switchtec-user

KO | EN

gitlite — search

#python #hacktoberfest #llm #android #linux #nodejs #macos #java #windows #awesome #cli #kubernetes #ios #mcp

(★ 72)

Userspace code for the Microsemi PCIe switch

switchtec-user 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Switchtec Management CLI and Library

## Summary

The code hosted here provides an easy to use CLI and C library for
communicating with Microsemi's Switchtec management interface. It
utilizes the switchtec kernel module which, with luck, will be upstream
for 4.11. Otherwise it can be obtained from the [switchtec-kernel]
github repository and compiled for other supported kernels.

Currently the following features are supported:

* Show status for each port on all partitions
* Measure bandwidth and latency for each port
* Display and wait on event occurrances
* Setup and show event counters for various types of events
* Dump firmware logs
* Send a hard reset command to the switch
* Update and readback firmware as well as display image version and CRC info
* A simple ncurses GUI that shows salient information for the switch
* Display and configure manufacturing settings

Detailed documentation for the project can be found on the [Github
Pages] site.

[switchtec-kernel]: https://github.com/Microsemi/switchtec-kernel
[github pages]: https://microsemi.github.io/switchtec-user/

## Dependencies

This program has an optional build dependencies on the following libraries:

* libncurses5-dev (without it, 'switchtec gui' will not work)
* libssl-dev (without it, some of the commands in 'switchtec mfg' will not work)

## Installation

Installation is simple, with:

~~~
./configure
make
sudo make install
~~~~

## Building on Windows

MSYS2 should be used to build switchtec-user on windows seeing it
provides a reasonably compatible compiler. (Visual C++ still is
missing full support of C99.) To setup an environment:

1. Install MSYS2 by following the instructions at: http://www.msys2.org/
2. In an MSYS2 shell, run the following:

~~~
pacman -S --needed base-devel mingw-w64-i686-toolchain mingw-w64-x86_64-toolchain git
~~~

3. Close the MSYS2 shell, open an MINGW64 shell, checkout the project
and follow the above installation instructions as usual.

## Demos

### CLI Demo
[![asciicast](https://asciinema.org/a/98042.png)](https://asciinema.org/a/98042)

### Firmware Demo
[![asciicast](https://asciinema.org/a/96442.png)](https://asciinema.org/a/96442)

switchtec-user

switchtec-user 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

switchtec-user

switchtec-user 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README