mpv-anilist-updater

KO | EN

gitlite — search

#javascript #python #llm #android #machine-learning #deep-learning #docker #nodejs #windows #cli #kubernetes #awesome-list #pytorch #openai

mpv-anilist-updater

(★ 39)

MPV Script for AniList, Automatically updates your anilist with anime that you watch.

mpv-anilist-updater Latest Version Download

Download Latest Version (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# mpv-anilist-updater

A script for MPV that automatically updates your AniList based on the file you just watched.

> [!IMPORTANT]
> By default, the anime must be set to "watching", "planning" or "rewatching" to update progress. This is done in order to prevent updating the wrong show. 
> **Recommendation:** Check out the configuration options in your `anilistUpdater.conf` file to customize the script to your needs. See the [Configuration](#configuration-anilistupdaterconf) section for details.

> [!TIP]
> In order for the script to work properly, make sure your files are named correctly: 
>
> - Either the file or folder its in must have the anime title in it 
> - The file must have the episode number in it (absolute numbering should work) 
> - In case of remakes, specify the year of the remake to ensure it updates the proper one 
>
> To avoid the script running and making useless API calls, you can set one or more directories in the config file. See the [Configuration](#configuration-anilistupdaterconf) section below.

For any issues, you can either open an issue on here, or message me on discord (azuredblue)

## Requirements

You will need Python 3 installed, as well as the libraries `guessit` and `requests`:

```bash
pip install guessit requests
```

## Installation

Simply git clone this repository into your mpv scripts folder, or download this repository and extract the contents into your mpv scripts folder.

If you use git clone, you can update by using `git pull` in the repository folder.

You **WILL** need an AniList access token for it to work:

1. Visit `https://anilist.co/api/v2/oauth/authorize?client_id=20740&response_type=token`
2. Authorize the app
3. Copy the token
4. Create an `anilistToken.txt` file in the `mpv-anilist-updater` folder (if not already there) and paste the token there.

This token is what allows the script to update the anime episode count and make api requests, it is not used for anything else.

## Configuration (`anilistUpdater.conf`)

> [!IMPORTANT]
> The config file is only generated after you run mpv at least once with the script installed. If the file is not created due to lack of write permissions, you can either run mpv as administrator once to generate it, or create the file manually in the appropriate directory. It is recommended to be in the `script-opts` directory.

When you first run the script, it will automatically create a configuration file called `anilistUpdater.conf` if it does not already exist. This file is typically created in your mpv `script-opts` directory where you have mpv installed. If it cannot be created there, it will try the `scripts` directory or your mpv config directory (e.g. `~/.config/mpv/` on Linux, `%APPDATA%/mpv/` on Windows).

**Config file search order:**

The script checks for the config file in the following order:

1. `script-opts` directory (recommended)
2. `scripts` directory (where the script itself is located)
3. mpv config directory (e.g. `~/.config/mpv/` or `%APPDATA%/mpv/`)

If the config file exists in more than one location, the one in the highest-priority directory (script-opts) will be used. For example, if you have a config in both `script-opts` and `scripts`, the one in `script-opts` will take precedence.

**You should edit this file to change any options.**

### Example `anilistUpdater.conf`

```ini
# Use 'yes' or 'no' for boolean options below
# Example for multiple directories (comma or semicolon separated):
# DIRECTORIES=D:/Torrents,D:/Anime
# or
# DIRECTORIES=D:/Torrents;D:/Anime
DIRECTORIES=
EXCLUDED_DIRECTORIES=
UPDATE_PERCENTAGE=85
SET_COMPLETED_TO_REWATCHING_ON_FIRST_EPISODE=no
UPDATE_PROGRESS_WHEN_REWATCHING=yes
SET_TO_COMPLETED_AFTER_LAST_EPISODE_CURRENT=yes
SET_TO_COMPLETED_AFTER_LAST_EPISODE_REWATCHING=yes
ADD_ENTRY_IF_MISSING=no
CACHE_REFRESH_RATE=24
CACHE_MODE=NORMAL
SILENT_MODE=no
```

