homeassistant_custom_siemensozw672

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

homeassistant_custom_siemensozw672

(★ 13)

Home Assistant Custom Component for Siemens OZW672

homeassistant_custom_siemensozw672 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Siemens OZW672 Integration for HomeAssistant

[![GitHub Release][releases-shield]][releases]
[![GitHub Activity][commits-shield]][commits]
[![License][license-shield]](https://raw.githubusercontent.com/johnaherninfotrack/homeassistant_custom_siemensozw672/main/LICENSE)

[![pre-commit][pre-commit-shield]][pre-commit]
[![Black][black-shield]][black]

[![hacs][hacsbadge]][hacs]
[![Project Maintenance][maintenance-shield]][user_profile]

[![Discord][discord-shield]][discord]
[![Community Forum][forum-shield]][forum]

## Overview

OZW672 is a Web server platform which enables remote plant monitoring for Siemens LPB/BSB Plants.
This integration was built and tested using a OZW672.01 running v11.0 firmware monitoring an RVS43.345/109 with 
three AVS73.390/109 extension modules.

Yes - you can use this integration to WRITE values to the OZW672.  Noting that:
1. The OZW672 only supports certain datapoints to have WriteAccess
2. This integration only supports writing for "Enumerations", "Numbers" and "Switch" domains.
3. Some values you write are ignored by the OZW672.  If that happens - test using the OZW672 UI.

Sensors Supported

| Platform        | Description                                                               |
| --------------- | ------------------------------------------------------------------------- |
| `binary_sensor` | Read only Show something `On` or `Off`.  eg a Pump                        |
| `sensor`        | Read only sensors that don't fit in any other category                    |
| `switch`        | Read/Writ eSwitch something `On` or `Off`.                                |
| `select`        | Read/Write selectable Enumerations                                        |
| `number`        | Read/Write Numbers - eg Temperature or Percentage                         |

![example][exampleimg]

## Disclaimer

**This is an independent, unofficial, community-developed project. It is not affiliated
with, endorsed by, sponsored by, or approved by Siemens AG or any of its subsidiaries.**

"Siemens", "OZW672", "RVS43", "AVS73" and other product and model designations are
trademarks or registered trademarks of Siemens AG or their respective owners. They are used
here **nominatively** — that is, solely to identify the hardware this integration
communicates with, as is permitted for accurate description of interoperability. No claim
to those marks is made or implied.

The icon and logo shipped with this integration are **original artwork created for this
project**. They are not Siemens assets, are not reproductions of any Siemens logo or
wordmark, and do not represent Siemens branding or an official Siemens product.

This integration talks to the OZW672 over the local HTTP API exposed by the device itself.
It contains no Siemens source code, firmware, or other proprietary Siemens material, and
distributes none.

The software is provided under the MIT License **without warranty of any kind** — see
[LICENSE](LICENSE). You use it, and any changes it writes to your equipment, at your own
risk.

If you are a rights holder and believe anything here misrepresents your brand, please open
an issue on the [issue tracker](https://github.com/johnaherninfotrack/homeassistant_custom_siemensozw672/issues)
and it will be addressed promptly.

## Installation

1. Use [HACS](https://hacs.xyz/docs/setup/download), in `HACS > Integrations Cick the three dots on the top right and select "Custom Repositories" and add a link to this GitHub Repository.
2. Click "Explore & Download Repositories", Search for "Siemens OZW672" and click "Download.  **Skip to step 8**
3. If no HACS, use the tool of choice to open the directory (folder) for your HA configuration (where you find `configuration.yaml`).
4. If you do not have a `custom_components` directory (folder) there, you need to create it.
5. In the `custom_components` directory (folder) create a new folder called `siemens_ozw672`.
6. Download _all_ the files from the `custom_components/siemens_ozw672/` directory (folder) in this repository.
7. Place the files you downloaded in the new directory (folder) you created.
8. Restart Home Assistant.
9. [![Add Integration][add-integration-badge]][add-integration] or in the HA UI go to "Settings" -> "Devices & Services" then click "+" and search for "Siemens OZW672 Integration".

