HikariCP

KO | EN

gitlite — search

#javascript #react #golang #android #machine-learning #rust #linux #macos #nodejs #java #cli #awesome-list #vue #open-source

(★ 21,188)

光 HikariCP・A solid, high-performance, JDBC connection pool at last.

파일 탐색기

최종 버전 다운로드 (.zip)

- config.yml
- - ci.yml
- org.eclipse.core.resources.prefs
- org.eclipse.jdt.apt.core.prefs
- org.eclipse.jdt.core.prefs
- org.eclipse.m2e.core.prefs
- org.eclipse.pde.core.prefs
- Wall-of-Fame.md
- Welcome-To-The-Jungle.md
.editorconfig
.gitignore
CHANGES
codecov.yml
install-jdk.sh
KEYS.txt
LICENSE
logo.png
osx-toolchains.xml
pom.xml
README.md

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

<h1><img src="https://github.com/brettwooldridge/HikariCP/wiki/Hikari.png"> HikariCP&nbsp;It's Faster.Hi·ka·ri [hi·ka·'lē] &#40;Origin: Japanese): light; ray.</h1>

[![][Build Status img]][Build Status]
[![][Coverage Status img]][Coverage Status]
[![][license img]][license]
![Maven Central Version](https://img.shields.io/maven-central/v/com.zaxxer/HikariCP?label=maven%20central&link=https%3A%2F%2Fcentral.sonatype.com%2Fartifact%2Fcom.zaxxer%2FHikariCP)
[![][Javadocs img]][Javadocs]
[![][Librapay img]][Librapay]

Fast, simple, reliable.  HikariCP is a "zero-overhead" production ready JDBC connection pool.  At roughly 165Kb, the library is very light.  Read about [how we do it here](https://github.com/brettwooldridge/HikariCP/wiki/Down-the-Rabbit-Hole).

&nbsp;&nbsp;&nbsp;**"Simplicity is prerequisite for reliability."** 
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;- *Dr. Edsger Dijkstra*

----------------------------------------------------

> [!IMPORTANT]
> In order to avoid a rare condition where the pool goes to zero and does not recover it is necessary to configure *TCP keepalive*. Some JDBC drivers support this via properties, for example ``tcpKeepAlive=true`` on PostgreSQL, but in any case it can also be configured at the OS-level. See [Setting OS TCP Keepalive](https://github.com/brettwooldridge/HikariCP/wiki/Setting-Driver-or-OS-TCP-Keepalive) and/or [TCP keepalive for a better PostgreSQL experience](https://www.cybertec-postgresql.com/en/tcp-keepalive-for-a-better-postgresql-experience/#setting-tcp-keepalive-parameters-on-the-operating-system).

----------------------------------------------------

### Index
* [Artifacts](#artifacts)
* [JMH Benchmarks](#checkered_flag-jmh-benchmarks)
* [Analyses](#microscope-analyses)
 * [Spike Demand Pool Comparison](#spike-demand-pool-comparison)
 * [You're probably doing it wrong](#youre-probably-doing-it-wrong)
 * [WIX Engineering Analysis](#wix-engineering-analysis)
 * [Failure: Pools behaving badly](#failure-pools-behaving-badly)
* [User Testimonials](#family-user-testimonials) 
* [Configuration](#gear-configuration-knobs-baby) 
 * [Essentials](#essentials)
 * [Frequently used](#frequently-used)
 * [Infrequently used](#infrequently-used)
* [Initialization](#rocket-initialization)

----------------------------------------------------

### Artifacts

_**Java 11+** maven artifact:_
```xml
<dependency>
 <groupId>com.zaxxer</groupId>
 <artifactId>HikariCP</artifactId>
 <version>7.1.0</version>
</dependency>
```
_Java 8 maven artifact (*deprecated*):_
```xml
<dependency>
 <groupId>com.zaxxer</groupId>
 <artifactId>HikariCP</artifactId>
 <version>4.0.3</version>
</dependency>
```
_Java 7 maven artifact (*deprecated*):_
```xml
<dependency>
 <groupId>com.zaxxer</groupId>
 <artifactId>HikariCP-java7</artifactId>
 <version>2.4.13</version>
</dependency>
```
_Java 6 maven artifact (*deprecated*):_
```xml
<dependency>
 <groupId>com.zaxxer</groupId>
 <artifactId>HikariCP-java6</artifactId>
 <version>2.3.13</version>
</dependency>
```
Or [download from here](http://search.maven.org/#search%7Cga%7C1%7Ccom.zaxxer.hikaricp).

