KO
|
EN
gitlite — search
Search
#flutter
#dart
#css
#html
#python
#android
#javascript
#tutorial
#cryptography
#discord
#game-development
#raspberry-pi
BeeSchema
★ 51
Open GitHub ↗
Binary Schema Library for C#
Download README (.md)
Explore Similar Repositories
RSA
:
PHP RSA 公钥私钥不对称加密
Ananas
:
This is an Arduino based program for step motor controller,Ananas.
PullSwitcher
:
Help to switch fragment easier
RFM69OOK
:
A general OOK transceiver library for RFM69
Source-Insight-config
:
My own Source Insight config
// repository documentation
Was this content helpful?
★ 0
(0 ratings)
Select Rating:
★
★
★
★
★
Submit Feedback
Recent Feedback
×
Download README
Do you want to download the
README.md
file for
BeeSchema
?
Download (.md)
 # BeeSchema ## Binary Schema Library for C# BeeSchema allows you to define the structure of a binary file using a simple schema (*.bee) file, then read the file in a much more human way. No more BinaryReader or manually reading data from Streams. *NOTE: BeeSchema is still in development, so things may change and other things might not be too optimised. Also, BeeSchema was designed as a replacement for the limited structure definition support in [Ostara](https://github.com/Epidal/Ostara). As such, some features that you require may not be supported.* ## Schema Files The structure of a binary file to be parsed by BeeSchema is defined in a simple text file (usually with the extension *.bee) that uses a custom language designed specifically for this purpose. These schemas can then be loaded by BeeSchema, and later used to parse binary files and turn them into more human-readable data. The basic structure of any schema file consists of optional custom data types and a **schema** block that represents the entry point of the schema file. This block is where BeeSchema will begin its parsing of binary files. For example, a schema file for a simple binary file that consists of a 32-bit integer followed by an 8-bit integer might look like this: ```elm schema { first_var : Int; next_var : Byte; } ``` ### Primitive Data Types BeeSchema supports a number of primitive data types. The following table lists these types, along with a short description and their size in bytes. *NOTE: Primitive type names are case-insensitive, so `an_int : int` is exactly the same as `an_int : Int`* Type | Size (bytes) | Description --- | --- | --- bool | 1 | A boolean value (true or false) byte | 1 | An unsigned 8-bit integer sbyte | 1 | A signed 8-bit integer ushort | 2 | An unsigned 16-bit integer short | 2 | A signed 16-bit integer uint | 4 | An unsigned 32-bit integer int | 4 | A signed 32-bit integer ulong | 8 | An unsigned 64-bit integer long | 8 | A signed 64-bit integer float | 4 | A 32-bit floating point integer double | 8 | A 64-bit floating point integer ipaddress | 4 | A 32-bit representation of an IP address, where each byte represents a portion of the address (eg. 0x04030201 = 1.2.3.4) epoch | 4 | A 32-bit value representing a date and time in Unix format (seconds since 01/01/1970) Arrays are also supported. They can be declared like so: ```elm a_byte_array : Byte[7]; ``` You can use a previously-declared variable for the array length: ```elm some_int : Int; another_array : Float[some_int]; ``` and even perform arithmetic operations in the length specifier: ```elm some_other_int : Int; oh_look_another_array : Char[some_other_int / 4]; ``` *NOTE: Referencing variables inside a custom type is not currently supported, but is planned for the future. Absolute and relative pointers may also be added.* ### Custom Data Types BeeSchema also supports custom data types in the form of structures, enumerations and bitfields. #### Structures Structures can be used to define the structure of a block of data. They are useful for when your data file contains several blocks of data that share the same format. Structures are defined with the **struct** keyword, and can contain any type and number of other variables, including other previously defined structures, enumerations or bitfields: ```elm struct MyStruct { my_int : Int; } ``` Once defined, structures can be used like any other type: ```elm my_struct : MyStruct; ``` When parsing structures, BeeSchema will return a collection of results, with each one representing a separate variable inside the struct (the same applies to bitfields and arrays). #### Enumerations Enumerations can be used for variables that have a fixed number of values that you might want to associate names with. By default, values in an enumeration start at zero and increment by 1, but they can also be manually assigned. Enumerations are defined with the **enum** keyword and must always declare a base type so