ALP

KO | EN

gitlite — search

#python #hacktoberfest #golang #deep-learning #linux #docker #java #nodejs #awesome #cli #awesome-list #openai #ios #open-source

(★ 33)

Home of ALP/GraphBLAS and ALP/Pregel, featuring shared- and distributed-memory auto-parallelisation of linear algebraic and vertex-centric programs. Soon with more to come!

ALP 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

<pre>
   _____  .____   __________
  /  _  \ |    |  \______   \
 /  /_\  \|    |   |     ___/
/    |    \    |___|    |
\____|__  /_______ \____|
        \/        \/

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
</pre>

This distribution contains the C++ Algebraic Programming (ALP) framework, and
provides the ALP/GraphBLAS, ALP/Pregel, and Sparse BLAS programming interfaces.
Only a subset of Sparse BLAS functionality is supported, at present.

This distribution contains ALP backends that generate:
 - sequential programs,
 - shared-memory auto-parallelised programs,
 - nonblocking shared-memory auto-parallelised programs, and
 - sequential programs that generate HyperDAG representations of the executed
   ALP program.

Additional backends may optionally be enabled by providing their dependences.
Those backends generate:
 - distributed-memory auto-parallelised programs,
 - hybrid shared- and distributed-memory auto-parallelised programs, and
 - sequential programs for the Banshee RISC-V Snitch Core simulator
   (experimental).

All backends perform automatically generate vectorised programs, amongst other
automatically-applied optimisations.

The ALP/GraphBLAS and ALP/Pregel interfaces are enabled for all backends, while
the standard Sparse BLAS APIs only allow for the efficient support of the
sequential and shared-memory parallel backends.

# Minimal requirements

We first summarise the compile-time, link-time, and run-time dependences of ALP.
The following are required for producing both sequential and shared-memory ALP
libraries and programs, using its `reference` and `reference_omp` backends.

## Compilation

To compile ALP, you need the following tools:

1. A C++11-capable compiler such as GCC 4.8.2 or higher, with OpenMP support
2. LibNUMA development headers
3. POSIX threads development headers
4. [CMake](https://cmake.org/download/) version 3.13 or higher, with GNU Make
(CMake's default build tool on UNIX systems) or any other supported build tool.

## Linking and run-time
The ALP libraries link against the following libraries:

1. LibNUMA: `-lnuma`
2. Standard math library: `-lm`
3. POSIX threads: `-lpthread`
4. OpenMP: `-fopenmp` in the case of GCC

# Optional dependences

The below summarises the dependences for optional features.

## Distributed-memory auto-parallelisation

For distributed-memory parallelisation, the Lightweight Parallel Foundations
(LPF) communication layer, version 1.0 or higher, is required. ALP makes use
of the LPF core library and its collectives library. The LPF library has its
further dependences, which are all summarised on the LPF project page:

* [Gitee](https://gitee.com/CSL-ALP/lpf);
* [GitHub](https://github.com/Algebraic-Programming/LPF).

The dependence on LPF applies to compilation, linking, and run-time. Fulfilling
the dependence enables the `bsp1d` and `hybrid` ALP/GraphBLAS backends.

## Code documentation

For generating the code documentations:
* `doxygen` reads code comments and generates the documentation;
* `graphviz` generates various diagrams for inheritance, call paths, etc.;
* `pdflatex` is required to build the PDF file out of the Latex generated
  documentation.

## Code coverage

For code/test coverage, a native implementation is available using the CMake infrastructure, using `gcovr` and `gcov`/`lcov`.

# Very quick start

Here are example steps to compile and install ALP for shared-memory machines
without distributed-memory support. The last three commands show-case the
compilation and execution of the `sp.cpp` example program.

```bash
cd <ALP/root/dir>
mkdir build
cd build
../bootstrap.sh --prefix=../install
make -j
make -j install
source ../install/bin/setenv
grbcxx ../examples/sp.cpp
grbrun ./a.out
```

# Quick start

In more detail, the steps to follow are:

1. Edit the `include/graphblas/base/config.hpp`. In particular, please ensure
   that `config::SIMD_SIZE::bytes` defined in that file is set correctly with
   respect to the target architecture.

