uponorX265

KO | EN

gitlite — search

#python #hacktoberfest #react #typescript #android #linux #docker #nodejs #windows #cli #pytorch #security #ios #open-source

(★ 25)

Uponor Smatrix Pulse X-265 heating system integration for Home Assistant.

uponorX265 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# homeassistant-uponor

[![hacs_badge](https://img.shields.io/badge/HACS-Custom-orange.svg)](https://github.com/hacs/integration)

Uponor Smatrix Pulse X-265 or X-245 with R-208 heating/cooling integration for Home Assistant.

Forked and extended from [dave-code-ruiz/uponorX265](https://github.com/dave-code-ruiz/uponorX265), which was forked from the original (now unmaintained) [asev/homeassistant-uponor](https://github.com/asev/homeassistant-uponor).

## Supported devices

This integration communicates with the **Uponor Smatrix Pulse R-208** communication module.
It has been tested with the X-265 and X-245 controllers. Up to 4 controllers with 12 thermostats each are supported.

## Installation

1. Configure your system in the Uponor Smatrix mobile app and verify that temperature control works.
   Make sure the R-208 module is connected to your local network and note its IP address.

2. Install via HACS as a custom repository, or copy the `custom_components/uponorx265` folder
   to your Home Assistant `/config/custom_components/` folder.

3. Restart Home Assistant.

4. Go to **Settings → Devices & Services → Add Integration → UponorX265** and complete the setup wizard.

## Setup wizard

The setup wizard has four steps:

1. **Connection** — enter the IP address and a name for this gateway.
2. **Controllers** — optionally rename each detected controller. A checkbox lets you choose whether
   controller devices and sensors should be created in HA.
3. **Sensors** — choose which optional sensors to create per thermostat:
   - **Current temperature sensor** (on by default)
   - **Valve binary sensor** (off by default)
4. **Rooms** — optionally rename each detected thermostat/room.

All settings can be changed later via **Settings → Devices & Services → UponorX265 → Configure**.

## Multiple gateways

Multiple R-208 gateways can be added as separate integration instances. Each instance is
fully independent with its own devices, entities, and cached data.

## Entities

### Climate (`climate.ROOM_NAME`)

One climate entity per thermostat.

| Feature | Description |
|---|---|
| Current temperature | Room temperature from the thermostat sensor |
| Target temperature | Read-only when preset is not **HA controlled** (set by the physical dial) |
| HVAC mode | Heat / Cool / Off |
| Presets | See below |

**Presets:**

| Preset | Description |
|---|---|
| Comfort | Normal operation — temperature controlled by the physical thermostat dial |
| ECO | Activated by the thermostat's scheduled ECO profile or Temporary ECO in the mobile app |
| Away | Activated by the Away switch (forces ECO mode on all thermostats) |
| HA controlled | Unlocks target temperature control from Home Assistant |

When the preset is anything other than **HA controlled**, the target temperature is read-only.
Attempting to change it shows a notification explaining that the dial is in control and
the displayed temperature is immediately refreshed from the controller.

Switching away from **HA controlled** immediately re-polls the controller so HA shows the
temperature the physical dial is set to.

**Turn off:** since the Uponor API has no true off command, turning off a climate entity sets
the setpoint to the minimum (heating mode) or maximum (cooling mode) configured limit.

### Switches

| Entity | Description |
|---|---|
| Away | Activates away/ECO mode for all thermostats |
| Cooling mode | Switches the entire system between heating and cooling mode (only shown if cooling is available) |
| HA controlled (per room) | Per-thermostat toggle for HA temperature control (mirrors the HA controlled preset) |
| Included in average (per room) | Toggles whether the thermostat contributes to the controller's average room temperature (enabled in setup, default: off) |

### Sensors

| Entity | Created when |
|---|---|
| Gateway status | Always — shows Online/Offline for the R-208 module |
| Status (controller) | Controller entities enabled in setup |
| Average room temperature | Controller entities enabled in setup |
| Status (thermostat) | Always — shows alarm/error codes for each thermostat |
| Room temperature | Temperature sensor enabled in setup (default: on) |
| Floor temperature | Thermostat has an external floor probe |
| Humidity | Thermostat has a humidity sensor |

### Binary sensors

| Entity | Created when |
|---|---|
| Valve | Valve sensor enabled in setup (default: off) — shows whether the actuator is open |

### Translations

Entity names and sensor states are translated using Home Assistant's translation system.
The language used is the **HA system language** (Settings → System → General → Language),
not the individual user's profile language. Swedish (`sv`) and English (`en`) are supported;
English is the fallback for all other languages.

## Services

### `uponorx265.set_variable`

Sends a raw variable update to the Uponor API. Use with caution.

| Field | Required | Description |
|---|---|---|
| `var_name` | Yes | Variable name, e.g. `sys_heat_cool_mode` |
| `var_value` | Yes | Value to set |
| `device_id` | No | Target gateway device. Required if more than one gateway is configured. |

### `uponorx265.dump_hardware_info`

Returns raw hardware IDs and capability flags for every thermostat and controller
as a service response, shown directly in **Developer Tools → Services**.
Useful for identifying unrecognised device models and reporting them as issues.

Example output:
```yaml
gateways:
  - gateway_id: "101683"
    gateway_model: R-208
    controllers:
      - controller: C1
        sn_start: "4195"
        hardware_type_raw: "0"
        detected_model: X-245
        sw_version: "1.22"
      - controller: C2
        sn_start: "4195"
        hardware_type_raw: "0"
        detected_model: X-245
        sw_version: "1.22"
    thermostats:
      - thermostat: C1_T1
        sn_start: "2692"
        hardware_type_raw: "0"
        detected_model: T-145
        has_humidity_control: 0
        has_humidity_sensor: false
        has_floor_temperature: false
        is_public_device: 0
        is_sensor_only: 0
```

## Limitations

- Heat/cool mode switching applies to the entire system, not individual thermostats.
- The Uponor API does not expose an off command — see climate entity turn off behaviour above.

## Enable debug logging

```yaml
logger:
  default: info
  logs:
    custom_components.uponorx265: debug
```

## Older module

For the older Uponor X-165 module, see: https://github.com/dave-code-ruiz/uhomeuponor

## Feedback

Your feedback, pull requests or any other contribution are welcome.

uponorX265

uponorX265 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

uponorX265

uponorX265 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README