terraform-multicloud-quickstart

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

terraform-multicloud-quickstart

(★ 31)

A tutorial using ZeroTier + Terraform on multiple clouds

terraform-multicloud-quickstart 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Terraform Multicloud Quickstart

<img src="https://avatars.githubusercontent.com/u/4173285?s=150&v=4" alt="ZeroNSD" /> 

We are living in an ephemeral world 
And I am an ephemeral girl

## Welcome!

This quickstart tutorial creates a lab environment for using ZeroTier
in combination with multiple Terraform cloud providers. If you're a
ZeroTier user that's new to Terraform, You might be looking for the [Terraform Quickstart](https://docs.zerotier.com/terraform/quickstart) instead.

If you're a Terraform user that's new to ZeroTier, you're in the right place. Make yourself a coffee a and buckle up.

## Prerequisites

To follow along step by step, you will need:

- A [Github](https://github.com) account,
- A [ZeroTier Central](https://my.zerotier.com) account,
- A [Terraform Cloud](https://app.terraform.io) account.
- Accounts on multiple cloud providers

The full-blown multicloud demo uses:

- [Digital Ocean](https://www.digitalocean.com/)
- [Amazon Web Services](https://aws.amazon.com/)
- [Google Compute Engine](https://cloud.google.com/compute)
- [Microsoft Azure](https://azure.microsoft.com)
- [Oracle Cloud Infrastructure](https://www.oracle.com/cloud)
- [Alibaba Cloud](https://alibabacloud.com)
- [IBM Cloud](https://www.ibm.com/cloud)
- [Vultr](https://www.vultr.com)
- [Equinix Metal](https://metal.equinix.com)

That's a lot of service providers. You'll need at least two for
demonstration purposes, but I recommend using them all for dramatic
effect. Digital Ocean was chosen at random to provide DNS service for
the lab.

The first time through, you will encounter a few hurdles. Each cloud
vendor brings their own special brand of pain. For example, on AWS,
you will need to accept the Marketplace agreement for the Ubuntu
AMI. On GCP, you will be prompted to enable Cloud APIs. Others have
stringent account verification procedures.

To lower the bar of entry, you can toggle which clouds are
enabled `variables.tf`. The process for creating service accounts and
gathering credentials is outside the scope of this document, but
should be pretty straight forward.

You can do this. We believe in you.

## Import repo

[Import](https://github.com/new/import) the
[Terraform Multicloud Quickstart](https://github.com/zerotier/terraform-multicloud-quickstart)
to your Github account. We are "importing" instead of "cloning" so
that we can set the repository as private.  If you're comforable on
the command line, feel free to clone to your laptop and commits from
there, otherwise, we will use Github's in-browser editing feature to
drive the tutorial.

## Create a Terraform workspace

Next, we create a Terraform workspace and attach it to our private
Github repository. Be sure to select version control
workflow, select the correct Github account, (we want the
private copy, not the original), and give it a unique name.

## Create ZeroTier Central variables

Next, we will use Terraform to create some resources in the ZeroTier
Central API. Before we can do this, we need to give Terraform
credentials as Environment Variables.

## Create ZeroTier Central resources

Examine `main.tf` At the top, you will see Terraform resources for
creating [Identities](https://github.com/zerotier/terraform-provider-zerotier#identities),
[Networks](https://github.com/zerotier/terraform-provider-zerotier#networks),
and [Members](https://github.com/zerotier/terraform-provider-zerotier#members). There
is also a [Token](https://github.com/zerotier/terraform-provider-zerotier#tokens)
that we will use later.

```jsx
resource "zerotier_identity" "instances" {
  for_each = { for k, v in var.instances : k => (v) if v.enabled }
}

resource "zerotier_network" "demolab" {
  name        = "demo.lab"
  description = "ZeroTier Terraform Demolab"
  assign_ipv6 {
    zerotier = true
    sixplane = true
    rfc4193  = true
  }
  assignment_pool {
    start = "10.0.0.1"
    end   = "10.0.0.254"
  }
  route {
    target = "10.0.0.0/16"
  }
}

resource "zerotier_member" "devices" {
  for_each    = var.devices
  name        = each.key
  member_id   = each.value.member_id
  description = each.value.description
  network_id  = zerotier_network.demolab.id
}

resource "zerotier_member" "instances" {
  for_each           = { for k, v in var.instances : k => (v) if v.enabled }
  name               = each.key
  member_id          = zerotier_identity.instances[each.key].id
  description        = each.value.description
  network_id         = zerotier_network.demolab.id
  no_auto_assign_ips = false
  ip_assignments     = [each.value.ip_assignment]
}

resource "zerotier_token" "this" {
  name = "demolab"
}
```

