FFTResampling.jl

KO | EN

gitlite — search

#python #hacktoberfest #react #typescript #llm #golang #android #docker #java #awesome #awesome-list #pytorch #mcp #openai

FFTResampling.jl

(★ 13)

A package for FFT based interpolations of N-dimensional arrays.

FFTResampling.jl 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# This package has been deprecated in favor of the more general [FourierTools.jl](https://github.com/bionanoimaging/FourierTools.jl)

## FFTResampling.jl

This package provides a simple sinc interpolation routine (up and downsampling) written in Julia.
It works with real and complex N-dimensional arrays.

**As this package is at an early stage of development, we would be excited to welcome any new contributers!**

## Installation
`FFTResampling.jl` is has been tested version Julia from 1.3 to 1.6. It won't be maintained further.
It can be installed with the following command

```julia
julia> ] add FFTResampling
```
However, please prefer [FourierTools.jl](https://github.com/bionanoimaging/FourierTools.jl) which is maintained and is also more performant.

## Functionality
The FFTW based methods require periodic, bandwidth limited (and properly Nyquist sampled) signals.
Currently the algorithms work only with equidistant spaced signals. We offer one main method: `resample`
It offers upsampling of a signal by zero padding the spectrum in Fourier space.
Secondly, a signal can be downsampled by cropping frequencies around the center spot in Fourier space. We therefore reduce resolution without aliasing.

This package also works partially with CUDA arrays. You need to set the keyword argument `boundary_handling=false` in `resample` to prevent a scalar indexing allowing a fast execution.

## Example

### Sinc interpolation
Below you can find a simple example for up sampling using `resample` and `sinc_interpolate_sum`.
`sinc_interpolate_sum` is a slow sum based method.
Furthermore, there is an image interpolation [Pluto.jl](https://github.com/fonsp/Pluto.jl) notebook in the [examples folder](examples/).
We can see that the interpolated signal matches the higher sampled signal well.
```julia
 begin
	N_low = 128
	x_min = 0.0
	x_max = 16π
	
	xs_low = range(x_min, x_max, length=N_low+1)[1:N_low]
	xs_high = range(x_min, x_max, length=5000)[1:end-1]
	f(x) = sin(0.5*x) + cos(x) + cos(2 * x) + sin(0.25*x)
	arr_low = f.(xs_low)
	arr_high = f.(xs_high)
end

begin
	N = 1000
	xs_interp = range(x_min, x_max, length=N+1)[1:N]
	arr_interp = resample(arr_low, N)

N2 = 1000
	xs_interp_s = range(x_min, x_max, length=N2+1)[1:N2]
	arr_interp_s = FFTResampling.sinc_interpolate_sum(arr_low, N2)
end

begin
	scatter(xs_low, arr_low, legend=:bottomleft, markersize=2, label="Low sampling")
	plot!(xs_interp, arr_interp, label="FFT based sinc interpolation", linestyle=:dash)
	plot!(xs_interp_s, arr_interp_s, label="sum based sinc interpolation", linestyle=:dot)
	plot!(xs_high, arr_high, linestyle=:dashdotdot, label="High sampling")
end
```

![](https://raw.githubusercontent.com/roflmaostc/FFTResampling.jl/main/examples/plot.png)

### Downsampling
32 samples in the downsampled signal should be sufficient for Nyquist sampling.
And as we can see, the downsampled signal still matches the original one.

```julia
begin
	N_ds = 32
	xs_ds = range(x_min, x_max, length=N_ds+1)[1:N_ds]
	arr_ds = resample(arr_high, N_ds)
end

begin
	scatter(xs_low, arr_low, legend=:bottomleft, markersize=2, label="Low sampling")
	plot!(xs_interp, arr_interp, label="FFT based sinc interpolation", linestyle=:dash)
	plot!(xs_ds, arr_ds, label="resampled array", linestyle=:dot)	
end
```

![](https://raw.githubusercontent.com/roflmaostc/FFTResampling.jl/main/examples/plot_ds.png)

# Image Upsampling
Having a Nyquist sampled image, it is possible to perform a sinc interpolation and creating visually much nicer images.
However, the information content does not change between both images.
The full Pluto notebook is [here](examples/image_interpolation.jl).
The right image is the upsampled version of the left one.

![](https://raw.githubusercontent.com/roflmaostc/FFTResampling.jl/main/examples/image_low_res.png)
![](https://raw.githubusercontent.com/roflmaostc/FFTResampling.jl/main/examples/image_high_res.png)

[docs-dev-img]: https://img.shields.io/badge/docs-dev-pink.svg 
[docs-dev-url]: https://roflmaostc.github.io/FFTResampling.jl/dev/

[docs-stable-img]: https://img.shields.io/badge/docs-stable-darkgreen.svg 
[docs-stable-url]: https://roflmaostc.github.io/FFTResampling.jl/stable/

[CI-img]: https://github.com/roflmaostc/FFTResampling.jl/workflows/CI/badge.svg
[CI-url]: https://github.com/roflmaostc/FFTResampling.jl/actions?query=workflow%3ACI

[codecov-img]: https://codecov.io/gh/roflmaostc/FFTResampling.jl/branch/main/graph/badge.svg
[codecov-url]: https://codecov.io/gh/roflmaostc/FFTResampling.jl

# Acknowledgements
There is also a discussion on [Discourse](https://discourse.julialang.org/t/sinc-interpolation-based-on-fft/52512) about some of the issues that were encountered during creation of that package.

FFTResampling.jl

FFTResampling.jl 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

FFTResampling.jl

FFTResampling.jl 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README