KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#typescript #ai-agents #cli #open-source #ai #claude-code #codex #deepseek-harness #dsh-plugin #react #windows #developer-tools

OneWire

★ 32 Open GitHub ↗

One Wire via DS2482-100 or DS2482-800 for Windows or Linux based Raspberry Pi IoT solutions

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

One Wire in .NET C# for Raspberry Pi
=========================
via DS2482-100 or DS2482-800 for Windows IoT Core or Linux on Raspberry Pi

A new version built on top of System.Device.Gpio enabling this project to target .NET Standard 2.0

This is made possible by the awesome work done by the ".NET Core IoT Libraries" project https://github.com/dotnet/iot/

Introduction
------------

A powerful library for a simple and easy to use API when communicating with One Wire devices via I2C on Raspberry Pi.

using (var ds2482_800 = await _dS2482DeviceFactory.CreateDS2482_800(false, false, false))
    using (var ds2482_100 = await _dS2482DeviceFactory.CreateDS2482_100(true, true))
    {
        while (true)
        {
            foreach (var device in ds2482_800.GetDevices<DS18S20>())
            {
                var result = device.GetTemperature();
                var extendedResult = device.GetExtendedTemperature();
                Debug.WriteLine($"DS2482-800, DS18S20 result {result}");
                // Insert code to log result in some way
            }

foreach (var device in ds2482_800.GetDevices<DS18B20>())
            {
                var result = device.GetTemperature();
                Debug.WriteLine($"DS2482-800, DS18B20 result {result}");

// Insert code to log result in some way
            }

foreach (var device in ds2482_100.GetDevices<DS18S20>())
            {
                var result = device.GetTemperature();
                var extendedResult = device.GetExtendedTemperature();
                Debug.WriteLine($"DS2482_100, DS18S20 result {result}");

// Insert code to log result in some way
            }

foreach (var device in ds2482_100.GetDevices<DS18B20>())
            {
                var result = device.GetTemperature();
                Debug.WriteLine($"DS2482-100, DS18B20 result {result}");

// Insert code to log result in some way
            }

await Task.Delay(5000);
        }
    }

And thats all you need to get started with measuring temperatures with a DS18B20 from .NET and C# on Raspberry Pi.

Headed apps
-----------
Headed apps do not currently support disposing the DS2482 devices. The instance MUST be reused between measurements.

I2C Address
-----------

Multiple DS2482-100 and DS2482-800 are supported at the same time on the same bus, the bus control flags are exposed via IDS2482DeviceFactory CreateDS2482_100(bool ad0, bool ad1) and CreateDS2482_800(bool ad0, bool ad1, bool ad2). 
True/False is the same as high/low on the AD0, AD1 and AD2 pins on the devices.

If the address is wrong or the device is connected in a bad way there will be a DS2482100DeviceNotFoundException thrown that will indicate that there is no connection to the DS2482 device but it does not know if it is related to addressing problems or physical connection problems, or i there is no device connected at all.

Built in One Wire Device Support
---------------------------------
## Today:
1. DS18B20
2. DS18S20

## Extend with your own device

oneWireDeviceHandler.AddDeviceType<MyDeviceType>(OneWireFamilyCode);

Add the type and it´s one wire family code to the device handler, if there is no matching family code when new devices is discovered the will be created as a UnknownOneWireDevice.

The provided type also has to implement the IOneWireDevice interface.

public interface IOneWireDevice
    {
        DS2482Channel DS2482Channel { get; }

byte[] OneWireAddress { get; }

void Initialize(DS2482Channel ds2482, byte[] oneWireAddress);
    }

For more information on how this works check the DS18B20 implementation.

OneWire

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README