LinuxMint18i3

KO | EN

gitlite — search

#javascript #hacktoberfest #react #ai #golang #go #machine-learning #rust #macos #kubernetes #vue #pytorch #security #open-source

(★ 42)

How to install i3 on Linux Mint 18 Cinnamon and copy all my settings in the process to have a awesome desktop

LinuxMint18i3 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Installing i3 on Linux Mint 18 Cinnamon

I3 = [improved tiling windows manager](https://i3wm.org/)

We start from an up-to-date Linux Mint 18 Cinnamon as described on 
http://erikdubois.be.

As described here at [this github](https://github.com/erikdubois/Ultimate-Linux-Mint-18-Cinnamon)

or described in [this youtube movie](https://www.youtube.com/watch?v=5db66Dt0j4E).

You will end up with all the needed icons and applications we will use in the I3 tutorials.

![Screenshots](http://i.imgur.com/QSggN1G.jpg)

We will be using the following applications in the I3 tutorials :

+ variety

# Prerequisites

First install Linux Mint 18 Cinnamon like you always would.

Then update.

Download and use proprietary drivers if needed.
Broadcom, nvidia, ati and the likes.

Upgrade your kernel if you want to.

Get that out of the way.

Get the code from github. Install git first

sudo apt-get install git

Then

git clone https://github.com/erikdubois/i3-on-Linux-Mint-18-Cinnamon.git

This folder, your are downloading, is all you will need to get I3 working the easy way.

## Contents of the github

Folder Installation is the sequence of the installation procedure you can follow till the last one or not.

Folder I3 are all the settings to get a working I3 and it is in the folder Step 4.

# Installation Procedure of I3

Let us install I3 first. Go inside the folder Installation. You will find folders that are to be run in sequence. The folders are named according to our titles.

# Step 1

### Folder 1-i3-from-repo

First we will get I3 from the Linux Mint Repositories (version 4.11) by running the script

install_i3_version_4.11_from_repositories.sh

### Folder 2-i3_with_gaps

Install first the dependencies.

0_install_dependencies_for_both_scripts.sh

Then we need to run a script to install a xcb-util-xrm. This package is not yet included in the repositories at mid september 2016. So we compile it ourselves. In the future this can be done easier if it is in the repo's.

1_install_xcb-util-xrm.sh

Next we will run a script to get I3 and its dependancies (version 4.12) with the possibility to have [gaps between the windows](https://github.com/Airblader/i3) by running

2_install_i3_gaps_next.sh

The added advantage is that we will have the latest version of I3 as you can see on the [website](https://i3wm.org/).

# Step 2

We will install an extra menu to start applications. This menu is quite interesting as the menu is based on the .desktop files in your /usr/share/applications. Other menu's tend to show ALL programs. In linux this can be quite a long series.

Run the script to get this extra [j4-desktop-dmenu](https://github.com/enkore/j4-dmenu-desktop).

j4-dmenu-desktop_install.sh

# Step 3

Now we will install software that is needed specifically for the use in I3.

Run the script

install-extra-software.sh

You will install

- numlockx to enable the numeric key
- feh will help changing the wallpapers from variety
- lxappearance to change icons, themes and cursors
- scrot to take a quick screenshot of your desktop
- compton to enable some dimming of unfocused windows
- unclutter to get rid of the mouse icon if it is in the way
- volti to have a panel icon to adjust sound volume
- traded volti in for pasystray to change the volume due to the bluetooth headset
- terminator - different terminal you can fine-tune in look

# Step 4

When you install i3 it will make an hidden folder in this location, once you login.

~/.config/i3

You have to copy/paste the content of the i3 folder into ~/.config/i3.

You have to make this folder yourself. It is normal that you do not have it.

You never logged in with I3.

Beware the hidden files !! Copy/paste all files (CTRL + H)
 
 At this point we have no hidden files but there might be more in the future.

Some explanations

+ config is the most important file - here all the settings of I3 that can be changed
+ i3status.conf is the configuration file for you bottom panel that can be changed
+ i3exit.sh is used to logoff, exit, reboot etc - no need to change this
+ compton.conf is telling the system to dim the windows that have no focus that can be changed
+ start-conkys.sh will start the two conky's present 
+ system-overview conky will show process and memory
+ system-shortcuts conky will help you with the shortcuts

# Step 5

## Change the looks

Use lxappearance to change icons, themes etc ...
Restart programs to see the changes.

In this folder you will find two files. If you have issues changing the icons etc you can check out my settings of these files

This file should be in your home directory as a hidden file. Compare or copy/paste.

.gtkrc-2.0

The other file is a bit deeper in the folder structure.

~/.config/gtk-3.0/settings.ini

Compare your settings or copy/paste to this location.

# Step 6

If you want the conky's to work you will have to run the installation script for the software.

install-conky-software.sh

If you want to have a status bar based on a conky (step 10) you will need this too.

# Step 7

Nothing yet to share in the folder step 7.

## I3 is MADE for DUAL and more SCREENS

The program xrandr will show you how your monitors are named.
In the config file you will need to change the code.

