FPBInject

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 25)

A powerful ARM Cortex-M runtime code injection tool based on FPB (Flash Patch and Breakpoint)

FPBInject 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# FPBInject

**English** | [中文](README_zh.md)

[![License: MIT](https://img.shields.io/badge/License-MIT-yellow.svg)](https://opensource.org/licenses/MIT)
[![Platform](https://img.shields.io/badge/Platform-STM32F103-blue.svg)](https://www.st.com/en/microcontrollers-microprocessors/stm32f103.html)
[![Platform](https://img.shields.io/badge/Platform-NuttX-blue.svg)](https://github.com/apache/nuttx)
[![Ask DeepWiki](https://deepwiki.com/badge.svg)](https://deepwiki.com/FASTSHIFT/FPBInject)
[![CI](https://github.com/FASTSHIFT/FPBInject/actions/workflows/ci.yml/badge.svg)](https://github.com/FASTSHIFT/FPBInject/actions/workflows/ci.yml)

Runtime code injection for ARM Cortex-M. Replace any function on a running MCU through a serial connection — no reflashing, no debugger, no downtime.

FPBInject uses the [Flash Patch and Breakpoint (FPB)](https://developer.arm.com/documentation/ddi0337/h/debug/about-the-flash-patch-and-breakpoint-unit--fpb-) hardware unit to intercept function calls and redirect them to your custom code in RAM, while the original Flash stays untouched.

![FPBInject Workbench](https://raw.githubusercontent.com/FASTSHIFT/FPBInject/main/Docs/images/webserver-overview.png)

## Traditional vs FPBInject

```mermaid
gantt
    title Iteration cycle comparison (typical STM32 project)
    dateFormat  s
    axisFormat  %Ss

section Traditional
    Edit code          : a1, 0, 5s
    Compile & link     : a2, after a1, 15s
    Erase flash        : a3, after a2, 3s
    Flash write        : a4, after a3, 5s
    MCU reboot         : a5, after a4, 2s
    Reproduce issue    : a6, after a5, 5s

section FPBInject
    Edit code          : b1, 0, 5s
    Compile & inject   : b2, after b1, 1s
    Reproduce issue    : b3, after b2, 5s
```

The traditional cycle touches flash on every iteration — compile, erase, write, reboot, then finally reproduce the issue. With FPBInject, the MCU never stops: save your patch, it's live in under a second. No pit stop required.

## How It Works

```mermaid
flowchart LR
    A["caller()<br/>calls foo()"] -->|"FPB intercepts<br/>foo's address"| B["Trampoline<br/>in Flash"]
    B -->|"Jump to RAM"| C["Your Code<br/>in RAM"]
```

The FPB unit matches the target function's address, redirects execution through a trampoline in Flash, which jumps to your replacement function in RAM. All handled by hardware — zero software overhead on the call path.

## Workbench

FPBInject ships with a browser-based workbench for the full workflow: browse symbols, read disassembly, write patches, and inject — all from one interface.

### Symbol Search & Disassembly

Search the firmware's symbol table, click a function to view its disassembly or decompiled source.

![Disassembly View](https://raw.githubusercontent.com/FASTSHIFT/FPBInject/main/Docs/images/webserver-disasm.png)

### Manual Inject

Write your replacement function in C, then hit inject. The workbench compiles, uploads, and patches — typically under a second.

![Inject View](https://raw.githubusercontent.com/FASTSHIFT/FPBInject/main/Docs/images/webserver-inject.png)

### Auto Inject

Point the workbench at your source directory and enable file watching. Add `/* FPB_INJECT */` before any function you want to patch, then just save the file — the workbench detects the change, recompiles, and re-injects automatically.

![Auto Inject - Editor](https://raw.githubusercontent.com/FASTSHIFT/FPBInject/main/Docs/images/editor-auto-inejct.png)

![Auto Inject - Workbench](https://raw.githubusercontent.com/FASTSHIFT/FPBInject/main/Docs/images/webserver-auto-inject.png)

## File Transfer (Optional)

FPBInject also supports file transfer over serial — browse, upload, and download files on the device's filesystem. Supports drag-and-drop (files and folders), CRC verification, and progress tracking.

Filesystem backends: POSIX (NuttX VFS, Linux), FatFS, standard C library (stdio), or custom implementations via the `fl_fs_ops_t` interface.