2. Create an empty directory for building ALP and move into it:
   `mkdir build && cd build`.

3. Invoke the `bootstrap.sh` script located inside the ALP root directory
   `<ALP/root/dir>` to generate the build infrastructure via CMake inside the
   the current directory:

`<ALP/root/dir>/bootstrap.sh --prefix=</path/to/install/dir>`

- note: add `--with-lpf=/path/to/lpf/install/dir` if you have LPF installed
            and would like to use it.

4. Issue `make -j` to compile the C++11 ALP library for the configured backends.

5. (*Optional*) To later run all unit tests, several datasets must be made
   available. Please run the `<ALP/root/dir>/tools/downloadDatasets.sh`
   script for

a. an overview of datasets required for the basic tests, as well as

b. the option to automatically download them.

6. (*Optional*) To make the ALP documentation, issue `make userdocs`. This
   generates both

a. LaTeX in `<ALP build dir>/docs/user/latex/refman.tex`, and

b. HTML in `<ALP build dir>/docs/user/html/index.html`.

To build a PDF from the LaTeX sources, cd into the directory mentioned, and
   issue `make`.

7. (*Optional*) Issue `make -j smoketests` to run a quick set of functional
   tests. Please scan the output for any failed tests.
   If you do this with LPF enabled, and LPF was configured to use an MPI engine
   (which is the default), and the MPI implementation used is _not_ MPICH, then
   the default command lines the tests script uses are likely wrong. In this
   case, please edit `tests/parse_env.sh` by searching for the MPI
   implementation you used, and uncomment the lines directly below each
   occurrence.

8. (*Optional*) Issue `make -j unittests` to run an exhaustive set of unit
   tests. Please scan the output for any failed tests.
   If you do this with LPF enabled, please edit `tests/parse_env.sh` if required
   as described in step 5.

9. Issue `make -j install` to install ALP into the install directory configured
   during step 1.

10. (*Optional*) Issue `source </path/to/install/dir>/bin/setenv` to make
    available the `grbcxx` and `grbrun` compiler wrapper and runner.

Congratulations, you are now ready for developing and integrating ALP
algorithms! Any feedback, question, problem reports are most welcome at

<div align="center">
<a href="mailto:albertjan.yzelman@huawei.com">albertjan.yzelman@huawei.com</a>
</div>

# Additional Contents

The remainder of this file summarises configuration options, additional build
system targets, how to integrate ALP programs into applications, debugging, and
contribute to ALP development. Finally, this README acknowledges contributors
and lists technical papers.

- [Minimal requirements](#minimal-requirements)
  - [Compilation](#compilation)
  - [Linking and run-time](#linking-and-run-time)
- [Optional dependences](#optional-dependences)
  - [Distributed-memory auto-parallelisation](#distributed-memory-auto-parallelisation)
  - [Code documentation](#code-documentation)
  - [Code coverage](#code-coverage)
- [Very quick start](#very-quick-start)
- [Quick start](#quick-start)
- [Additional Contents](#additional-contents)
- [Configuration](#configuration)
  - [Reference and reference\_omp backends](#reference-and-reference_omp-backends)
  - [OpenMP backends](#openmp-backends)
  - [LPF backends](#lpf-backends)
  - [Utilities](#utilities)
  - [Others](#others)
- [Overview of the main Makefile targets](#overview-of-the-main-makefile-targets)
- [Automated performance testing](#automated-performance-testing)
- [Integrating ALP with applications](#integrating-alp-with-applications)
  - [Running ALP programs as standalone executables](#running-alp-programs-as-standalone-executables)
    - [Implementation](#implementation)
    - [Compilation](#compilation-1)
    - [Linking](#linking)
    - [Running](#running)
    - [Threading](#threading)
  - [Running parallel ALP programs from existing parallel contexts](#running-parallel-alp-programs-from-existing-parallel-contexts)
    - [Implementation](#implementation-1)
    - [Running](#running-1)
  - [Integrating ALP within your coding project](#integrating-alp-within-your-coding-project)
- [Debugging](#debugging)
- [Development in ALP](#development-in-alp)
- [Acknowledgements](#acknowledgements)
- [Citing ALP, ALP/GraphBLAS, and ALP/Pregel](#citing-alp-alpgraphblas-and-alppregel)

