gba-sound-demo

KO | EN

gitlite — search

#javascript #python #ai #android #deep-learning #linux #java #windows #awesome #kubernetes #vue #security #ios #mcp

(★ 12)

GBA sound demos for testing different sample rates and bit depths

gba-sound-demo 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

GBA Sound Demo
==============

These demos allow you to experiment with different sample rates and bit depths on the Game Boy
Advance.

The GBA is notorious for having bad sound.  Using these demos, you can verify that the GBA hardware
is quite capable of good sound, but it takes special care to setup the timing correctly to produce
a 32K sample rate.

The source code is included, as .gvasm files.

Read the [technical details](./technical-details.md) for more information on how this works.

Playing the Demos
-----------------

The .gba files are in the repo, so you can download them directly:

* [rates.gba](https://raw.githubusercontent.com/velipso/gba-sound-demo/main/rates.gba) ([source](./rates.gvasm))
* [song.gba](https://raw.githubusercontent.com/velipso/gba-sound-demo/main/song.gba) ([source](./song.gvasm))

Both demos have a blinking indicator in the bottom left -- this is used to verify that timing is
correct when using timer based sample rates (16K, 32K, 65K).  Blinking indicates that the VBlank
and Timer IRQ fired at the same exact time.

Rates Demo
----------

![rates.gba](https://github.com/velipso/gba-sound-demo/raw/main/rates.png)

The rates demo will play a tone, and allow you to switch the sample rate, bit depth, dithering,
and hardware sample rate.

Controls:

* L/R - sweep tone
* Start - set tone to 256Hz
* Select - set tone to 4096Hz
* D-pad - change settings
* A/B - change between top or bottom settings (for quick comparison)

The top number is the sample rate of the generated tone.

The bottom numbers are the bit depth and hardware sample rate (set via `SOUNDBIAS`), along with
whether dithering is used when generating the tone.

Song Demo
---------

![song.gba](https://github.com/velipso/gba-sound-demo/raw/main/song.png)

The song demo will play a song at two sample rates -- the top is controlled via vblank, the bottom
is controlled via timers.

Controls:

* Start - restart song
* Anything else - swap between sample rates

How to Build
------------

You will need [gvasm v1](https://github.com/velipso/gvasm#installing-older-version) to assemble the
.gvasm files into .gba files.

After install gvasm, run:

```bash
gvasm make rates.gvasm
```

In order to build the song demo, you must first download some music.

Here's what I did:

1. Installed [youtube-dl](https://ytdl-org.github.io/youtube-dl/download.html)

2. Installed [sox](http://sox.sourceforge.net/)

3. Downloaded the Super Mario 3 Medley:

```bash
youtube-dl -x --audio-format wav -o song.temp --prefer-ffmpeg \
  'https://www.youtube.com/watch?v=5Nu6BxCnyE0'
```

4. Convert it to 13K/8-Bit and 32K/8-Bit:

```bash
sox song.wav -r 13379 -b 8 -c 1 song-A.wav
sox song.wav -r 13379 -b 8 -c 1 song-A.raw
sox song.wav -r 32768 -b 8 -c 1 song-B.wav
sox song.wav -r 32768 -b 8 -c 1 song-B.raw
```

5. Build the .gba file:

```bash
gvasm make song.gvasm
```

gba-sound-demo

gba-sound-demo 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

gba-sound-demo

gba-sound-demo 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README