diy_bench_power_supply_lm2596

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

diy_bench_power_supply_lm2596

★ 8 Open GitHub ↗

A DIY two channel bench power supply based on Texas Instruments LM2596

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# DIY Bench Power Supply LM2596
There is a ton of material on the internet about DIY bench power supplies based on TI LM2576 [1], TI LM2587 [2] and TI LM2596 [3] buck/boost converters.

I used [4], [5] and [6] as a starting point for my own design.

# Repository structure
```
/software/      Bare-metal firmware implementation with OOP approach (PlatformIO project)
/hardware/      Circuit schematics and simulations as documentation
/mechanics/     Housing design files
/misc/          Material of built version
```

# Features
* Two channels with on/off LED and button per channel
* Adjustable voltage (CV)
* Settable and adjustable current limit (CC)
* LED indicators for enabled current limit and reached limit
* LCD showing measured voltages, currents and current limits per channel
* Buzzer feedback (acoustic button feedback, current limit warning)

# Design / Components
* Arduino Pro Mini as controller (mainly because of the 8 analog pins)
* LM2596 buck converter boards [7]
* HP notebook 90W power supply brick (19V, max. 4.74A)

## Simulation
Texas Instruments does provide SPICE models for the LM2596 3.3, 5 and 12 volt version. But not for the ADJ version. Simple LTspice simulations with a modified SPICE model are located here: `/hardware/ltspice/`.

Modified lines to edit out the internal voltage divider (see file `LM2596_5P0_TRANS.LIB`).

Original lines:
```
...
E_U1_E5         U1_N16912605 0 VALUE { V(FB_INT, GND) }
...
R_RFB2         FB FB_INT  7.63k TC=0,0
R_RFB1         GND FB_INT  2.5k TC=0,0
...
```

New lines:
```
...
E_U1_E5         U1_N16912605 0 VALUE { V(FB, GND) }
...
*R_RFB2         FB FB_INT  7.63k TC=0,0
*R_RFB1         GND FB_INT  2.5k TC=0,0
...
```

Added simulations are:

* `lm2596-modified-3_3v-load-3_3-ohm-transient-10ms.asc` with [results](/hardware/ltspice/lm2596-modified-3_3v-load-3_3-ohm-transient-10ms.png)
* `lm2596-modified-3_3v-load-33-ohm-transient-10ms.asc` with [results](/hardware/ltspice/lm2596-modified-3_3v-load-33-ohm-transient-10ms.png)
* `lm2596-modified-5v-load-5-ohm-transient-10ms.asc` with [results](/hardware/ltspice/lm2596-modified-5v-load-5-ohm-transient-10ms.png)
* `lm2596-modified-5v-load-50-ohm-transient-10ms.asc` with [results](/hardware/ltspice/lm2596-modified-5v-load-50-ohm-transient-10ms.png)
* `lm2596-modified-17v-load-17-ohm-transient-10ms.asc` with [results](/hardware/ltspice/lm2596-modified-17v-load-17-ohm-transient-10ms.png)
* `lm2596-modified-17v-load-50-ohm-transient-10ms.asc` with [results](/hardware/ltspice/lm2596-modified-17v-load-50-ohm-transient-10ms.png)

Special simulation with added current limiter (not sure about results):

* `lm2596-modified-5v-load-5-ohm-transient-10ms-with-current-limiter.asc` with [results](/hardware/ltspice/lm2596-modified-5v-load-5-ohm-transient-10ms-with-current-limiter.png)

## Schematic
The [schematic](https://easyeda.com/matthiasdittmer/diy_power_supply_lm2596) can be found at [EasyEDA](https://easyeda.com/). I did no PCB (perfboard design is enough).

## Performance of LM2596
For a detailed performance review of the LM2596 see [8].

# References
* [1] Website TI LM2576: https://www.ti.com/product/LM2576
* [2] Website TI LM2587: https://www.ti.com/product/LM2587
* [3] Website TI LM2596: https://www.ti.com/product/LM2596
* [4] GreatScottLab LM2587 modification project: https://www.instructables.com/id/Adding-a-Current-Limit-Feature-to-a-BuckBoost-Conv/
* [5] Youtube Video LM2576 design: https://www.youtube.com/watch?v=EVL7TzCde8I
* [6] Website article LM2576 design: https://www.smbaker.com/lm2576-constant-voltage-constant-current-switching-power-supply
* [7] Converter from ebay Germany: https://www.ebay.de/itm/3x-LM2596-DC-Step-Down-Spannungswandler-Arduino-Modul-Regler-LM2596S/252785167788
* [8] Performance test and review of 20W DC-DC Step Down Voltage Regulator: https://lygte-info.dk/review/Power%20Adjustable%20buck%20converter%20LM2596%20UK.html

diy_bench_power_supply_lm2596

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

diy_bench_power_supply_lm2596

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README