----------------------------------------------------

### :checkered_flag: JMH Benchmarks

Microbenchmarks were created to isolate and measure the overhead of pools using the [JMH microbenchmark framework](http://openjdk.java.net/projects/code-tools/jmh/). You can checkout the [HikariCP benchmark project for details](https://github.com/brettwooldridge/HikariCP-benchmark) and review/run the benchmarks yourself.

![](https://github.com/brettwooldridge/HikariCP/wiki/HikariCP-bench-2.6.0.png)

* One *Connection Cycle* is defined as single ``DataSource.getConnection()``/``Connection.close()``.
 * One *Statement Cycle* is defined as single ``Connection.prepareStatement()``, ``Statement.execute()``, ``Statement.close()``.

1 Versions: HikariCP 2.6.0, commons-dbcp2 2.1.1, Tomcat 8.0.24, Vibur 16.1, c3p0 0.9.5.2, Java 8u111 
2 Intel Core i7-3770 CPU @ 3.40GHz 
3 Uncontended benchmark: 32 threads/32 connections, Contended benchmark: 32 threads, 16 connections 
4 Apache Tomcat fails to complete the Statement benchmark when the Tomcat StatementFinalizer is used <a href="https://raw.githubusercontent.com/wiki/brettwooldridge/HikariCP/markdown/Tomcat-Statement-Failure.md">due to excessive garbage collection times</a> 
5 Apache DBCP fails to complete the Statement benchmark <a href="https://raw.githubusercontent.com/wiki/brettwooldridge/HikariCP/markdown/Dbcp2-Statement-Failure.md">due to excessive garbage collection times</a>

----------------------------------------------------
### :microscope: Analyses

#### Spike Demand Pool Comparison
<a href="https://github.com/brettwooldridge/HikariCP/blob/dev/documents/Welcome-To-The-Jungle.md"><img width="400" align="right" src="https://github.com/brettwooldridge/HikariCP/wiki/Spike-Hikari.png"></a>
Analysis of HikariCP v2.6, in comparison to other pools, in relation to a unique "spike demand" load.

The customer's environment imposed a high cost of new connection acquisition, and a requirement for a dynamically-sized pool, but yet a need for responsiveness to request spikes. Read about the spike demand handling [here](https://github.com/brettwooldridge/HikariCP/blob/dev/documents/Welcome-To-The-Jungle.md).
 
 
#### You're [probably] doing it wrong
<a href="https://github.com/brettwooldridge/HikariCP/wiki/About-Pool-Sizing"><img width="200" align="right" src="https://github.com/brettwooldridge/HikariCP/wiki/Postgres_Chart.png"></a>
AKA *"What you probably didn't know about connection pool sizing"*. Watch a video from the Oracle Real-world Performance group, and learn about why database connections do not need to be so numerous as they often are. In fact, too many connections have a clear and demonstrable *negative* impact on performance; a 50x difference in the case of the Oracle demonstration. [Read on to find out](https://github.com/brettwooldridge/HikariCP/wiki/About-Pool-Sizing).
 
#### WIX Engineering Analysis
<a href="https://www.wix.engineering/blog/how-does-hikaricp-compare-to-other-connection-pools"><img width="180" align="left" src="https://github.com/brettwooldridge/HikariCP/wiki/Wix-Engineering.png"></a>
We'd like to thank the guys over at WIX for the unsolicited and deep write-up about HikariCP on their [engineering blog](https://www.wix.engineering/post/how-does-hikaricp-compare-to-other-connection-pools). Take a look if you have time.
 
 
 
#### Failure: Pools behaving badly
Read our interesting ["Database down" pool challenge](https://github.com/brettwooldridge/HikariCP/wiki/Bad-Behavior:-Handling-Database-Down).

