ansible-octoprint

KO | EN

gitlite — search

#hacktoberfest #react #typescript #llm #android #rust #linux #macos #vue #pytorch #security #openai #mcp #open-source

ansible-octoprint

(★ 8)

Ansible Role to setup octoprint on a Raspberry Pi

ansible-octoprint 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Ansible OctoPrint Role
This is a role to setup OctoPrint on a Debian based system. Currently it is tested on Raspbian based systems.
Besides octoprint this role can also take of installing necessary tools to compile firmware for Arduino based controller boards and flash them via USB.

## Requirements
* A Debian based system (Raspbian is tested)
* Ansible 1.7

## Role variables
This role can be configured in many ways. Basically all options in the octoprint config can be set via variables

### Defaults

Name | Default | Description
-----|---------|------------
octoprint_version | 1.1.2 | What octoprint version to checkout. This should be a branch or tag name.
octoprint_user | octoprint | The system user under which octoprint runs.
octoprint_group | octoprint | The system group used for octoprint.
octoprint_installDir | /opt/octoprint | Where to checkout the octoprint sources.
octoprint_repo | https://github.com/foosel/OctoPrint.git | What upstream repo to use. Useful for using forks.
octoprint_udev_symlink | reprap | This role can create a symlink for your serial port so you always find your printer. This is the name for the symlink.
octoprint_config_api | list | This is a list of named properties configuring the api section of the octoprint config. 
octoprint_config_server_host | 0.0.0.0 | Octoprint should bind to these IP addresses
octoprint_config_server_port | 5000 | The port Octoprint should listen on
octoprint_config_server_baseUrl | / | The base url under which Octoprint can be reached
octoprint_config_server_scheme | http | Wether Octoprint should use http or https
octoprint_config_server_firstRun | false | Show the first run wizard
octoprint_marlin_folder | /opt/marlin | To which folder checkout your printers firmware (if enabled)
octoprint_config_printerParameters | Yaml object movementSpeed with childs x,y,z,e | Configuration of your printer

### Optionals

Name | Description
-----|------------
octoprint_udev_attrs | Key value of udev attrs and values to identify your printer and create a symlink
octoprint_config_accessControl | Configures the access control section in your Octoprint config

ansible-octoprint

ansible-octoprint 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

ansible-octoprint

ansible-octoprint 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README