#### Option Descriptions

- **DIRECTORIES**: Comma or semicolon separated list of directories. If empty, the script works for every video. Example: `DIRECTORIES=D:/Torrents,D:/Anime`
  - Restricting directories only prevents the script from automatically updating AniList for files outside the specified directories. Manual actions using the keybinds (Ctrl+A, Ctrl+B, Ctrl+D, C) will still work for any file, regardless of its location.
- **EXCLUDED_DIRECTORIES**: Comma or semicolon separated list of directories. Useful for ignoring paths inside directories from above. Example: EXCLUDED_DIRECTORIES = {"D:/Torrents/Watched", "D:/Anime/Planned"}
- **UPDATE_PERCENTAGE**: Number (0-100). The percentage of the video you need to watch before it updates AniList automatically. Default is `85`.
- **CACHE_REFRESH_RATE**: Number (hours). Controls how long normal cache entries remain valid. Default is `24`. Higher values are recommended if you do not plan on modifying your watching list through AniList, but it might cause your cache to go stale.
- **CACHE_MODE**: `NORMAL`/`SLIDING`. Default is `NORMAL`.
  - `NORMAL`: Cache entries expire after CACHE_REFRESH_RATE except for those corrected..
  - `SLIDING`: applies sliding expiration to all cache entries when they are read. Recommended with higher CACHE_REFRESH_RATE (more than a week for seasonals) values.
- **SET_COMPLETED_TO_REWATCHING_ON_FIRST_EPISODE**: `yes`/`no`. If `yes`, when watching episode 1 of a completed anime, set it to rewatching and update progress. Default is `no`.
- **UPDATE_PROGRESS_WHEN_REWATCHING**: `yes`/`no`. If `yes`, allow updating progress for anime set to rewatching. Default is `yes`.
- **SET_TO_COMPLETED_AFTER_LAST_EPISODE_CURRENT**: `yes`/`no`. If `yes`, set to COMPLETED after last episode if status was CURRENT. **Default is `yes`.**
- **SET_TO_COMPLETED_AFTER_LAST_EPISODE_REWATCHING**: `yes`/`no`. If `yes`, set to COMPLETED after last episode if status was REPEATING (rewatching). Default is `yes`.
- **ADD_ENTRY_IF_MISSING**: `yes`/`no`. If `yes`, automatically add anime to your list if it's not found in your list during search. Default is `no`. **⚠️ Warning: This can add incorrect anime to your list if the detection is inaccurate.**
- **SILENT_MODE**: `yes`/`no`. If `yes`, won't show OSD messages. Default is `no`.

> [!NOTE]
> All boolean options must be `yes` or `no` (not `true`/`false`).

## Usage

This script has 4 keybinds:

- **Ctrl + a**: Manually updates your AniList with the current episode you are watching.
- **Ctrl + b**: Opens the AniList page of the anime you are watching on your browser. Useful to see if it guessed the anime correctly.
- **Ctrl + d**: Opens the folder where the current video is playing. Useful if you have "your own" anime library, and navigating through folders is a pain.
- **c**: Opens a correction overlay for the current file. You can paste/type an AniList URL/ID and optionally override the mapped episode (relative progress). Use `Ctrl+v` to paste.

The script will automatically update your AniList when the video you are watching reaches 85% completion (or the percentage you set in the config file).

### Customizing Keybinds

You can change the keybinds in your `input.conf`:

```bash
A script-binding update_anilist
B script-binding launch_anilist
D script-binding open_folder
C script-binding correct_anime_id
```

## Correction

In the case the script gets it wrong, there is a menu pressing `c` where you can paste the anilist entry of the correct anime and the episode.

For example, if the file is "Attack On Titan - E48" you will need to paste the entry corresponding of that episode and the corresponding episode number for that season (Attack on Titan Third Season, Episode 11)

## How It Works

The script uses Guessit to try to get as much information as possible from the file name.

If the "episode" and "season" guess are before the title, it will consider that title wrong and try to get the title from the name of the folder it is in.

After that, it searches for the show both in your AniList and globally.

If the torrent file has absolute numbering (only episode number), it will try to guess the season and episode by:

1. From the first TV or ONA with duration > 21, attempt to build a list of sequels from the main series using relations from the API
2. If the episode number is greater than all of those combined, it could've made a mistake or maybe the user doesn't have all necessary entries in the list, so it repeats this process with the global search from before.
3. Once we have a filtered list of seasons in order, finding the episode is trivial.

If it doesn't work properly, consider manually changing the episode number to the normal format, or updating that series manually.

---

This script should work on most formats as long as the name is present in the file itself or the folder name:

`Boku no Hero Academia - 152 (1080p).mkv` will be detected as S7 E14 and updated accordingly.

`E12 - Welcome [F1119374].mkv` will work if the folder that it is in has `86` in the name. If it has `86 Part 2` then it should be `Episode 1`

To see which anime got detected, you can use `c`, `Ctrl+B` to launch the AniList page, or check mpv's console.

## MAL

For a MyAnimeList version, check out the fork [mpv-mal-updater](https://github.com/locomotiv1/mpv-mal-updater). Take into account this is a fork not maintained by me so I can't guarantee its safety. It may also be outdated or work differently.

## Credits

This script was inspired by [mpv-open-anilist-page](https://github.com/ehoneyse/mpv-open-anilist-page) by ehoneyse.

mpv-anilist-updater

mpv-anilist-updater Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

mpv-anilist-updater

mpv-anilist-updater Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

Download README