----------------------------------------------------
#### "Imitation Is The Sincerest Form Of Plagiarism" - anonymous
Open source software like HikariCP, like any product, competes in the free market. We get it. We understand that product advancements, once public, are often co-opted. And we understand that ideas can arise from the zeitgeist; simultaneously and independently. But the timeline of innovation, particularly in open source projects, is also clear and we want our users to understand the direction of flow of innovation in our space. It could be demoralizing to see the result of hundreds of hours of thought and research co-opted so easily, and perhaps that is inherent in a free marketplace, but we are not demoralized. *We are motivated; to widen the gap.*

----------------------------------------------------
### :family: User Testimonials

[![](https://github.com/brettwooldridge/HikariCP/wiki/tweet3.png)](https://twitter.com/jkuipers) 
[![](https://github.com/brettwooldridge/HikariCP/wiki/tweet1.png)](https://twitter.com/steve_objectify) 
[![](https://github.com/brettwooldridge/HikariCP/wiki/tweet2.png)](https://twitter.com/brettemeyer) 
[![](https://github.com/brettwooldridge/HikariCP/wiki/tweet4.png)](https://twitter.com/dgomesbr/status/527521925401419776)

If you like this project, consider leaving a word for us on social media:

[![](https://raw.github.com/wiki/brettwooldridge/HikariCP/twitter.png)](https://twitter.com/share?text=Interesting%20JDBC%20Connection%20Pool&hashtags=HikariCP&url=https%3A%2F%2Fgithub.com%2Fbrettwooldridge%2FHikariCP)&nbsp;[![](https://raw.github.com/wiki/brettwooldridge/HikariCP/facebook.png)](http://www.facebook.com/plugins/like.php?href=https%3A%2F%2Fgithub.com%2Fbrettwooldridge%2FHikariCP&width&layout=standard&action=recommend&show_faces=true&share=false&height=80)
------------------------------
### :gear: Configuration (knobs, baby!)
HikariCP comes with *sane* defaults that perform well in most deployments without additional tweaking. **Every property is optional, except for the "essentials" marked below.**

&#128206;&nbsp;*HikariCP uses milliseconds for all time values.*

&#128680;&nbsp;HikariCP relies on accurate timers for both performance and reliability. It is *imperative* that your server is synchronized with a time-source such as an NTP server. *Especially* if your server is running within a virtual machine.  Why? [Read more here](https://dba.stackexchange.com/a/171020). **Do not rely on hypervisor settings to "synchronize" the clock of the virtual machine. Configure time-source synchronization inside the virtual machine.**   If you come asking for support on an issue that turns out to be caused by lack time synchronization, you will be taunted publicly on Twitter.

#### Essentials

&#128292;``dataSourceClassName`` 
This is the name of the ``DataSource`` class provided by the JDBC driver. Consult the
documentation for your specific JDBC driver to get this class name, or see the [table](https://github.com/brettwooldridge/HikariCP#popular-datasource-class-names) below.
Note XA data sources are not supported. XA requires a real transaction manager like
[bitronix](https://github.com/bitronix/btm). Note that you do not need this property if you are using
``jdbcUrl`` for "old-school" DriverManager-based JDBC driver configuration.
*Default: none*

*- or -*

&#128292;``jdbcUrl`` 
This property directs HikariCP to use "DriverManager-based" configuration. We feel that DataSource-based
configuration (above) is superior for a variety of reasons (see below), but for many deployments there is
little significant difference. **When using this property with "old" drivers, you may also need to set
the ``driverClassName`` property, but try it first without.** Note that if this property is used, you may
still use *DataSource* properties to configure your driver and is in fact recommended over driver parameters
specified in the URL itself.
*Default: none*

***

&#128292;``username`` 
This property sets the default authentication username used when obtaining *Connections* from
the underlying driver. Note that for DataSources this works in a very deterministic fashion by
calling ``DataSource.getConnection(*username*, password)`` on the underlying DataSource. However,
for Driver-based configurations, every driver is different. In the case of Driver-based, HikariCP
will use this ``username`` property to set a ``user`` property in the ``Properties`` passed to the
driver's ``DriverManager.getConnection(jdbcUrl, props)`` call. If this is not what you need,
skip this method entirely and call ``addDataSourceProperty("username", ...)``, for example.
*Default: none*

&#128292;``password`` 
This property sets the default authentication password used when obtaining *Connections* from
the underlying driver. Note that for DataSources this works in a very deterministic fashion by
calling ``DataSource.getConnection(username, *password*)`` on the underlying DataSource. However,
for Driver-based configurations, every driver is different. In the case of Driver-based, HikariCP
will use this ``password`` property to set a ``password`` property in the ``Properties`` passed to the
driver's ``DriverManager.getConnection(jdbcUrl, props)`` call. If this is not what you need,
skip this method entirely and call ``addDataSourceProperty("pass", ...)``, for example.
*Default: none*

#### Frequently used

&#9989;``autoCommit`` 
This property controls the default auto-commit behavior of connections returned from the pool.
It is a boolean value.
*Default: true*

