osmo-nitb-scripts-calypsobts

KO | EN

gitlite — search

#python #go #machine-learning #rust #docker #macos #java #windows #vue #security #pytorch #ios #mcp #openai

osmo-nitb-scripts-calypsobts

(★ 16)

Tools for easy deployment of osmocom stack and pentesting gsm networks with CalypsoBTS

osmo-nitb-scripts-calypsobts 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

## [Osmo-nitb-scripts](https://github.com/godfuzz3r/osmo-nitb-scripts) for [CalypsoBTS](https://osmocom.org/projects/baseband/wiki/CalypsoBTS)
### [Motorola phones](https://osmocom.org/projects/baseband/wiki/Phones) / OsmocomBB / TI Calypso

Software was tested on [x2 Motorola c123 + DragonOS](https://cemaxecuter.com/) (SMS + USSD)

## Installation

### Cloning
```
git clone https://github.com/jhonnybonny/osmo-nitb-scripts-calypsobts.git
```
### Install services (P.S. Clock setting (ARFCN) inside services/osmo-trx-lms.service 🤪)
```
sudo ./install_services.sh
```
Auto start ✅
```
sudo ./auto.sh
```
Start ( Also u need run TRX ⚠️ )
```
sudo python3 main.py
```

## Configure
### All osmocom config files stored in `config/` folder and updating everytime when you start `main.py`. You need change it by youself ⚠️ .
#### config.json
For easy setup of user-interactivity you can use config.json
- config.json example
```
{
   "scripts":{
      "sms":{
         "enabled": true,
         "sender_extension": "CrTh",
         "message":[
            "TEST SMS"
         ]
      },
      "ussd":{
         "enabled": true,
         "ussd_type": 1,
         "message":[
            "CrTh.",
            "TEST ALERT TEST ALERT TEST ALERT"
         ]
      },
      "call":{
         "enabled": false,
         "caller_extension": 666,
         "voice-file": "tt-monkeys"
      }
   }
}
```
#### sms
Send sms to new users. When user connect to network, script choose 1 random message from ```message``` section and sending it from extension ```sender_extension```

#### ussd
Send ussd to new users. Script choose 1 random message from ```message``` section adn sending it to user

#### call ( non tested ⚠️ )
Make a call to new user. This function works only with Asterisk support. voice-file is 16-bit 8 kHz wav file. If ```caller_extension``` is ```false```, then the user sees that the phone is not defined.

osmo-nitb-scripts-calypsobts

osmo-nitb-scripts-calypsobts 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

osmo-nitb-scripts-calypsobts

osmo-nitb-scripts-calypsobts 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README