8090/info`.
The 27.x firmware update should be available from Bose or other sources.

soundploy

soundploy 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

soundploy

soundploy 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README