&#9203;``connectionTimeout`` 
This property controls the maximum number of milliseconds that a client (that's you) will wait
for a connection from the pool. If this time is exceeded without a connection becoming
available, a SQLException will be thrown. Lowest acceptable connection timeout is 250 ms.
*Default: 30000 (30 seconds)*

&#9203;``idleTimeout`` 
This property controls the maximum amount of time that a connection is allowed to sit idle in the
pool. **This setting only applies when ``minimumIdle`` is defined to be less than ``maximumPoolSize``.**
Idle connections will *not* be retired once the pool reaches ``minimumIdle`` connections. Whether a
connection is retired as idle or not is subject to a maximum variation of +30 seconds, and average
variation of +15 seconds. A connection will never be retired as idle *before* this timeout. A value
of 0 means that idle connections are never removed from the pool. The minimum allowed value is 10000ms
(10 seconds).
*Default: 600000 (10 minutes)*

&#9203;``keepaliveTime`` 
This property controls how frequently HikariCP will attempt to keep a connection alive, in order to prevent
it from being timed out by the database or network infrastructure. This value must be less than the
`maxLifetime` value. A "keepalive" will only occur on an idle connection. When the time arrives for a "keepalive"
against a given connection, that connection will be removed from the pool, "pinged", and then returned to the
pool. The 'ping' is one of either: invocation of the JDBC4 `isValid()` method, or execution of the
`connectionTestQuery`. Typically, the duration out-of-the-pool should be measured in single digit milliseconds
or even sub-millisecond, and therefore should have little or no noticeable performance impact. The minimum
allowed value is 30000ms (30 seconds), but a value in the range of minutes is most desirable.
*Default: 120000 (2 minutes)*

&#9203;``maxLifetime`` 
This property controls the maximum lifetime of a connection in the pool. An in-use connection will
never be retired, only when it is closed will it then be removed. On a connection-by-connection
basis, minor negative attenuation is applied to avoid mass-extinction in the pool. **We strongly recommend
setting this value, and it should be several seconds shorter than any database or infrastructure imposed
connection time limit.** A value of 0 indicates no maximum lifetime (infinite lifetime), subject of
course to the ``idleTimeout`` setting. The minimum allowed value is 30000ms (30 seconds).
*Default: 1800000 (30 minutes)*

&#128292;``connectionTestQuery`` 
**If your driver supports JDBC4 we strongly recommend not setting this property.** This is for
"legacy" drivers that do not support the JDBC4 ``Connection.isValid() API``. This is the query that
will be executed just before a connection is given to you from the pool to validate that the
connection to the database is still alive. *Again, try running the pool without this property,
HikariCP will log an error if your driver is not JDBC4 compliant to let you know.*
*Default: none*

&#128290;``minimumIdle`` 
This property controls the minimum number of *idle connections* that HikariCP tries to maintain
in the pool. If the idle connections dip below this value and total connections in the pool are less than ``maximumPoolSize``,
HikariCP will make a best effort to add additional connections quickly and efficiently.
However, for maximum performance and responsiveness to spike demands,
we recommend *not* setting this value and instead allowing HikariCP to act as a *fixed size* connection pool.
*Default: same as maximumPoolSize*

&#128290;``maximumPoolSize`` 
This property controls the maximum size that the pool is allowed to reach, including both
idle and in-use connections. Basically this value will determine the maximum number of
actual connections to the database backend. A reasonable value for this is best determined
by your execution environment. When the pool reaches this size, and no idle connections are
available, calls to getConnection() will block for up to ``connectionTimeout`` milliseconds
before timing out. Please read [about pool sizing](https://github.com/brettwooldridge/HikariCP/wiki/About-Pool-Sizing).
*Default: 10*

&#128200;``metricRegistry`` 
This property is only available via programmatic configuration or IoC container. This property
allows you to specify an instance of a *Codahale/Dropwizard* ``MetricRegistry`` to be used by the
pool to record various metrics. See the [Metrics](https://github.com/brettwooldridge/HikariCP/wiki/Dropwizard-Metrics)
wiki page for details.
*Default: none*

&#128200;``healthCheckRegistry`` 
This property is only available via programmatic configuration or IoC container. This property
allows you to specify an instance of a *Codahale/Dropwizard* ``HealthCheckRegistry`` to be used by the
pool to report current health information. See the [Health Checks](https://github.com/brettwooldridge/HikariCP/wiki/Dropwizard-HealthChecks)
wiki page for details.
*Default: none*