# Configuration

ALP employs configuration headers that contain `constexpr` settings that take
effect every time ALP programs are compiled. Multiple object files that were
compiled using ALP must all been compiled using the same configuration
settings-- linking objects that have been compiled with a mixture of
configurations are likely to incur undefined behaviour. The recommendation is
to set a configuration before building and installing ALP, and to keep the
installation directories read-only so that configurations remain static.

There exists one main configuration file that affects all ALP backends, while
other configuration files only affect a specific backend or only affect specific
classes of backends. The main configuration file is found in
`<root>/include/graphblas/base/config.hpp`, which allows one to set the

1. cache line size, in bytes, within the `CACHE_LINE_SIZE` class;
2. SIMD width, in bytes, within the `SIMD_SIZE` class;
3. default number of experiment repetitions during benchmarking, within the
   `BENCHMARKING` class;
4. L1 data cache size, in bytes, within `MEMORY::big_memory` class;
5. from which size onwards memory allocations will be reported, in log-2
   bytes, within `MEMORY::big_memory`;
6. index type used for row coordinates, as the `RowIndexType` typedef;
7. index type used for column coordinates, as the `ColIndexType` typedef;
8. type used for indexing nonzeroes, as the `NonzeroIndexType` typedef;
9. index type used for vector coordinates, as the `VectorIndexType` typedef.

Other configuration values in this file are automatically inferred, are fixed
non-configurable settings, or are presently not used by any ALP backend.

## Reference and reference_omp backends

The file `include/graphblas/reference/config.hpp` contain defaults that pertain
to the auto-vectorising and sequential `reference` backend, but also to the
shared-memory auto-parallelising `reference_omp` backend. It allows one to set

1. whether prefetching is enabled in `PREFETCHING::enabled`;
2. the prefetch distance in `PREFETCHING::distance`;
3. the default memory allocation strategy for thread-local data in
   `IMPLEMENTATION::defaultAllocMode()`;
4. same, but for shared data amongst threads in
   `IMPLEMENTATION::sharedAllocMode()`;

Modifying any of the above should be done with utmost care as it typically
affects the defaults across an ALP installation, and *all* programs compiled
using it. Configuration elements not mentioned here should not be touched by
users, and rather should concern ALP developers only.

## OpenMP backends

The file `include/graphblas/omp/config.hpp` contains some basic configuration
parameters that affect any OpenMP-based backend. However, the configuration
file does not contain any other user-modifiable settings, but rather contains
a) some utilities that OpenMP-based backends may rely on, and b) default
that are derived from other settings described in the above. These settings
should only be overridden with compelling and expert knowledge.

## LPF backends

The file `include/graphblas/bsp/config.hpp` contains some basic configuration
parameters that affect any LPF-based backend. It includes:

1. an initial maximum of LPF memory slot registrations in `LPF::regs()`;
2. an initial maximum of LPF messages in `LPF::maxh()`.

These defaults, if insufficient, will be automatically resized during execution.
Setting these large enough will therefore chiefly prevent buffer resizes at run-
time. Modifying these should normally not lead to significant performance
differences.

## Utilities

The file `include/graphblas/utils/config.hpp` details configurations of various
utility functions, including:

1. a buffer size used during reading input files, in `PARSER::bsize()`;
2. the block size of individual reads in `PARSER::read_bsize()`.

These defaults are usually fine except when reading from SSDs, which would
benefit of a larger `read_bsize`.

## Others

While there are various other configuration files (find `config.hpp`), the above
should list all user-modifiable configuration settings of interest. The
remainder pertain to configurations that are automatically deduced from the
aforementioned settings, or pertain to settings that describe how to safely
compose backends and thus only are of interest to ALP developers.

