jellycheckr

KO | EN

gitlite — search

#ai #go #golang #android #deep-learning #linux #macos #nodejs #cli #vue #pytorch #ios #openai #open-source

(★ 38)

Jellyfin plugin that detects continuous playback and shows an "Are you still watching?" prompt. If there is no response, playback is paused automatically. Ideal for preventing overnight binge sessions or unattended playback.

jellycheckr 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Jellycheckr

Jellycheckr is an "Are You Still Watching?" plugin for Jellyfin. It is built for admins who want a more deliberate playback experience: less unattended autoplay, a clearer check-in point for long binge sessions, and a fallback path for clients that cannot render a web prompt.

- Shows an interactive "Are You Still Watching?" prompt in Jellyfin Web.
- Lets you trigger the check-in by episode count, a time threshold, or both.
- Stops playback automatically if the viewer ignores the countdown.
- Uses server-side fallback actions for native clients that cannot show the modal.
- Includes a built-in configuration page inside the Jellyfin dashboard.

## Screenshots
### Web Client Example

### Built-In Configuration UI

The plugin ships with its own dashboard configuration page, so you can tune prompt timing and native-client fallback behavior without editing files.

### Developer HUD (Testing Only)

If you enable developer mode, Jellycheckr can show a debug HUD to help validate timing, trigger decisions, and prompt flow during testing.

## Why It Exists

Jellyfin does not ship with a built-in Netflix-style autoplay check-in flow. Jellycheckr adds one without forcing a single behavior across every client type.

- Web playback can present a blocking prompt with a clear continue-or-stop choice.
- Native clients can still be handled through server-observed playback and pause/stop commands.
- Admins can tune the timing to match how aggressively or gently they want playback managed.

## How It Works

### Jellyfin Web

When Jellycheckr is active in Jellyfin Web, it can show a blocking prompt with a countdown when a configured threshold is reached.

- The viewer can choose to continue watching.
- The viewer can choose to stop playback.
- If the countdown expires, Jellycheckr stops playback automatically.

### Native And Non-Web Clients

Native clients do not render the Jellycheckr modal. When server-side fallback is enabled, Jellycheckr watches session activity from the server and uses Jellyfin pause/stop commands instead.

- It can optionally send a client message first.
- It can pause before stopping.
- It can wait through a grace period before sending stop.

### Trigger Behavior

Jellycheckr uses shared trigger settings for both the web prompt and server fallback.

- Episode threshold and timer threshold are both available.
- If both checks are enabled, the first threshold reached triggers the prompt or fallback.
- After a viewer chooses `Continue`, counters reset and the cooldown delays the next prompt.
- Developer mode is available for fast testing, but it is not intended for normal usage.

## Installation

1. In Jellyfin, open `Dashboard > Plugins > Repositories`.
2. Add `https://shtbox.io/jellycheckr/manifest.json` as a custom plugin repository.
3. Open `Catalog`, find `Jellycheckr AYSW`, and install it.
4. Open the plugin configuration page from the dashboard to adjust the behavior.

> [!IMPORTANT]
> If you want the interactive popup inside Jellyfin Web, install the Jellyfin File Transformation plugin as well.
> Without it, the injected Jellyfin Web modal will not appear.
> Jellycheckr can still operate in fallback-only mode for native clients when server fallback is enabled.

## Recommended First-Time Setup

Start simple and tune from real usage.

- Leave the feature enabled.
- Keep both episode and timer checks on unless you specifically want only one trigger style.
- Start with the defaults:
  - `3` episodes
  - `120` minutes
  - `60` second prompt timeout
  - `30` minute cooldown
- Leave server-side fallback enabled if you want coverage on native clients such as Android TV or Firestick.
- If you are testing native-client behavior, turn on fallback dry run first so you can confirm triggers without actually pausing or stopping playback.

## Configuration Guide

### Feature Toggles

These decide which parts of Jellycheckr are active.

- `Feature enabled`: Master switch for all prompt and fallback behavior.
- `Enable server-side fallback`: Lets Jellycheckr manage native clients that cannot show the web prompt.
- `Enable episode checking`: Triggers after a configured number of consecutive episode transitions.
- `Enable timer checking`: Triggers based on the shared time threshold used by Jellycheckr.

### Prompt Timing

These control when Jellycheckr steps in and how long the viewer has to respond.

- `Episode threshold`: How many consecutive episodes can play before prompting.
- `Timer threshold`: The shared time threshold used by the web prompt and native fallback logic.
- `Interaction quiet window`: How long Jellycheckr treats the session as inactive before counting it as no interaction.
- `Prompt timeout`: How long the viewer has before the prompt times out.
- `Cooldown`: How long Jellycheckr waits after `Continue` before it can prompt again.

The current default behavior is:

- Episode threshold: `3`
- Timer threshold: `120` minutes
- Interaction quiet window: `45` seconds
- Prompt timeout: `60` seconds
- Cooldown: `30` minutes

### Native-Client Fallback

These settings control what Jellycheckr does on clients that cannot render the modal.

- `Fallback inactivity threshold`: Requires a period of inactivity before fallback can trigger.
- `Pause before stop`: Pauses first, then stops later if the session does not recover.
- `Pause grace period`: How long to wait after pause before sending stop.
- `Send message before pause`: Attempts to send a Jellyfin client message before pausing.
- `Fallback client message`: The message text to send when messaging is enabled.
- `Fallback dry run`: Logs the trigger path without sending pause or stop commands.

### Developer Tools

These are for testing only.

- `Developer mode`: Fast-cycle trigger mode for validation, not normal playback use.
- `Developer prompt after`: A short test timer used only while developer mode is enabled.

For normal use, leave developer mode off.

## Compatibility And Limitations

- Jellycheckr currently targets Jellyfin `10.9.x`.
- The interactive Jellyfin Web prompt depends on the Jellyfin File Transformation plugin being installed and available.
- Native clients do not show the Jellycheckr modal. They rely on server fallback behavior instead.
- Client messaging before pause is best-effort and may not behave the same across all clients.
- This project is still in active development, so behavior and packaging may continue to change between releases.

## Troubleshooting

### I Installed It But Do Not See The Popup In Jellyfin Web

- Make sure the Jellyfin File Transformation plugin is installed.
- Confirm Jellycheckr is enabled in its configuration page.
- If needed, verify these plugin-served assets load successfully:
  - `/Plugins/Aysw/web/jellycheckr-web.js`
  - `/Plugins/Aysw/web/jellycheckr-config-ui.js`
  - `/Plugins/Aysw/web/jellycheckr-config-ui.css`
  - `/Plugins/Aysw/web/jellycheckr-config-ui-host.html`

### Native Clients Are Not Showing A Prompt

That is expected. Native clients do not render the Jellycheckr modal.

- Leave `Enable server-side fallback` on if you want Jellycheckr to enforce behavior there.
- Use the fallback settings to control pause, stop, grace period, and inactivity handling.

### I Want To Test Without Actually Stopping Playback

- Turn on `Fallback dry run`.
- Leave developer mode off unless you are intentionally doing fast-cycle testing.

### The Plugin Is Too Aggressive Or Not Aggressive Enough

Tune these first:

- `Episode threshold`
- `Timer threshold`
- `Fallback inactivity threshold`
- `Cooldown`

## For Developers

The root README is intentionally focused on Jellyfin admins and plugin usage.

For development, packaging, and release workflow details, see:

- `docs/dev-notes.md`
- `apps/server-plugin/README.md`
- `apps/web-client/README.md`
- `docs/config.md`

jellycheckr

jellycheckr 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

jellycheckr

jellycheckr 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README