KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#dsh #dsh-plugin #developer-tools #ai-agent #claude-code #codex #typescript #ai-agents #deepseek-harness #mcp #cli #rust

json-typedef-infer

★ 65 Open GitHub ↗

A CLI tool that generates JSON Typedef schemas from example data

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# jtd-infer: Generate JSON Typedef schemas from examples [![Crates.io](https://img.shields.io/crates/v/jtd_infer)](https://crates.io/crates/jtd_infer) [![Docs.rs](https://docs.rs/jtd-infer/badge.svg)](https://docs.rs/jtd_infer)

[JSON Type Definition](https://jsontypedef.com), aka
[RFC8927](https://tools.ietf.org/html/rfc8927), is an easy-to-learn,
standardized way to define a schema for JSON data. You can use JSON Typedef to
portably validate data across programming languages, create dummy data, generate
code, and more.

`jtd-infer` is a tool that generates ("infers") a JSON Typedef schema from
example data.

```bash
echo '{ "name": "Joe", "age": 42 }' | jtd-infer | jq
```

```json
{
  "properties": {
    "age": {
      "type": "uint8"
    },
    "name": {
      "type": "string"
    }
  }
}
```

## Installation

On macOS, you can install `jtd-infer` via Homebrew:

```bash
brew install jsontypedef/jsontypedef/jtd-infer
```

For all other platforms, you can download and extract the binary yourself from
[the latest release][latest]. You can also install using `cargo` by running:

```bash
cargo install jtd_infer
```

## Usage

For high-level guidance on how to use `jtd-infer`, see ["Inferring a JSON
Typedef Schema from Real Data"][jtd-jtd-infer] in the JSON Typedef website docs.

### Basic Usage

To invoke `jtd-infer`, you can either:

1. Have it read from STDIN. This is the default behavior.
2. Have it read from a file. To do this, pass a file name as the last argument
   to `jtd-infer`.

`jtd-infer` reads a _sequence_ of JSON messages. So for example, if you have a
file like this in `data.json`:

```json
{ "name": "john doe", "age": 42 }
{ "name": "jane doe", "age": 45 }
```

You can give it to `jtd-infer` in two ways:

```bash
# Both of these do the same thing.
cat data.json | jtd-infer
jtd-infer data.json
```

In both cases, you'd get this output:

```json
{"properties":{"name":{"type":"string"},"age":{"type":"uint8"}}}
```

### Changing the default number type

> ⚠️ This section is often important if you are retrofitting JSON Typedef to a
> JavaScript-based application.

By default, JSON Typedef will infer the most specific possible type for inputs.
So, for example, it will guess `uint8` if it sees a `12` in your input:

```bash
echo "12" | jtd-infer
```

```json
{"type":"uint8"}
```

However, if you're giving JSON Typedef a small sample set, or if you in practice
have data that is far smaller than the actual numerical datatypes your
application supports, then this behavior may be undesirable. For example, it's
common for JavaScript-based applications to actually support `float64` for all
numeric inputs, because JavaScript numbers are IEEE double-precision floats.

To tell JSON Typedef to prefer a different type than the one it would normally
guess, you can use `--default-number-type` to change its behavior. For example:

```bash
# JavaScript numbers are all float64s, and so it's pretty common for JavaScript
# applications to not check if inputs are integers or within a particular range.
#
# If you don't want to make your JSON Typedef schema strict about decimal,
# negative, or out of int range numbers, you can pass float64 as the default
# number type.
echo "12" | jtd-infer --default-number-type=float64
```

```json
{"type":"float64"}
```

Another use-case is if you're writing an application that uses signed 32-bit
ints everywhere, and your example data simply never in practice has examples of
negative numbers or numbers too big for 8- or 16-bit numbers. You can achieve
that by using `int32` as your default number type:

```bash
echo "12" | jtd-infer --default-number-type=int32
```

```json
{"type":"int32"}
```

Note that `jtd-infer` will ignore your default if it doesn't match with the
data. For example, `int32` only works with whole numbers, so if a decimal number
or a number too big for 32-bit signed integers comes in, it will fall back to
`float64`:

```bash
# both of these output {"type":"float64"}
echo "3.14" | jtd-infer --default-number-type=int32
echo "9999999999" | jtd-infer --default-number-type=int32
```

### Advanced Usage: Providing Hints

By default, `jtd-infer` will never output `enum`, `values`, or `discriminator`
schemas. This is by design: by always being consistent with what it outputs,
`jtd-infer` is more predictable and reliable.