&#128292;``poolName`` 
This property represents a user-defined name for the connection pool and appears mainly
in logging and JMX management consoles to identify pools and pool configurations.
*Default: auto-generated*

#### Infrequently used

&#9203;``initializationFailTimeout`` 
This property controls whether the pool will "fail fast" if the pool cannot be seeded with
an initial connection successfully. Any positive number is taken to be the number of
milliseconds to attempt to acquire an initial connection; the application thread will be
blocked during this period. If a connection cannot be acquired before this timeout occurs,
an exception will be thrown. This timeout is applied *after* the ``connectionTimeout``
period. If the value is zero (0), HikariCP will attempt to obtain and validate a connection.
If a connection is obtained, but fails validation, an exception will be thrown and the pool
not started. However, if a connection cannot be obtained, the pool will start, but later
efforts to obtain a connection may fail. A value less than zero will bypass any initial
connection attempt, and the pool will start immediately while trying to obtain connections
in the background. Consequently, later efforts to obtain a connection may fail.
*Default: 1*

&#10062;``isolateInternalQueries`` 
This property determines whether HikariCP isolates internal pool queries, such as the
connection alive test, in their own transaction. Since these are typically read-only
queries, it is rarely necessary to encapsulate them in their own transaction. This
property only applies if ``autoCommit`` is disabled.
*Default: false*

&#10062;``allowPoolSuspension`` 
This property controls whether the pool can be suspended and resumed through JMX. This is
useful for certain failover automation scenarios. When the pool is suspended, calls to
``getConnection()`` will *not* timeout and will be held until the pool is resumed.
*Default: false*

&#10062;``readOnly`` 
This property controls whether *Connections* obtained from the pool are in read-only mode by
default. Note some databases do not support the concept of read-only mode, while others provide
query optimizations when the *Connection* is set to read-only. Whether you need this property
or not will depend largely on your application and database.
*Default: false*

&#10062;``registerMbeans`` 
This property controls whether or not JMX Management Beans ("MBeans") are registered or not.
*Default: false*

&#128292;``catalog`` 
This property sets the default *catalog* for databases that support the concept of catalogs.
If this property is not specified, the default catalog defined by the JDBC driver is used.
*Default: driver default*

&#128292;``connectionInitSql`` 
This property sets a SQL statement that will be executed after every new connection creation
before adding it to the pool. If this SQL is not valid or throws an exception, it will be
treated as a connection failure and the standard retry logic will be followed.
*Default: none*

&#128292;``driverClassName`` 
HikariCP will attempt to resolve a driver through the DriverManager based solely on the ``jdbcUrl``,
but for some older drivers the ``driverClassName`` must also be specified. Omit this property unless
you get an obvious error message indicating that the driver was not found.
*Default: none*

&#128292;``transactionIsolation`` 
This property controls the default transaction isolation level of connections returned from
the pool. If this property is not specified, the default transaction isolation level defined
by the JDBC driver is used. Only use this property if you have specific isolation requirements that are
common for all queries. The value of this property is the constant name from the ``Connection``
class such as ``TRANSACTION_READ_COMMITTED``, ``TRANSACTION_REPEATABLE_READ``, etc.
*Default: driver default*

&#9203;``validationTimeout`` 
This property controls the maximum amount of time that a connection will be tested for aliveness.
This value must be less than the ``connectionTimeout``. Lowest acceptable validation timeout is 250 ms.
*Default: 5000*

&#9203;``leakDetectionThreshold`` 
This property controls the amount of time that a connection can be out of the pool before a
message is logged indicating a possible connection leak. A value of 0 means leak detection
is disabled. Lowest acceptable value for enabling leak detection is 2000 (2 seconds).
*Default: 0*

&#10145;``dataSource`` 
This property is only available via programmatic configuration or IoC container. This property
allows you to directly set the instance of the ``DataSource`` to be wrapped by the pool, rather than
having HikariCP construct it via reflection. This can be useful in some dependency injection
frameworks. When this property is specified, the ``dataSourceClassName`` property and all
DataSource-specific properties will be ignored.
*Default: none*

&#128292;``schema`` 
This property sets the default *schema* for databases that support the concept of schemas.
If this property is not specified, the default schema defined by the JDBC driver is used.
*Default: driver default*