Uncomment the ones you need. This is my setup.

set $firstMonitor DVI-I-1

set $secondMonitor DVI-I-2

Use this code in your config or terminal (only once) to tell the system which monitor goes on the left.

xrandr --output DVI-I-2 --right-of DVI-I-1 --auto

# Step 8

Not necessary to do.

The terminal is a place you will be working a lot. I have terminator as terminal. In all distro's it is available and it provides transparency of the background so we can look at the wallpaper provided by variety.

These are my settings. Put them in this folder. Compare or copy/paste.

~/.config/terminator/config

# Step 9

These are all my config files or settings of a wide variety of applications.

Not necessary to do.

# Extra info

## Nitrogen

You can set your wallpaper with nitrogen also if variety (or feh) does not prove to work.

sudo apt install nitrogen

# Shortcuts to remember

The best thing to do is :

read the config file in the folder ~/.config/i3

If in a hurry, you can always check the conky or this website.

## Mod key

You can set your mod key. I have set mine to the Windows Key

This line in your config file you set the windows key or super key.

set $mod Mod4

Some commands working with the Mod Key (windows key)

Mod + SHIFT + E  = to exit i3 and log back on with Cinnamon

Mod + D  = dmenu

Mod + SHIFT + D = j4_dmenu

Mod + Enter = terminal

Mod + SHIFT + Enter= nemo (file manager)

Mod + SHIFT + Q = end current program (move mouse over it)

## Assign section

Remember the 10 possible screens in the bottom-left corner.
I have positioned some programs on some specific desktops.

assign [class="Firefox"]          → 1

assign [class="sublime-text"]     → 2

assign [class="sublime_text"]     → 2

assign [class="Sublime_text"]     → 2

assign [class="Vlc"]              → 7

assign [class="Nemo"]             → 8

assign [class="Geary"]            → 9

assign [class="Evolution"]        → 9

assign [class="Spotify"]          → 10

Tip : if you use sublime-text. It gives us 'nag screens' to buy it. They will pop up in workspace 2 because of my setting.

## Reload the config

Mod4 + SHIFT + R = reset or rerun i3 if you change some code in the config file

## Start up programs with CTRL + ALT + ...

ALT = Mod1 for I3

So CTRL + ALT + f will start firefox. Change the shortcuts if you do not like them in the config file.

bindsym control+Mod1+f exec firefox

bindsym control+Mod1+g exec geary

bindsym control+Mod1+e exec evolution

bindsym control+Mod1+s exec spotify

bindsym control+Mod1+t exec subl

bindsym control+Mod1+b exec nemo --no-desktop

bindsym control+Mod1+n exec cinnamon-settings

bindsym control+mod1+m exec gnome-system-monitor

# You can stop here, log off and try-out I3

Log in by clicking the symbol in the top right of the login screen and choose i3.
I am set to autologin. It will remember your preferences to log in next time.

# What will happen when you login

Firefox will start on workspace 1.
Sublime Text will start on workspace 2.
Nemo will start on workspace 8.

Spotify will start on any workspace... 
There is a bug/issue we have to live with. Put your mouse on top of spotify and press
	
	mod (i.e.windows or super) and SHIFT and 0 to move it to window 10 for example

In the mean time I have a fix for spotify in the config.

#fix for spotify not moving to workspace 10
	for_window [class="Spotify"] move to workspace 10

# E N D   R E S U L T

![Screenshots](http://i.imgur.com/5RZaVMg.jpg)

Conky to help you with the basic information and the basic keyboard shortcuts

![Screenshots](http://i.imgur.com/irN98nN.jpg)

Lxappearance to change icons, themes, ...

![Screenshots](http://i.imgur.com/UcmfwmS.jpg)

# Step 10 for the never satisfied and always learning or the die hards.

This is the standard i3statusbar but already personalised.

![Screenshots](http://i.imgur.com/Xz1Q0ss.jpg)

## Conky folder

You can have a conky instead of the standard i3statusbar.

![Screenshots](http://i.imgur.com/ogYQLaV.jpg)

## i3 blocks

You can have other information in your i3statusbar. You can use i3 blocks from
https://github.com/vivien/i3blocks as well

![Screenshots](http://i.imgur.com/JExirXa.jpg)

## Dunst

An alternative to libnotify. Sends messages to the user. Next song etc..
You can set the look via dunstrc file.

![Screenshots](http://i.imgur.com/SVrdzsh.jpg)

# F  A  Q
--------------------

# What can you do if the script does not execute?

Since I sometimes forget to make the script executable, I include here what you can do to solve that.

A script can only run when it is marked as an executable.

ls -al

Above code will reveal if a script has an "x". X meaning executable.
Google "chmod" and "execute" and you will find more info.

For now if this happens, you should apply this code in the terminal and add the file name.

chmod +x typeyourfilename

Then you can execute it by typing

./typeyourfilename

Or you can follow these steps

![Screenshots](http://i.imgur.com/vXsOaFL.gif)

-------------------------------------------------
# But that is the fun in Linux.

You can do whatever Y O U want.

Share the knowledge.

I share my knowledge at http://erikdubois.be
------------------------------------------------

LinuxMint18i3

LinuxMint18i3 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

LinuxMint18i3

LinuxMint18i3 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README