Note: This integration will wake up your vehicle(s) during installation.
1. Add the custom repository in HACS
2. Install via HACS and restart HomeAssistant
3. Go to Settings -> Devices and "Add Integration". Select "Siemens OZW672"

## Configuration only supported by the UI

1. The OZW672 is not very powerful - LIMIT polling only variables you require.  You can discover entities to poll, then re-run and discover more.  Only discover max 10 at a time.
2. In my testing http was more scaleable than https - YOU MUST ENABLE THIS IN THE OZW672
3. https implementation does NOT check for valid server certificate
4. The component provides flexbility in naming your entities in two ways:
    <br>a. No Prefix.  eg. "Legionella function"
    <br>b. Prefix the datapoint with the Function/MenuItem name eg.  "DHW - Legionella function"
    <br>c. Prefix the datapoint with the Operating Line number from the manual eg. "1640 Legionella function"
    <br>d. Both Prefixes - eg: "DHW - 1640 Legionella function"

My recommendations for reliable operation:
1. Configure the OZW672 to use http. Home > 0.x OZW672.01 > Settings > Communication > Services > We access via http = ON
2. Configure the OZW672 to use static IP, Gateway & DNS. Home > 0.x OZW672.01 > Settings > Communication > Ethernet
3. Discover Functions one at a time.  The OZW672 is not powerful - discover one function and max 10 variables at a time.
4. Configure a dedicated user in teh OZW672 for your home assistant polling.  I used the "Service" user group.

## Contributions are welcome!

If you want to contribute to this please read the [Contribution guidelines](CONTRIBUTING.md)
Please make sure you enable debug and submit logs.

## Credits

This project was created in my spare time on an OZW671.01 monitoring my home Hydronic Plant.

This project was generated from [@oncleben31](https://github.com/oncleben31)'s [Home Assistant Custom Component Cookiecutter](https://github.com/oncleben31/cookiecutter-homeassistant-custom-component) template.

Code template was mainly taken from [@Ludeeus](https://github.com/ludeeus)'s [integration_blueprint][integration_blueprint] template

---

[integration_blueprint]: https://github.com/custom-components/integration_blueprint
[black]: https://github.com/psf/black
[black-shield]: https://img.shields.io/badge/code%20style-black-000000.svg?style=for-the-badge
[commits-shield]: https://img.shields.io/github/commit-activity/y/johnaherninfotrack/homeassistant_custom_siemensozw672.svg?style=for-the-badge
[commits]: https://github.com/johnaherninfotrack/homeassistant_custom_siemensozw672/commits/main
[hacs]: https://hacs.xyz
[hacsbadge]: https://img.shields.io/badge/HACS-Custom-orange.svg?style=for-the-badge
[discord]: https://discord.gg/Qa5fW2R
[discord-shield]: https://img.shields.io/discord/330944238910963714.svg?style=for-the-badge
[exampleimg]: example.png
[forum-shield]: https://img.shields.io/badge/community-forum-brightgreen.svg?style=for-the-badge
[forum]: https://community.home-assistant.io/
[license-shield]: https://img.shields.io/github/license/johnaherninfotrack/homeassistant_custom_siemensozw672.svg?style=for-the-badge
[maintenance-shield]: https://img.shields.io/badge/maintainer-%40johnaherninfotrack-blue.svg?style=for-the-badge
[pre-commit]: https://github.com/pre-commit/pre-commit
[pre-commit-shield]: https://img.shields.io/badge/pre--commit-enabled-brightgreen?style=for-the-badge
[releases-shield]: https://img.shields.io/github/release/johnaherninfotrack/homeassistant_custom_siemensozw672.svg?style=for-the-badge
[releases]: https://github.com/johnaherninfotrack/homeassistant_custom_siemensozw672/releases
[user_profile]: https://github.com/johnaherninfotrack
[add-integration]: https://my.home-assistant.io/redirect/config_flow_start?domain=siemens_ozw672
[add-integration-badge]: https://my.home-assistant.io/badges/config_flow_start.svg

homeassistant_custom_siemensozw672

homeassistant_custom_siemensozw672 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

homeassistant_custom_siemensozw672

homeassistant_custom_siemensozw672 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README