&#10145;``threadFactory`` 
This property is only available via programmatic configuration or IoC container. This property
allows you to set the instance of the ``java.util.concurrent.ThreadFactory`` that will be used
for creating all threads used by the pool. It is needed in some restricted execution environments
where threads can only be created through a ``ThreadFactory`` provided by the application container.
*Default: none*

&#10145;``scheduledExecutor`` 
This property is only available via programmatic configuration or IoC container. This property
allows you to set the instance of the ``java.util.concurrent.ScheduledExecutorService`` that will
be used for various internally scheduled tasks. If supplying HikariCP with a ``ScheduledThreadPoolExecutor``
instance, it is recommended that ``setRemoveOnCancelPolicy(true)`` is used.
*Default: none*

&#10145;``exceptionOverride`` 
This property is only available via programmatic configuration or IoC container. This property
allows you to set an instance of a class, implementing the ``com.zaxxer.hikari.SQLExceptionOverride``
interface, that will be called before a connection is evicted from the pool due to specific exception
conditions. Typically, when a ``SQLException`` is thrown, connections are evicted from the pool when
specific *SQLStates* or *ErrorCodes* are present. The ``adjudicate()`` method will be called on the
``SQLExceptionOverride`` instance, which may return one of: ``Override.CONTINUE_EVICT``.
``Override.DO_NOT_EVICT`` or ``Override.MUST_EVICT``. Except in very specific cases
``Override.CONTINUE_EVICT`` should be returned, allowing the default evict/no-evict logic to execute.
*Default: none*

&#128292;``exceptionOverrideClassName`` 
This property allows you to specify the name of a user-supplied class implementing the
``com.zaxxer.hikari.SQLExceptionOverride`` interface. An instance of the class will be instantiated
by the pool to adjudicate connection evictions. See the above property ``exceptionOverride`` for a
full description.
*Default: none*

----------------------------------------------------

#### Missing Knobs

HikariCP has plenty of "knobs" to turn as you can see above, but comparatively less than some other pools.
This is a design philosophy.  The HikariCP design aesthetic is Minimalism.  In keeping with the
*simple is better* or *less is more* design philosophy, some configuration axis are intentionally left out.

#### Statement Cache

Many connection pools, including Apache DBCP, Vibur, c3p0 and others offer ``PreparedStatement`` caching.
HikariCP does not.  Why?

At the connection pool layer ``PreparedStatements`` can only be cached *per connection*.  If your application
has 250 commonly executed queries and a pool of 20 connections you are asking your database to hold on to
5000 query execution plans -- and similarly the pool must cache this many ``PreparedStatements`` and their
related graph of objects.

Most major database JDBC drivers already have a Statement cache that can be configured, including PostgreSQL,
Oracle, Derby, MySQL, DB2, and many others.  JDBC drivers are in a unique position to exploit database specific
features, and nearly all of the caching implementations are capable of sharing execution plans *across connections*.
This means that instead of 5000 statements in memory and associated execution plans, your 250 commonly executed
queries result in exactly 250 execution plans in the database.  Clever implementations do not even retain
``PreparedStatement`` objects in memory at the driver-level but instead merely attach new instances to existing plan IDs.

Using a statement cache at the pooling layer is an [anti-pattern](https://en.wikipedia.org/wiki/Anti-pattern),
and will negatively impact your application performance compared to driver-provided caches.

#### Log Statement Text / Slow Query Logging

Like Statement caching, most major database vendors support statement logging through
properties of their own driver.  This includes Oracle, MySQL, Derby, MSSQL, and others.  Some
even support slow query logging.  For those few databases that do not support it, several options are available.
We have received [a report that p6spy works well](https://github.com/brettwooldridge/HikariCP/issues/57#issuecomment-354647631),
and also note the availability of [log4jdbc](https://github.com/arthurblake/log4jdbc) and [jdbcdslog-exp](https://code.google.com/p/jdbcdslog-exp/).

#### Rapid Recovery
Please read the [Rapid Recovery Guide](https://github.com/brettwooldridge/HikariCP/wiki/Rapid-Recovery) for details on how to configure your driver and system for proper recovery from database restart and network partition events.