Normally, to kick off a Terraform plan, we would make commits to our
repository. However, since we have a fresh workspace and nothing to
change, we'll need to manually queue our first plan in the Terraform
webUI.

Confirm the plan by clicking "Confirm & Apply" 
 <img src="https://i.imgur.com/lwECXNN.png" alt="confirm plan" width="75%"/>

Congratulations! You have just succesfully created your first ZeroTier
network using Terraform! Go over to
[ZeroTier Central](https://my.zerotier.com) and check out your new
network. Alice and Bob are both authorized onto the network, but don't
worry, they aren't real. We will replace them shortly.

## Edit variables.tf

Terraform has two kinds of variables. We have already seen some
Environmet Variables, which we used to make credentials available to
the [ZeroTier Terraform Provider](https://github.com/zerotier/terraform-provider-zerotier). The
other kinds of variables are known as [Input Variables](https://www.terraform.io/docs/language/values/variables.html). We
will use these to supply some usernames and SSH keys, as well as toggle which clouds we want to use.

Use Github's editor to set the `users`, `devices`, and `instances`
variables. Replace Alice and Bob's information with your own SSH keys
and ZeroTier Node ID's. In the `instances` variable, toggle the clouds
you plan on using to `enabled`.

Save your work by clicking "Commit changes" at the bottom of the page. 
 <img src="https://i.imgur.com/9utqx2i.png" alt="commit changes" width="75%"/>

Go back to your workspace and see that it now says "Planned". Every
time a commit is pushed to the repo, Terraform will queue a plan. This
is the essence of the "Version control workflow" we selected earlier.

Navigate through "Runs" and then "confirm and apply". There is a
setting to make this step automatic, but we will leave it manual for
now.

We now have pre-generated ZeroTier Identities that we will inject into
our cloud instances when we bring them up. They are stored in the
workspace's Terraform State on Terraform Cloud. Be careful about who
has access to your account, as well as source repository that drives it.

## Create Digital Ocean resources

Add your your `DIGITALOCEAN_TOKEN` to the worksace's Environmet Variables using the same procedure as before.

Next, edit main.tf and uncomment the Digital Ocean module.
<img src="https://i.imgur.com/U3aCeNv.png" alt="click on main.tf" width="75%"/>

## Join laptop to Network

The ZeroTier Network can be found in the Terraform output. Find it by
nagivating to the "Outputs" tab of the latest run.
<img src="https://i.imgur.com/MLkTwe6.png" alt="examine outputs" width="75%"/>

You can also find it in the ZeroTier Central webUI.
<img src="https://i.imgur.com/8YIRPMw.png" alt="examine outputs" width="75%"/>

Join your laptop to the network. Make sure to check "Allow DNS"
<img src="https://i.imgur.com/6pYKfyK.png" alt="examine outputs" width="75%"/>

You will be able to SSH into the box. If this does not work, make sure
`username`, `ssh_pubkey` and `member_id` are correct in `variables.tf`. 
<img src="https://i.imgur.com/ya5TVVz.png" alt="ssh to digital ocean" width="75%"/>

## Spin up Multiple Clouds

<img src="https://i.imgur.com/qglRkyw.jpeg" width="75%" alt="Baton Bunny, Copyright 1959 Warner Bros." /> 
Baton Bunny - Warner Bros. 1959

Next, spin up the rest of the cloud instances. Go through each cloud provider,
one by one, adding Environment Variables to the Terraform workspace,
then uncommenting out the corresponding module in `main.tf`.