that BeeSchema knows the size of the data to read: ```elm enum MyEnum : Int { AValueThatIsZero, ThisValueIsOne, ThisIsTwo, ButThisIsSeven = 7 AndNowThisIsEight } ``` #### Bitfields Bitfields are used to represent data that packs several values together. They are defined with the **bitfield** keyword and, like enumerations, must declare a base type. Additionally, each variable inside a bitfield must specify its size in bits: ```elm bitfield MyBitfield : Byte { first_bit : 1; second_to_fourth_bits : 3; remaining_bits : 4; } ``` ### Conditionals and Loops BeeSchema has basic support for conditionals and loops, including **if**, **unless**, **while**, and **until**. Conditions for these can consist of references to previously-defined variables, macros, and comparison operators (!, ==, !=, <, >, <=, and >=). Conditions can be chained together using OR (||) or AND (&&): ```elm if (some_value > 5 && another_value <= 42) { an_int : Int; a_short : Short; } ``` The following table lists the currently supported conditionals and loops and a brief description of their purpose. Keyword | Description --- | --- if | If the condition is met, any variables in the associated block will be evaluated unless | Like **if**, but only evaluates the associated block if the condition is **not** met while | Evaluates the variables in the associated block while the condition is true until | Evaluates the variables in the associated block while the condition is false ### Macros BeeSchema supports a few macros that provide information about the current binary file being parsed. They can be used as conditions and in array length specifiers. Macros are prepended with the **@** character and evaluated by BeeSchema while binary data is being parsed. The following table lists the currently supported macros and what they represent. Macro | Description --- | --- @eof | Evaluates to **true** if the end of the binary data has been reached @size | Evaluates to the size of the binary data @pos | Evaluates to the current position of the parser in the binary data ### Comments Schema files support both single-line and block (multi-line) comments. When BeeSchema discovers a comment, it will attach it to the most recently-declared variable. This is useful for including annotations that you would like to display in your program along with the data. #### Single-Line Comments Single-line comments are declared by the **#** character, followed by the comment itself: ```elm a_string : String; # This is a comment! ``` #### Block (Multi-Line) Comments Multi-Line comments (otherwise known as "block comments") are declared by wrapping the comment text in double-hashes (ie. two **#** characters): ``` ## This is a multiline comment. ## ``` ### Including Schema Files BeeSchema allows you to include other schema files inside your schema file. This will import all of the defined custom data types, but will ignore the **schema** block inside that file: ```elm include some_schema_file.bee; ``` This can be useful when several data formats share common types as it prevents you from having to repeat code and helps reduce the size of schema files. ### Example Schema File Here's an example schema file that demonstrates all of the current features of BeeSchema: ```elm # We can include external files so that we can use types defined in them include somefile.bee; # This is a single-line comment ## This is a multi-line comment. ## struct SomeStruct { a_bool : bool; a_byte : byte; an_sbyte : sbyte; a_ushort : ushort; a_short : short; an_int : int; a_uint : uint; a_long : long; a_ulong : ulong a_float : float; a_double : double; a_string : string; an_ip : ipaddress; a_timestamp : epoch } # Enum and bitfield definitions require a base type enum SomeEnum : byte { SomeValue1, SomeValue2, AnotherValue = 10, YetAnotherValue } bitfield SomeBitfield : byte { first_bit : 1; next_3_bits : 3; last_4_bits : 4; } schema { a_struct : SomeStruct; # Variables can be annotated by using a comment an_enum : SomeEnum; a_bitfield : SomeBitfield; length : Int; an_array : Char[length]; an_array2 : Int[4 * 2]; an_array3 : Byte[@size - @pos - 32]; int_1, int_2, int_3 : Int; # Multiple variables of the same type can be declared by separating them with a comma until(@eof) { some_var : Float; another_var : Epoch; } } ``` ## Using BeeSchema To use BeeSchema, create an instance of the **Schema** class using the static **FromFile()** or **FromText()** methods. You can then parse a binary file by passing the filename, a byte array, or a Stream object to the instance's **Parse()** method. Please see [the Example project](Example/Program.cs) for a simple example on how to use BeeSchema and the resulting parsed data.
