Rx433Shield

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

★ 12 Open GitHub ↗

Freetronics 433MHz Receiver Shield for Arduino

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

Freetronics 433MHz Receiver Shield
==================================
Copyright 2010 Freetronics Pty Ltd  
Freetronics site:  <www.freetronics.com>  
Freetronics email: <info@freetronics.com>

A general-purpose 433MHz receiver shield for the Arduino Duemilanove
microcontroller and other boards based on the same header format, such
as the Seeeduino and the Arduino Pro.

Includes significant prototyping area using the spare shield area.

Note that this design uses 0603 surface-mount parts and is intended for
machine assembly, but could still be assembled by hand with a fine-tip
soldering iron, a steady hand, and some magnification.

Features:

* Reset button wired through to Arduino reset pin.
 * Two general-purpose surface-mount LEDs wired to GND via current-
   limiting resistors (drive HIGH to illuminate).
 * Pads for 2 surface-mount 100nF smoothing capacitors.
 * Parts overlay on both the top and the bottom so you can see what you
   are connecting without turning the board over.

More information is available on our product page at:

http://www.freetronics.com/products/433mhz-receiver-shield

The "docs" folder within this repository includes a handy copy of the
schematic in PDF format and image(s) of the pcb.

INSTALLATION
------------
The design is saved as an EAGLE project. EAGLE PCB design software is
available from www.cadsoftusa.com free for non-commercial use. To use
this project download it and place the directory containing these files
into the "eagle" directory on your computer. Then open EAGLE and
navigate to Projects -> eagle -> Rx433Shield.

DISTRIBUTION
------------
The specific terms of distribution of this project are governed by the
license referenced below.

LICENSE
-------
Licensed under the TAPR Open Hardware License (www.tapr.org/OHL).
The "license" folder within this repository also contains a copy of
this license in plain text format.

Rx433Shield

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README