# Overview of the main Makefile targets

The following table lists the main build targets of interest:

| Target                | Explanation |
|----------------------:|---------------------------------------------------|
| \[*default*\]         | builds the ALP libraries and examples, including  |
|                       | Sparse BLAS libraries generated by ALP            |
| `install`             | install libraries, headers and some convenience   |
|                       | scripts into the path set via `--prefix=<path>`   |
| `unittests`           | builds and runs all available unit tests          |
| `smoketests`          | builds and runs all available smoke tests         |
| `perftests`           | builds and runs all available performance tests   |
| `tests`               | builds and runs all available unit, smoke, and    |
|                       | performance tests                                 |
| `userdocs`            | builds HTML and LaTeX documentation corresponding |
|                       | to the public ALP API                             |
| `devdocs`             | builds HTML and LaTeX code documentation for      |
|                       | developers of the ALP internals                   |
| `docs`                | build both the user and developer code            |
|                       | documentation                                     |

For more information about the testing harness, please refer to the
[related documentation](tests/Tests.md).

For more information on how the build and test infrastructure operate, please
refer to the [the related documentation](docs/Build_and_test_infra.md).

# Automated performance testing

To check in-depth performance of this ALP implementation, issue
`make -j perftests`. This will run several algorithms in several ALP
configurations. This generates three main output files:

1. `<ALP/build/dir>/tests/performance/output`, which summarises the whole run;

2. `<ALP/build/dir>/tests/performance/output/benchmarks`, which summarises the
   performance of individual algorithms; and

3. `<ALP/build/dir>/tests/performance/output/scaling`, which summarises operator
   scaling results.

To ensure that all tests run, please ensure that all related datasets are
available, as also described at step 5 of the quick start.

With LPF enabled, please note the remark described at steps 3 and 7 of the quick
start guide. If LPF was not configured using MPICH, please review and apply any
necessary changes to `tests/performance/performancetests.sh`.

# Integrating ALP with applications

There are several use cases in which ALP can be deployed and utilised, listed
in the following. These assume that the user has installed ALP in a dedicated
directory via `make install`.

## Running ALP programs as standalone executables

### Implementation

The `grb::Launcher< AUTOMATIC >` class abstracts a group of user processes that
should collaboratively execute any single ALP program. The ALP program of
interest must have the following signature:

```
void grb_program( const T& input_data, U& output_data )
```

The types `T` and `U` can be any plain-old-data (POD) type, including structs --
these can be used to broadcast input data from the master process to all user
processes (`input_data`) -- and for data to be sent back on exit of the parallel
ALP program.

The above sending-and-receiving across processes applies only to ALP
implementations and backends that support or require multiple user processes;
both the sequential `reference` and the shared-memory parallel `reference_omp`
backends, for example, support only one user process.

In case of multiple user processes, the overhead of the broadcasting of input
data is linear in the number of user processes, as well as linear in the byte-
size of `T` which hence should be kept to a minimum. A recommended use of this
mechanism is, e.g., to broadcast input data locations; any additional I/O
should use the parallel I/O mechanisms that ALP exposes to the ALP program
itself.

Output data is retrieved only from the user process with ID `0`, even if
multiple user processes exist. Some implementations or systems may require
sending back the output data to a calling process, even if there is only
one user process. The data movement cost incurred should hence be considered
linear in the byte size of `U`, and, similar to the input data broadcasting,
the use of parallel I/O facilities from the ALP program itself for storing
large outputs is strongly advisable.

### Compilation

Our backends auto-vectorise, hence please recall step 1 from the quick start
guide, and make sure the `include/graphblas/base/config.hpp` file reflects the
correct value for `config::SIMD_SIZE::bytes`. This value must be updated prior
to the compilation and installation of ALP.

When targeting different architectures with differing SIMD widths, different
ALP installations for different architectures could be maintained.

ALP programs may be compiled using the compiler wrapper `grbcxx` that is
generated during installation. To compile high-performance code when compiling
your programs using the ALP installation, the following flags are recommended:

- `-DNDEBUG -O3 -mtune=native -march=native -funroll-loops`

Omitting these flags for brevity, some compilation examples follow.

