PhoneDriver - GitLite

KO | EN

gitlite — search

#hacktoberfest #react #rust #docker #macos #nodejs #awesome #kubernetes #vue #security #pytorch #ios #openai #open-source

PhoneDriver

(★ 1,607)

Android Phone Control With Qwen3-VL

파일 탐색기

최종 버전 다운로드 (.zip)

- PhoneDriver.png
config.json
LICENSE
phone_agent.py
qwen_vl_agent.py
qwen_vl_utils.py
README.md
ui.py

# 설치 가이드

1. 코드 내려받기

git clone https://github.com/OminousIndustries/PhoneDriver

깃허브에서 프로젝트 코드 전체를 내 컴퓨터로 내려받습니다.

cd PhoneDriver

방금 내려받은 프로젝트 폴더 안으로 이동합니다.

2. 공식 설치 스크립트

쉬움 추천

사전 준비물

APT (Debian/Ubuntu 계열) Debian/Ubuntu 계열 리눅스에 기본 내장된 패키지 매니저입니다.
Python 3 pip 명령어를 쓰려면 Python이 필요합니다.

sudo apt install adb

APT 패키지 저장소에서 바로 설치합니다 (Debian/Ubuntu 계열).

pip install git+https://github.com/huggingface/transformers

PyPI에 배포된 패키지를 바로 설치합니다. 소스 클론이 필요 없습니다.

pip install pillow gradio qwen_vl_utils requests

PyPI에 배포된 패키지를 바로 설치합니다. 소스 클론이 필요 없습니다.

✅ 설치 후 새 터미널을 열고, 프로그램의 버전 확인 명령(예: --version)으로 정상 설치됐는지 확인하세요.

이 레포의 README에 적힌 실제 명령어를 그대로 가져왔습니다.

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Phone Driver

A Python-based mobile automation agent that uses Qwen3-VL vision-language models to understand and interact with Android devices through visual analysis and ADB commands.

<p align="center">
  <img src="Images/PhoneDriver.png" width="600" alt="Phone Driver Demo">
</p>

## Features

- 🤖 **Vision-powered automation**: Uses Qwen3-VL to visually understand phone screens
- 📱 **ADB integration**: Controls Android devices via ADB commands
- 🎯 **Natural language tasks**: Describe what you want in plain English
- 🖥️ **Web UI**: Built-in Gradio interface for easy control
- 📊 **Real-time feedback**: Live screenshots and execution logs

## Requirements

- Python 3.10+
- Android device with USB debugging & Developer Mode enabled
- ADB (Android Debug Bridge) installed
- GPU with sufficient VRAM (Tested on 24gb GPU with Qwen3-VL-8B Model)
- The Repo is set to use the Dense Qwen3-VL 4B/8B Model which performs very well. To swap to an MoE model, see the configuration section below

## Installation

### 1. Install ADB

**Linux/Ubuntu:**
```bash
sudo apt update
sudo apt install adb
```
### 2. Clone Repo & Install Python Dependencies

```bash
git clone https://github.com/OminousIndustries/PhoneDriver.git
cd PhoneDriver
```
Create a Virtual Enviornment

```bash
python -m venv phonedriver
source phonedriver/bin/activate
```
Install Python Deps

```bash
pip install git+https://github.com/huggingface/transformers
# pip install transformers==4.57.0 # currently, V4.57.0 is not released

# Install other requirements
pip install pillow gradio qwen_vl_utils requests
```

### 3. Connect Your Device

1. Enable USB debugging on your Android device (Settings → Developer Options)
2. Connect via USB
3. Verify connection:
```bash
adb devices
```
You should see your device listed.

## Configuration

### Model Selection

Edit `qwen_vl_agent.py` to choose your model:

```python
# For 4B model
model_name: str = "Qwen/Qwen3-VL-4B-Instruct"

# For 8B model 
#model_name: str = "Qwen/Qwen3-VL-8B-Instruct"
```

### If you want to try a Qwen3 MoE model, you need to change the import in `qwen_vl_agent.py` to the following:

```python
#from transformers import Qwen3VLForConditionalGeneration, AutoProcessor  - Comment this import out, it is for the Dense models
# Uncomment the import below for the MoE Variants!!!
from transformers import Qwen3VLMoeForConditionalGeneration, AutoProcessor
```

You will also need to change line 61:

```python
        self.model = Qwen3VLForConditionalGeneration.from_pretrained(
```
Change it to:

```python
        self.model = Qwen3VLMoeForConditionalGeneration.from_pretrained(
```

### Screen Resolution

The agent can auto-detect your device resolution from the Web UI settings tab, but you can manually configure it in `config.json`.

```json
{
  "screen_width": 1080,
  "screen_height": 2340,
  ...
}
```

To get your device resolution, with the device connected to your computer type the following in the terminal: 
```bash
adb shell wm size
```

## Usage

### Web UI (Recommended)

Launch the Gradio interface:

```bash
python ui.py
```

Navigate to `http://localhost:7860` and enter tasks like:
- "Open Chrome"
- "Search for weather in New York"
- "Open Settings and enable WiFi"

### Command Line

```bash
python phone_agent.py "your task here"
```

Example:
```bash
python phone_agent.py "Open the camera app"
```

## How It Works

1. **Screenshot Capture**: Takes a screenshot of the phone via ADB
2. **Visual Analysis**: Qwen3-VL analyzes the screen to understand UI elements
3. **Action Planning**: Determines the best action to take (tap, swipe, type, etc.)
4. **Execution**: Sends ADB commands to perform the action
5. **Repeat**: Continues until task is complete or max cycles reached

## Configuration Options

Key settings in `config.json`:

- `temperature`: Model creativity (0.0-1.0, default: 0.1)
- `max_tokens`: Max response length (default: 512)
- `step_delay`: Wait time between actions in seconds (default: 1.5)
- `max_retries`: Maximum retry attempts (default: 3)
- `use_flash_attention`: Enable Flash Attention 2 for faster inference

## Troubleshooting

**Device not detected:**
- Ensure USB debugging is enabled
- Run `adb devices` to verify connection
- Try `adb kill-server && adb start-server`

**Wrong tap locations:**
- Auto-detect resolution in Settings tab of UI
- Or manually verify with `adb shell wm size`

**Model loading errors:**
- Ensure you have sufficient VRAM
- Try the 8B model for lower memory requirements
- Check that transformers is installed from source

**Out of memory:**
- Use the 8B model instead of 30B
- Reduce `max_tokens` in config
- Close other applications using GPU memory

## License

Apache License 2.0 - see LICENSE file for details

## Acknowledgments

- Built with [Qwen3-VL](https://github.com/QwenLM/Qwen-VL) by Alibaba Cloud
- Uses [Gradio](https://gradio.app/) for the web interface