batmon

KO | EN

gitlite — search

#python #hacktoberfest #react #ai #typescript #llm #go #android #docker #java #pytorch #security #ios #openai

(★ 12)

Battery monitor for Hackberry Pi CM5 - GNOME Shell extension

batmon 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Hackberry Battery Monitor

A GNOME Shell extension for monitoring battery state on Hackberry Pi CM5 devices using the MAX17048 fuel gauge IC. Displays battery percentage and voltage in the GNOME top panel.

![Batmon for HackberryPi CM5](https://github.com/sebastienb/batmon/blob/main/screencast.gif?raw=true)

This is built with claude code using the python sample provided by https://github.com/ZitaoTech/HackberryPiCM5

## Version 0.2.2 (2025-06-26)

### What's New
- **Configurable refresh interval** (5-60 seconds) via settings UI
- **Settings UI** accessible through GNOME Extensions app preferences
- **Improved charging detection** with lower threshold (0.2%/hr)
- **Faster default refresh** (15 seconds instead of 30)
- **Fixed install script** to prevent GUI freezing during updates

## Features

- Real-time battery percentage and voltage monitoring
- Charging detection with visual indicators (lightning bolt icon)
- Configurable refresh interval (5-60 seconds) via settings UI
- GNOME Shell integration with panel indicator
- Dynamic battery icon based on charge level
- Dropdown menu showing voltage, status, and charge/discharge rate
- Automatic I2C bus detection (no more hardcoded bus numbers!)
- Support for GNOME Shell versions 42-47

## Requirements

- Hackberry Pi CM5 or compatible device with MAX17048 fuel gauge
- GNOME Shell 42 or later
- Python 3 with smbus2 module
- I2C enabled on your system

## Installation

### 1. Install Dependencies

```bash
sudo apt update
sudo apt install python3-smbus2
```

### 2. Enable I2C

Ensure I2C is enabled on your system. On Raspberry Pi OS:

```bash
sudo raspi-config
# Navigate to Interface Options > I2C > Enable
```

### 3. Install the Extension

Clone the repository and run the installation script:

```bash
git clone https://github.com/sebastienb/batmon.git
cd batmon
./install-or-update.sh
```

### Updating the Extension

To update to the latest version:

```bash
cd batmon
git pull
./install-or-update.sh
```

The script will automatically handle the update process and preserve your settings.

### 4. Enable the Extension

After installation, restart GNOME Shell:
- Press `Alt+F2`
- Type `r` and press Enter

Then enable the extension:

```bash
gnome-extensions enable hackberry-battery@batmon
```

Alternatively, use the GNOME Extensions app to enable it.

## Testing

To test the battery voltage reading independently:

```bash
python3 get_battery_voltage.py
```

This will continuously display the battery voltage. Press `Ctrl+C` to stop.

## Configuration

The extension uses the following default settings:
- I2C Bus: Auto-detected (scans available buses)
- I2C Address: 0x36 (MAX17048 default)
- Update Interval: 15 seconds (configurable 5-60 seconds)

### Settings UI

Access extension preferences by:
1. Opening GNOME Extensions app
2. Finding "Hackberry Battery Monitor"
3. Clicking the settings/gear icon
4. Adjust refresh interval to your preference

### Battery Status Levels
- **Full**: > 80%
- **Good**: 60-80%
- **Medium**: 40-60%
- **Low**: 20-40%
- **Critical**: < 20%

## File Structure

```
batmon/
├── get_battery_voltage.py          # Standalone battery voltage reader
├── install.sh                      # Legacy installation script
├── install-or-update.sh            # Install/Update script (recommended)
├── README.md                       # This file
└── hackberry-battery@batmon/       # GNOME extension files
    ├── extension.js                # Main extension code
    ├── metadata.json               # Extension metadata
    ├── battery-reader.py           # Python script with charging detection
    ├── prefs.js                    # Settings UI
    └── schemas/                    # GSettings schema files
        └── org.gnome.shell.extensions.hackberry-battery.gschema.xml
```

## Uninstallation

To remove the extension:

```bash
gnome-extensions uninstall hackberry-battery@batmon
```

Or manually remove:

```bash
rm -rf ~/.local/share/gnome-shell/extensions/hackberry-battery@batmon
```

## Troubleshooting

### Extension not showing up
- Ensure GNOME Shell was restarted after installation
- Check extension is enabled: `gnome-extensions list`
- View logs: `journalctl -f -o cat /usr/bin/gnome-shell`

### I2C Permission Issues
If you get permission errors, add your user to the i2c group:

```bash
sudo usermod -a -G i2c $USER
```

Then log out and back in.

### Battery Reading Errors
- Verify I2C is enabled: `ls /dev/i2c*`
- Check I2C device is detected: `sudo i2cdetect -y [bus_number]` (try different bus numbers)
- Ensure MAX17048 is at address 0x36
- Check extension logs: `journalctl -xe | grep hackberry-battery`

## License

This project is open source. Please check the repository for license details.

## Contributing

Contributions are welcome! Please submit issues and pull requests on GitHub.

batmon

batmon 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

batmon

batmon 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README