marlin-for-ender-2

KO | EN

gitlite — search

#hacktoberfest #ai #llm #go #android #linux #docker #macos #nodejs #windows #cli #kubernetes #awesome-list #mcp

marlin-for-ender-2

(★ 8)

Marlin firmware for Creality Ender-2

marlin-for-ender-2 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Marlin firmware for Creality Ender-2 [![Build Status](https://travis-ci.com/probonopd/marlin-for-ender-2.svg?branch=master)](https://travis-ci.com/probonopd/marlin-for-ender-2)

This builds [Marlin firmware](https://github.com/MarlinFirmware/Marlin) for Creality Ender-2 on [Travis CI](https://travis-ci.com/probonopd/marlin-for-ender-2). The resulting firmware can be downloaded from [here](https://github.com/probonopd/marlin-for-ender-2/releases).

## Changes

* Stock Marlin boot logo
* `LIN_ADVANCE` enabled
* S-curve acceleration enabled
* Filament change in the menu enabled
* Compiler optimizations for size enabled
* Optional part cooling fan runs at reduced speed to improve layer adhesion (I am using a [Petsfang](https://www.thingiverse.com/thing:2759439))

I use this with CreawsomeMod settings for Cura, but __130 mm/s__ printing speed (more may be possible).

Let me know if you would like to see additional changes.

## Flashing with USBASP

* Connect USBASP to 6-pin header, DO NOT connect VCC from the USBASP to the printer. Have the printer powered by its PSU
* Backup the original firmware with `sudo avrdude -p atmega1284p -c usbasp -F -U flash:r:factory.hex:i`.
* Flash this firmware with `sudo avrdude -p m1284p -c usbasp -F -U flash:w:'/home/me/Downloads/Marlin.ino.hex':i`. A bootloader is not needed!

marlin-for-ender-2

marlin-for-ender-2 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

marlin-for-ender-2

marlin-for-ender-2 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README