----------------------------------------------------

### :see_no_evil: Secret Properties

HikariCP has several Java system properties that control various aspects of the pool. These properties are *unsupported*
for user manipulation. It is possible though unlikely that they may not exist in the future. This means: do not open an issue of any kind if you have modified these properties. *Pretend you never heard anything about "secret properties".*

| Property                                      | Description                                                                                                                                                                                                                                       |
|:----------------------------------------------|:--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| ``com.zaxxer.hikari.blockUntilFilled``        | When this property is set ``true`` *and* ``initializationFailTimeout`` is greater than 1, the pool will block during start until completely filled.                                                                                               |
| ``com.zaxxer.hikari.enableRequestBoundaries`` | When this property is set ``true``, HikariCP will bracket connection acquisition and return with calls to ``Connection.beginRequest()`` and ``Connection.endRequest()``.                                                                          |
| ``com.zaxxer.hikari.housekeeping.period``     | This property controls the frequency of the housekeeping thread, represented in milliseconds. Really, don't mess with this.                                                                                                                       |
| ``com.zaxxer.hikari.legacy.supportUserPassDataSourceOverride`` | When this property is set ``true``, HikariCP will support the legacy behavior of overriding the ``getUsername()/getPassword()`` methods on *HikariDataSource*. Preferred method is overriding ``getCredentials()``.             |
| ``com.zaxxer.hikari.useWeakReferences``       | When this property is set ``true`` it will force HikariCP to use ``WeakReference`` objects in the ``ConcurrentBag`` internal collection ThreadLocals and prevent the use of our ``FastList`` class, all to avoid TomCat warnings during redeploy. |

Either don't use these properties or take on full responsibility for the consequences.

### :rocket: Initialization

You can use the ``HikariConfig`` class like so1:
```java
HikariConfig config = new HikariConfig();
config.setJdbcUrl("jdbc:mysql://localhost:3306/simpsons");
config.setUsername("bart");
config.setPassword("51mp50n");
config.addDataSourceProperty("cachePrepStmts", "true");
config.addDataSourceProperty("prepStmtCacheSize", "250");
config.addDataSourceProperty("prepStmtCacheSqlLimit", "2048");

HikariDataSource ds = new HikariDataSource(config);
```
&nbsp;1 MySQL-specific example, DO NOT COPY VERBATIM.

or directly instantiate a ``HikariDataSource`` like so:
```java
HikariDataSource ds = new HikariDataSource();
ds.setJdbcUrl("jdbc:mysql://localhost:3306/simpsons");
ds.setUsername("bart");
ds.setPassword("51mp50n");
...
```
or property file based:
```java
// Examines both filesystem and classpath for .properties file
HikariConfig config = new HikariConfig("/some/path/hikari.properties");
HikariDataSource ds = new HikariDataSource(config);
```
Example property file:
```ini
dataSourceClassName=org.postgresql.ds.PGSimpleDataSource
dataSource.user=test
dataSource.password=test
dataSource.databaseName=mydb
dataSource.portNumber=5432
dataSource.serverName=localhost
```
or ``java.util.Properties`` based:
```java
Properties props = new Properties();
props.setProperty("dataSourceClassName", "org.postgresql.ds.PGSimpleDataSource");
props.setProperty("dataSource.user", "test");
props.setProperty("dataSource.password", "test");
props.setProperty("dataSource.databaseName", "mydb");
props.put("dataSource.logWriter", new PrintWriter(System.out));

HikariConfig config = new HikariConfig(props);
HikariDataSource ds = new HikariDataSource(config);
```

There is also a System property available, ``hikaricp.configurationFile``, that can be used to specify the
location of a properties file.  If you intend to use this option, construct a ``HikariConfig`` or ``HikariDataSource``
instance using the default constructor and the properties file will be loaded.

### Performance Tips
[MySQL Performance Tips](https://github.com/brettwooldridge/HikariCP/wiki/MySQL-Configuration)

### Popular DataSource Class Names

We recommended using ``dataSourceClassName`` instead of ``jdbcUrl``, but either is acceptable.  We'll say that again, *either is acceptable*.

&#9888;&nbsp;*Note: Spring Boot auto-configuration users, you need to use ``jdbcUrl``-based configuration.*

&#9888;&nbsp;The MySQL DataSource is known to be broken with respect to network timeout support. Use ``jdbcUrl`` configuration instead.