When using the LPF-enabled hybrid shared- and distributed-memory ALP backends,

```bash
grbcxx -b hybrid
```

as the compiler command. To show all flags that the wrapper passes on, please
use

```bash
grbcxx -b hybrid --show
```

and append your regular compilation arguments.

The `hybrid` backend is capable of spawning multiple ALP user processes. In
contrast, compilation using

```bash
grbcxx -b reference
```

produces a sequential binary, while

```bash
grbcxx -b reference_omp
```

produces a shared-memory parallel binary.

Note that the ALP source code never requires change while switching backends.

### Linking

The executable must be statically linked against an ALP library that is
different depending on the selected backend.
The compiler wrapper `grbcxx` takes care of all link-time dependencies
automatically.
When using the LPF-enabled BSP1D backend to ALP, for example, simply use
`grbcxx -b bsp1d` as the compiler/linker command.

Use

```bash
grbcxx -b bsp1d --show <your regular compilation command>
```

to show all flags that the wrapper passes on.

### Running

The resulting program has run-time dependencies that are taken care of by the
LPF runner `lpfrun` or by the ALP runner `grbrun`.

We recommend using the latter:

```bash
grbrun -b hybrid -np <P> </path/to/my/program>
```

Here, `P` is the number of requested ALP user processes.

### Threading

The `hybrid` backend employs threading in addition to distributed-memory
parallelism. To employ threading to use all available hyper-threads or cores
on a single node, the `reference_omp` backend may be selected instead.

In both cases, make sure that during execution the `OMP_NUM_THREADS` and
`OMP_PROC_BIND` environment variables are set appropriately on each node that
executes ALP user process(es).

## Running parallel ALP programs from existing parallel contexts

This, instead of automatically spawning a requested number of user processes,
assumes a number of processes already exist and that we wish those processes to
jointly execute a single parallel ALP program.

### Implementation

The binary that contains the ALP program to be executed must define the
following global symbol with the given value:

```c++
const int LPF_MPI_AUTO_INITIALIZE = 0
```

A program may then again be launched via the Launcher, but in this case the
`MANUAL` template argument should be used instead.
This specialisation disallows the use of a default constructor.
Instead, construction requires four arguments as follows:

```c++
grb::Launcher< MANUAL > launcher( s, P, hostname, portname )
```

Here, `P` is the total number of processes that should jointly execute a
parallel ALP program, while `0 <= s < P` is a unique ID of this process amongst
its `P`-1 siblings. The types of `s` and `P` are `size_t`, i.e., unsigned
integers.

One of these processes must be selected as a connection broker prior to forming
a group of ALP user processes. The remainder `P-1` processes must first connect
to the chosen broker using TCP/IP connections. This choice must be made outside
of ALP, prior to setting up the launcher, and materialises as the `hostname` and
`portname` Launcher constructor arguments. The host and port name are strings,
and must be equal across all processes.

As before, and after the successful construction of a manual launcher instance,
a parallel ALP program is launched via

```c++
grb::Launcher< MANUAL >::exec( &grb_program, input, output )
```

in exactly the same way as described earlier, though with the input and output
arguments now being passed in a one-to-one fashion:
  1. The input data is passed on from the original process to exactly one
     corresponding ALP user process; i.e., no broadcast occurs. The original
     process and the ALP user process are, from an operating system point of
     view, the same process. Therefore, and additionally, input no longer needs
     to be a plain-old-data (POD) type. Pointers, for example, are now perfectly
     valid to pass along, and enable sharing data between the original process
     and the ALP algorithm.
  2. The output data is passed from each ALP user process to the original
     process that called `Launcher< MANUAL >::exec`. To share ALP vector data,
     it is, for example, legal to return a `grb::PinnedVector< T >` as the
     `exec` output argument type. Doing so is akin to returning a pointer to
     output data, and does not explicitly pack nor transmit vector data.

### Running

The pre-existing process must have been started using an external mechanism.
This mechanism must include run-time dependence information that is normally
passed by the ALP runner whenever a distributed-memory parallel backend is
selected.

