KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#dsh #dsh-plugin #developer-tools #ai-agent #claude-code #codex #typescript #ai-agents #deepseek-harness #mcp #cli #rust

iar-vsc-build

★ 46 Open GitHub ↗

Visual Studio Code extension for developing and building IAR projects

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# IAR Build

Build and develop your IAR Embedded Workbench projects from Visual Studio Code.

* Build projects
* Manage project files
* Generate C-STAT messages and reports
* Use language features powered by the [C/C++ extension](https://marketplace.visualstudio.com/items?itemName=ms-vscode.cpptools)

An IAR Embedded Workbench or IAR Build Tools installation is required to use this extension. See [Compatibility](#compatibility) table below for detailed information.

> 💡️ To debug your Embedded Workbench projects from VS Code, please also see the [IAR C-SPY Debug extension](https://marketplace.visualstudio.com/items?itemName=iarsystems.iar-debug).

## Getting started

To get started, open a folder containing an IAR Embedded Workbench project.
A view with an IAR Embedded Workbench icon will appear in the left side panel:

![side bar view](https://raw.githubusercontent.com/IARSystems/iar-vsc-build/master/images/readme/sidebar.png)

Here you may select the desired IAR Embedded Workbench/Build Tools installation,
and the project and project configuration you want to work with. If your IAR Embedded Workbench or IAR Build Tools installation
is not found automatically, please see [Adding IAR Embedded Workbench/Build Tools installations](https://github.com/IARSystems/iar-vsc-build/blob/master/docs/README.md).

To build or analyze the selected project configuration, go to `Terminal->Run Task...` and then select either the `iar` or `iar-cstat` category.
To make this easier, you may wish to [Add a default build task](https://github.com/IARSystems/iar-vsc-build/blob/master/docs/README.md#setting-a-default-iar-build-task).

## Documentation

* [Configuring the Build extension](https://github.com/IARSystems/iar-vsc-build/blob/master/docs/README.md#ConfigExtension)

* [Making IAR Build settings](https://github.com/IARSystems/iar-vsc-build/blob/master/docs/README.md#iarbuildsettings)

* [Switching between VS Code and IAR Embedded Workbench](https://github.com/IARSystems/iar-vsc-build/blob/master/docs/README.md#SwitchingVSCodeEW)

* [Adding and removing source files](https://github.com/IARSystems/iar-vsc-build/blob/master/docs/README.md#AddingRemovingFiles)

* [IAR Build tasks](https://github.com/IARSystems/iar-vsc-build/blob/master/docs/README.md#IARBuildTasks)

* [Configuring build parameters](https://github.com/IARSystems/iar-vsc-build/blob/master/docs/README.md#ConfigBuildParameters)

* [IAR language extensions](https://github.com/IARSystems/iar-vsc-build/blob/master/docs/README.md#IARLanguageExtensions)

[Click here](https://github.com/IARSystems/iar-vsc-build/blob/master/docs/README.md) to view the full documentation.

## Compatibility

This extension is compatible with any versions of IAR Embedded Workbench (EW) or IAR Build Tools (BX) installations using IDE version 8 or newer.

The table below lists known limitations concerning earlier versions of both IAR products for each supported target architecture. Note that Files View support was introduced for BXARM on Windows in v9.40.1 and for BXARM on Linux in v9.50.1, otherwise the supported versions are the same for IAR Embedded Workbench and IAR Build Tools installations.

| Target architecture | Product Version | Known Limitation
|---------------------|-----------------|-----------
| Arm RISC-V 430 AVR RH850 RL78 RX | v9.30.1 or later v3.10.1 or later v8.10.1 or later v8.10.1 or later v3.10.1 or later v5.10.1 or later v5.10.1 or later | None.
| Arm | v9.20.4 | Batch builds do not persist in the workspace file.
| Arm RISC-V 430 AVR RH850 RL78 RX 8051 | v8.10.1-9.20.3 v1.10.1-2.11.1 v7.10.1-7.21.1 v7.10.1-7.30.5 v2.10.1-2.21.1 v3.10.1-4.21.4 v3.10.1-4.20.3 v10.10.1 or later | - Batch builds do not persist in the workspace file. - Adding/Removing files from a project is not supported. - Files view is not supported.

## Feedback

Depending on the type of feedback you want to share with us, here are our preferred options:

* For urgent matters with the extension, or if you have issues with the underlying IAR Embedded Workbench or IAR Build Tools product, report them via the [IAR Technical Support](https://www.iar.com/knowledge/support/request-technical-support/) channel.

* For other matters isolated to this extension, file a [New issue](https://github.com/IARSystems/iar-vsc-build/issues/new/choose) using the provided template. We will reply on a "best effort basis".

* If you have ideas on how to improve this extension, see [CONTRIBUTING.md](https://github.com/IARSystems/iar-vsc-build/blob/master/CONTRIBUTING.md) on how to proceed.

iar-vsc-build

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README