Here is a list of JDBC *DataSource* classes for popular databases:

| Database         | Driver       | *DataSource* class |
|:---------------- |:------------ |:-------------------|
| Apache Derby     | Derby        | org.apache.derby.jdbc.ClientDataSource |
| Firebird         | Jaybird      | org.firebirdsql.ds.FBSimpleDataSource |
| Google Spanner   | Spanner      | com.google.cloud.spanner.jdbc.JdbcDriver |
| H2               | H2           | org.h2.jdbcx.JdbcDataSource |
| HSQLDB           | HSQLDB       | org.hsqldb.jdbc.JDBCDataSource |
| IBM DB2          | IBM JCC      | com.ibm.db2.jcc.DB2SimpleDataSource |
| IBM Informix     | IBM Informix | com.informix.jdbcx.IfxDataSource |
| MS SQL Server    | Microsoft    | com.microsoft.sqlserver.jdbc.SQLServerDataSource |
| ~~MySQL~~        | Connector/J  | ~~com.mysql.jdbc.jdbc2.optional.MysqlDataSource~~ |
| MariaDB          | MariaDB      | org.mariadb.jdbc.MariaDbDataSource |
| Oracle           | Oracle       | oracle.jdbc.pool.OracleDataSource |
| OrientDB         | OrientDB     | com.orientechnologies.orient.jdbc.OrientDataSource |
| PostgreSQL       | pgjdbc-ng    | com.impossibl.postgres.jdbc.PGDataSource |
| PostgreSQL       | PostgreSQL   | org.postgresql.ds.PGSimpleDataSource |
| SAP MaxDB        | SAP          | com.sap.dbtech.jdbc.DriverSapDB |
| SQLite           | xerial       | org.sqlite.SQLiteDataSource |
| SyBase           | jConnect     | com.sybase.jdbc4.jdbc.SybDataSource |

### Play Framework Plugin

Note Play 2.4 now uses HikariCP by default.  A new plugin has come up for the the Play framework; [play-hikaricp](http://edulify.github.io/play-hikaricp.edulify.com/).  If you're using the excellent Play framework,  your application deserves HikariCP.  Thanks Edulify Team!

### Clojure Wrapper

A new Clojure wrapper has been created by [tomekw](https://github.com/tomekw) and can be [found here](https://github.com/tomekw/hikari-cp).

### JRuby Wrapper

A new JRuby wrapper has been created by [tomekw](https://github.com/tomekw) and can be [found here](https://github.com/tomekw/hucpa).

----------------------------------------------------

### Wiki

Don't forget the [Wiki](https://github.com/brettwooldridge/HikariCP/wiki) for additional information such as:
 * [FAQ](https://github.com/brettwooldridge/HikariCP/wiki/FAQ)
 * [Hibernate 4.x Configuration](https://github.com/brettwooldridge/HikariCP/wiki/Hibernate4)
 * [MySQL Configuration Tips](https://github.com/brettwooldridge/HikariCP/wiki/MySQL-Configuration)
 * etc.

----------------------------------------------------

### Requirements

&#8658; Java 11+ (Java 6/7/8 artifacts are in maintenance mode) 
 &#8658; slf4j library

### Sponsors
High-performance projects can never have too many tools!  We would like to thank the following companies:

Thanks to [ej-technologies](https://www.ej-technologies.com) for their excellent all-in-one profiler, [JProfiler](https://www.ej-technologies.com/products/jprofiler/overview.html).

YourKit supports open source projects with its full-featured Java Profiler. Click the YourKit logo below to learn more. 
[![](https://github.com/brettwooldridge/HikariCP/wiki/yklogo.png)](http://www.yourkit.com/java/profiler/index.jsp)

### Contributions

Please perform changes and submit pull requests from the ``dev`` branch instead of ``master``.  Please set your editor to use spaces instead of tabs, and adhere to the apparent style of the code you are editing.  The ``dev`` branch is always more "current" than the ``master`` if you are looking to live life on the edge.

[Build Status]:https://circleci.com/gh/brettwooldridge/HikariCP
[Build Status img]:https://circleci.com/gh/brettwooldridge/HikariCP/tree/dev.svg?style=shield

[Coverage Status]:https://codecov.io/gh/brettwooldridge/HikariCP
[Coverage Status img]:https://codecov.io/gh/brettwooldridge/HikariCP/branch/dev/graph/badge.svg

[license]:LICENSE
[license img]:https://img.shields.io/badge/license-Apache%202-blue.svg

[Javadocs]:http://javadoc.io/doc/com.zaxxer/HikariCP
[Javadocs img]:http://javadoc.io/badge/com.zaxxer/HikariCP.svg

[Librapay]:https://liberapay.com/brettwooldridge
[Librapay img]:https://img.shields.io/liberapay/patrons/brettwooldridge.svg?logo=liberapay

HikariCP

파일 탐색기

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

HikariCP

파일 탐색기

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README