If you want `jtd-infer` to output an `enum`, `values`, or `discriminator`, you
can use the `--enum-hint`, `--values-hint`, and `--discriminator-hint` flags.
You can pass each of these flags multiple times.

All of the hint flags accept [JSON
Pointers](https://tools.ietf.org/html/rfc6901) as values. If you're used to the
JavaScript-y syntax of referring to things as `$.foo.bar`, the equivalent JSON
Pointer is `/foo/bar`. `jtd-infer` treats `-` as a "wildcard". `/foo/-/bar` is
equivalent to the JavaScript-y `$.foo.*.bar`.

As a corner-case, if you want to point to the *root* / top-level of your input,
then use the empty string as the path. See ["Using
`--values-hint`"](##using---values-hint) for an example of this.

#### Using `--enum-hint`

By default, strings are always inferred to be `{ "type": "string" }`:

```bash
echo '["foo", "bar", "baz"]' | jtd-infer
```

```json
{"elements":{"type":"string"}}
```

But you can instead have `jtd-infer` output an enum by providing a path to the
string you consider to be an enum. In this case, it's any element of the root of
the array -- the JSON Pointer for that is `/-`:

```bash
echo '["foo", "bar", "baz"]' | jtd-infer --enum-hint=/-
```

```json
{"elements":{"enum":["bar","baz","foo"]}}
```

#### Using `--values-hint`

By default, objects are always assumed to be "structs", and `jtd-infer` will
generate `properties` / `optionalProperties`. For example:

```bash
echo '{"x": [1, 2, 3], "y": [4, 5, 6], "z": [7, 8, 9]}' | jtd-infer
```

```json
{"properties":{"y":{"elements":{"type":"uint8"}},"z":{"elements":{"type":"uint8"}},"x":{"elements":{"type":"uint8"}}}}
```

If your data is more like a map / dictionary, pass a `values-hint` that points
to the object that you want a `values` schema from. In this case, that's the
root-level object, which in JSON Pointer is just an empty string:

```bash
echo '{"x": [1, 2, 3], "y": [4, 5, 6], "z": [7, 8, 9]}' | jtd-infer --values-hint=
```

```json
{"values":{"elements":{"type":"uint8"}}}
```

#### Using `--discriminator-hint`

By default, objects are always assumed to be "structs", and `jtd-infer` will
generate `properties` / `optionalProperties`. For example:

```bash
echo '[{"type": "s", "value": "foo"},{"type": "n", "value": 3.14}]' | jtd-infer
```

```json
{"elements":{"properties":{"value":{},"type":{"type":"string"}}}}
```

If your data has a special "type" property that tells you what's in the rest of
the object, then use `--discriminator-hint` to point to that property.
`jtd-infer` will output an appropriate `discriminator` schema instead:

```bash
echo '[{"type": "s", "value": "foo"},{"type": "n", "value": 3.14}]' | jtd-infer --discriminator-hint=/-/type | jq
```

```json
{
  "elements": {
    "discriminator": "type",
    "mapping": {
      "s": {
        "properties": {
          "value": {
            "type": "string"
          }
        }
      },
      "n": {
        "properties": {
          "value": {
            "type": "float64"
          }
        }
      }
    }
  }
}
```

[jtd-jtd-infer]: https://jsontypedef.com/docs/tools/jtd-infer
[latest]: https://github.com/jsontypedef/json-typedef-infer/releases/latest

json-typedef-infer

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README