KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#dsh #dsh-plugin #ai-agent #developer-tools #codex #typescript #cli #deepseek-harness #claude-code #ai-agents #mcp #rust

SSD1351-Driver-Library

★ 31 Open GitHub ↗

C driver library for the SSD1351 OLED display and display emulator

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# SSD1351 Driver Library
Driver library for the SSD1351 128x128 RGB OLED Display intended for generic use with C in any microcontroller/device.
Includes an emulator to run and test programs that use this library on Windows.

*Remember to configure the ssd1351.h file GPIO, SPI definitions according to your own hardware*

[Check the blog entry](https://gecko05.github.io/2019/06/23/rgb-library.html)

Features:
* Drawing sprites
* Importing sprites from a .bmp file made in Aseprite
* Formatted string printing
* Drawing single pixels
* Drawing lines
* Drawing rectangles and filled rectangles
* Drawing circles and filled circles
* Display configuration
* RGB color encoding
* Screen emulator for Windows

To Do:
* Extend Display configurations such as color depth, frequency, etc.

# Converting sprites
Load a bitmap image created with Aseprite to the same folder where ConvertSprites.py is located, then call:
```
python3 ConvertSprites.py "<sprite-name0>.bmp"[, "<sprite-name1>.bmp", ...]
```
Loaded_sprites.c, Loaded_sprites.h and color_palette.c files will be generated with the converted sprites.

Note that the color palette used in Aseprite will be translated to the equivalent colors under the library's color mode and this will be performed just once, so make sure to use the same palette across all the sprites.

# Examples

Check the releases to find a sample project that uses this library for the following boards:
* [ST Nucleo L152RE](https://github.com/Gecko05/SSD1351-Driver-Library/releases)

# Running the emulator

An emulator written in Go is located under SSD1351_Emulator. To use it run the following command inside SSD1351_Emulator:
```
go run .
```
It will open a socket on port 9988 and listen for incoming screen data. To see it in action, simply compile and run the program under example_with_emulator_WIN.
Note that this example program runs only on Windows.

See the releases section if you're only interested in the binaries for both the demo program and the emulator.
[Emulator and example binaries](https://github.com/Gecko05/SSD1351-Driver-Library/releases/tag/v1.1.0)

# Demo

Sample code includes three demos; printing, lines, circles and a sprite

```
#include "ssd1351.h" // Remember to configure this file to your own hardware
#include "math.h"
#include "stdlib.h"

#define DEMO_RECTANGLES

int main(){
  SSD1351_init();
  SSD1351_fill(COLOR_BLACK);
  SSD1351_update();
  int r = 50;
  int g = 100;
  int b = 240;
  int gd = 1;
#ifdef DEMO_CIRCLES
  int c0, c1, c2, c3, c4;
  c0 = 5;
  c1 = 25;
  c2 = 45;
  c3 = 65;
  c4 = 85;
#endif // DEMO_CIRCLES
  while(1){
#ifdef DEMO_PRINT
    //          D E M O    P R I N T
    SSD1351_set_cursor(0, 0);
    SSD1351_printf(SSD1351_get_rgb(r, g, b), med_font, "Hello worldI spent \n%i %s\n", 17, "dollars");
    SSD1351_printf(COLOR_RED, small_font, "\nfor this");
    SSD1351_printf(SSD1351_get_rgb(245, 255, 20), big_font, "\nSSD1351");
    if (gd){
      g+=3;
      b-=3;
    }
    else{
      g-=3;
      b+=3;
    }
    if( b <= 100){
      gd = !gd;
    }
    else if (g <= 100){
      gd = !gd;
    }
#endif // DEMO_PRINT
#ifdef DEMO_RECTANGLES
    //          D E M O    R E C T A N G L E S
    for (int i = 128; i > 0;i-=12){
      SSD1351_draw_filled_rect( 64 - i/2, 64 - i/2, i, i, 0x1111 + rand());
    }
#endif // DEMO_RECTANGLES
#ifdef DEMO_CIRCLES
    //          D E M O    C I R C L E S
    c0+=5;
    c1+=5;
    c2+=5;
    c3+=5;
    c4+=5;
    if (c0 > 90){
      c0 = 5;
    }
    if (c1 > 90){
      c1 = 5;
    }
    if (c2 > 90){
      c2 = 5;
    }
    if (c3 > 90){
      c3 = 5;
    }
    if (c4 > 90){
      c4 = 5;
    }
    int arr[5] = {c0, c1, c2, c3, c4};
    int blu[5] = {150, 190, 250, 190, 150};
    int green[5] = {50, 80, 130, 80, 50};
    int maxi, max = 0;
    for (int k = 0; k < 5; k++){
      max = 0;
      for (int j = 0; j < 5; j++){
        if (arr[j] > max){
          max = arr[j];
          maxi = j;
        }
      }
      SSD1351_draw_filled_circle(64, 64, arr[maxi], SSD1351_get_rgb(20, green[maxi], blu[maxi]));
      arr[maxi] = 0;
    }
#endif // DEMO_CIRCLES
  //          D E M O    S P R I T E S
#ifdef DEMO_SPRITES
SSD1351_draw_sprite(0, 0, &sprite0);
#endif // DEMO_SPRITES
    SSD1351_update();
    HAL_Delay(33);
  }
}
```

SSD1351-Driver-Library

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README