If the external mechanism by which the original processes are started allows it,
this is most easily effected by using the standard `grbcxx` launcher while
requesting only *one* process only, e.g.,

```bash
grbrun -b hybrid -n 1 </your/executable>
```

If the external mechanism does not allow this, then please execute e.g.

```bash
grbrun -b hybrid -n 1 --show </any/executable>
```

to inspect the run-time dependences and environment variables that must be made
available, resp., set, as part of the external mechanism that spawns the
original processes.

## Integrating ALP within your coding project

Please see [this article](docs/Use_ALPGraphBLAS_in_your_own_project.md) on how
to add ALP and ALP/GraphBLAS as a dependence to your project.

# Debugging

To debug an ALP program, please compile it using the sequential reference
backend and use standard debugging tools such as `valgrind` and `gdb`.
Additionally, please ensure to *not* pass the `-DNDEBUG` flag during
compilation.

If bugs appear in one backend but not another, it is likely you have found a bug
in the former backend. Please send a minimum working example that demonstrates
the bug to the maintainers, either as an issue on or an email to:
  1. [GitHub](https://github.com/Algebraic-Programming/ALP/issues);
  2. [Gitee](https://gitee.com/CSL-ALP/graphblas/issues);
  3. [Albert-Jan](mailto:albertjan.yzelman@huawei.com).

# Development in ALP

Your contributions to ALP would be most welcome. Merge Requests (MRs) can be
contributed via Gitee and GitHub; see above for the links.

For the complete development documentation, you should start from the
[docs/README file](docs/README.md) and the related
[Development guide](docs/Development.md).

# Acknowledgements

The LPF communications layer was primarily authored by Wijnand Suijlen, without
whom the current ALP would not be what it is now.

The collectives library and its interface to the ALP was primarily authored by
Jonathan M. Nash.

The testing infrastructure that performs smoke, unit, and performance testing of
sequential, shared-memory parallel, and distributed-memory parallel backends was
primarily developed by Daniel Di Nardo.

ALP and ALP/GraphBLAS have since developed significantly, primarily through
efforts by researchers at the Huawei Paris and Zürich Research Centres, and the
Computing Systems Laboratory in Zürich in particular. See the [NOTICE](NOTICE)
file for individual contributors.

# Citing ALP, ALP/GraphBLAS, and ALP/Pregel

If you use ALP in your work, please consider citing one or more of the following
papers, as appropriate.

## ALP and ALP/GraphBLAS

- [A C++ GraphBLAS: specification, implementation, parallelisation, and evaluation](http://albert-jan.yzelman.net/PDFs/yzelman20.pdf)
   by A. N. Yzelman, D. Di Nardo, J. M. Nash, and W. J. Suijlen (2020).
   Pre-print.
   [Bibtex](http://albert-jan.yzelman.net/BIBs/yzelman20.bib).
 - [Nonblocking execution in GraphBLAS](https://ieeexplore.ieee.org/document/9835271)
   by Aristeidis Mastoras, Sotiris Anagnostidis, and A. N. Yzelman
   in IEEE International Parallel and Distributed Processing Symposium
   Workshops, 2022.
   [Bibtex](http://albert-jan.yzelman.net/BIBs/mastoras22.bib).
 - [Design and implementation for nonblocking execution in GraphBLAS: tradeoffs and performance](https://dl.acm.org/doi/10.1145/3561652)
   by Aristeidis Mastoras, Sotiris Anagnostidis, and A. N. Yzelman
   in ACM Transactions on Architecture and Code Optimization 20(1), 2023.
   [Bibtex](http://albert-jan.yzelman.net/BIBs/mastoras22a.bib).

## ALP/Pregel

- [Humble Heroes](http://albert-jan.yzelman.net/PDFs/yzelman22-pp.pdf)
   by A. N. Yzelman (2022). Pre-print.
   [Bibtex](http://albert-jan.yzelman.net/BIBs/yzelman22.bib).

ALP

ALP 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

ALP

ALP 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README