3dprint_CR6_buildplatepunchtemplate

KO | EN

gitlite — search

#hacktoberfest #ai #android #rust #deep-learning #linux #docker #kubernetes #vue #awesome-list #security #mcp #openai #open-source

3dprint_CR6_buildplatepunchtemplate

(★ 10)

No description available.

3dprint_CR6_buildplatepunchtemplate 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# CR6 Buildplate Punch Template

I bought a [WhamBam magnetic PEX buildplate](https://whambam3d.com/collections/frontpage/products/255-x-245-flexible-build-system-with-pre-installed-pex-build-surface) for my CR6 and wanted to punch holes in the magnetic sticker for the build plate screws.

This is NOT exact measurements for the screws, but it was good enough for my purposes.

I used:
- [10mm punch for M4 screw holes](https://smile.amazon.com/gp/product/B07Q6J9GDN)
- [9mm punch for M3 screw holes](https://smile.amazon.com/gp/product/B07Q6KG2DM)

# Changelog

2021/01/24 - Add photos and readme

## Design

Autocad Fusion 360

# Preview
![checking git](https://raw.githubusercontent.com/gx1400/3dprint_CR6_buildplatepunchtemplate/master/photos/preview1.jpg "checking fit")
![tape to magnet](https://raw.githubusercontent.com/gx1400/3dprint_CR6_buildplatepunchtemplate/master/photos/preview2.jpg "tape to magnet")
![punch holes](https://raw.githubusercontent.com/gx1400/3dprint_CR6_buildplatepunchtemplate/master/photos/preview3.jpg "punch holes")
![install magnet](https://raw.githubusercontent.com/gx1400/3dprint_CR6_buildplatepunchtemplate/master/photos/preview4.jpg "install magnet")
![installed](https://raw.githubusercontent.com/gx1400/3dprint_CR6_buildplatepunchtemplate/master/photos/preview5.jpg "installed")

3dprint_CR6_buildplatepunchtemplate

3dprint_CR6_buildplatepunchtemplate 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

3dprint_CR6_buildplatepunchtemplate

3dprint_CR6_buildplatepunchtemplate 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README