![File Transfer](https://raw.githubusercontent.com/FASTSHIFT/FPBInject/main/Docs/images/file-transfer.png)

## Quick Start

### 1. Build & Flash Firmware

```bash
git clone https://github.com/FASTSHIFT/FPBInject.git
cd FPBInject

cmake -B build -DAPP_SELECT=3 -DCMAKE_TOOLCHAIN_FILE=cmake/arm-none-eabi-gcc.cmake
cmake --build build

st-flash write build/FPBInject.bin 0x08000000
```

### 2. Start the Workbench

```bash
cd Tools/WebServer
pip install -r ../requirements.txt
python main.py
```

Open `http://127.0.0.1:5500` in your browser, connect to the serial port, load your ELF file, and start patching.

### 3. Or Use the CLI

All commands output JSON, designed for scripting and AI agent integration.

```bash
# Search for functions
python fpb_cli.py search firmware.elf "gpio"

# View disassembly
python fpb_cli.py disasm firmware.elf digitalWrite

# Inject a patch
python fpb_cli.py --port /dev/ttyACM0 --elf firmware.elf \
    --compile-commands build/compile_commands.json \
    inject digitalWrite patch.c
```

See the [CLI Guide](Docs/CLI.md) for the full command reference.

## Writing Patches

Create a C file with the `/* FPB_INJECT */` marker. The function signature must match the original.

```c
#include <Arduino.h>

/* FPB_INJECT */
__attribute__((section(".fpb.text"), used))
void digitalWrite(uint8_t pin, uint8_t value) {
    printf("Patched: pin=%d val=%d\n", pin, value);
    value ? digitalWrite_HIGH(pin)
          : digitalWrite_LOW(pin);
}
```

> To call the original function from injected code, you need two things: a function pointer pointing directly at the original address (bypassing the FPB redirect), and temporarily disabling the patch around the call. Direct calls by name will still be intercepted by FPB and cause infinite recursion.
>
> ```c
> /* Define a function pointer to the original address (| 1 sets the Thumb bit) */
> typedef void (*digitalWrite_fn_t)(uint8_t, uint8_t);
> static digitalWrite_fn_t const ORIG_DIGITALWRITE = (digitalWrite_fn_t)(0x08001234 | 1);
>
> /* FPB_INJECT */
> __attribute__((section(".fpb.text"), used))
> void digitalWrite(uint8_t pin, uint8_t value) {
>     printf("Patched: pin=%d val=%d\n", pin, value);
>
>     /* Disable patch -> call original via pointer -> re-enable */
>     fpb_enable_patch(0, false);
>     ORIG_DIGITALWRITE(pin, value);
>     fpb_enable_patch(0, true);
> }
> ```
>
> The workbench generates this pattern automatically when the original function address is known.

## Supported Hardware

| Feature | Spec |
|---------|------|
| Architecture | ARMv7-M, ARMv8-M |
| Tested MCU | STM32F103C8T6 |
| Patch Slots | 6 (FPB v1) or 8 (FPB v2) |
| Patch Modes | Trampoline / Direct (ARMv7-M REMAP), DebugMonitor (ARMv8-M BKPT) |
| RTOS Support | Bare-metal, NuttX |
| Connection | Serial (USB-to-UART or USB CDC) |

<details>
<summary>CMake Build Options</summary>

| Option | Default | Description |
|--------|---------|-------------|
| `APP_SELECT` | 1 | Application selection (3 = func_loader) |
| `FL_ALLOC_MODE` | STATIC | Memory allocation: STATIC or LIBC |
| `FPB_NO_DEBUGMON` | OFF | Disable DebugMonitor mode |

</details>

<details>
<summary>Project Structure</summary>

```
FPBInject/
├── Source/                 # FPB driver, trampoline, DebugMonitor
├── App/
│   ├── func_loader/        # Serial protocol, memory allocator, FPB control
│   ├── inject/             # Injection helpers
│   └── tests/              # Firmware unit tests (host-based, with coverage)
├── Project/                # Platform HAL (STM32F10x, Arduino API)
├── Tools/
│   └── WebServer/          # Workbench (Flask backend + JS frontend) & CLI
└── Docs/                   # Architecture, CLI reference, WebServer guide
```

</details>

## Documentation

| Document | Description |
|----------|-------------|
| [Architecture](Docs/Architecture.md) | FPB internals, patch modes, memory layout, protocol |
| [CLI Reference](Docs/CLI.md) | All CLI commands with examples and JSON output format |
| [WebServer Guide](Docs/WebServer.md) | Workbench setup and usage |

## License

[MIT](LICENSE)

## References

- [ARM Cortex-M3 Technical Reference Manual](https://developer.arm.com/documentation/ddi0337)
- [ARMv7-M Architecture Reference Manual](https://developer.arm.com/documentation/ddi0403)
- [STM32F103 Reference Manual](https://www.st.com/resource/en/reference_manual/rm0008.pdf)

FPBInject

FPBInject 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

FPBInject

FPBInject 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README