Here's a complete list of Environment Variables to set if you plan on
spinning up every cloud the tutorial supports.

```bash
# ZeroTier Central
export ZEROTIER_CENTRAL_TOKEN="XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
export ZEROTIER_CENTRAL_URL="https://my.zerotier.com/api"

# Digital Ocean
export DIGITALOCEAN_TOKEN="XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"

# Amazon Web Services
export AWS_ACCESS_KEY_ID="XXXXXXXXXXXXXXXXXXXX"
export AWS_SECRET_ACCESS_KEY="XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
export AWS_REGION="us-east-1"

# Google Compute Platform
export GOOGLE_CREDENTIALS="$(cat key-downloaded-from-gcp-console.json)"
export GOOGLE_CLOUD_PROJECT="XXX-XXXXXX"
export GOOGLE_REGION="us-east4"
export GOOGLE_ZONE="us-east4-a"

# Microsoft Azure
export ARM_SUBSCRIPTION_ID="XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX"
export ARM_TENANT_ID="XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX"
export ARM_CLIENT_ID="XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX"
export ARM_CLIENT_SECRET="XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"

# IBM Cloud
export IBMCLOUD_API_KEY="XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
export IBMCLOUD_REGION="us-east"

# Oracle Cloud Infrastructure
export TF_VAR_compartment_id="ocid1.tenancy.oc1..xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
# please configure ~/.oci/config

# Alibaba Cloud
export ALICLOUD_ACCESS_KEY="XXXXXXXXXXXXXXXXXXXXXXXX"
export ALICLOUD_SECRET_KEY="XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
export ALICLOUD_REGION="us-east-1"

# Vultr
export VULTR_API_KEY="XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"

# Equinix Metal
export METAL_AUTH_TOKEN="XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
```

## Hit the web servers

Each node is running a web server with an example nginx page,
accessible with an internal DNS address.

For example, [http://aws.demo.lab](http://aws.demo.lab/).

## Understanding ZeroTier VL2

ZeroTier networks are virtual Ethernet switches. This means that
anything you can do on a physical LAN segment, ZeroTier can over the
Internet, securely, across clouds, and through NAT devices.

<img src="https://live.staticflickr.com/106/311526846_24b03feedf_w_d.jpg" alt="https://www.flickr.com/photos/valkyrieh116/311526846" width="75%"/> 
Down the Rabbit Hole - Valerie Hinojosa 2006

```bash
laptop:~$ ssh do.demo.lab
```

## Ping all the boxen (v4)

```bash
alice@do:~$ for i in laptop aws gcp azu oci ali ibm vul eqx ; do ping -4 -c 1 $i.demo.lab ; done &>/dev/null
```

## Examine the ARP cache

```bash
alice@do:~$ arp -a | grep demo | sort
ali.demo.lab (10.0.8.1) at 5e:1e:72:fb:14:e4 [ether] on ztyqb6mebi
aws.demo.lab (10.0.2.1) at 5e:6c:4b:3a:05:4f [ether] on ztyqb6mebi
azu.demo.lab (10.0.4.1) at 5e:d5:43:77:15:62 [ether] on ztyqb6mebi
eqx.demo.lab (10.0.9.1) at 5e:11:0c:5d:cd:44 [ether] on ztyqb6mebi
gcp.demo.lab (10.0.3.1) at 5e:5f:43:6c:9a:58 [ether] on ztyqb6mebi
ibm.demo.lab (10.0.6.1) at 5e:38:83:97:55:1a [ether] on ztyqb6mebi
laptop.demo.lab (10.0.0.83) at 5e:27:8a:8d:21:51 [ether] on ztyqb6mebi
oci.demo.lab (10.0.5.1) at 5e:19:d5:76:be:24 [ether] on ztyqb6mebi
vul.demo.lab (10.0.7.1) at 5e:3c:36:a8:9f:9d [ether] on ztyqb6mebi
```

As you can see, the ARP table now contains an entry for each node on
our network, just as it would on a local ethernet network.

## Examine the interfaces

Run the `ip link` command to examine the interfaces on each box.

```bash
alice@do:~$ ip link | grep -A1 zt
4: ztyqb6mebi: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2800 qdisc fq_codel state UNKNOWN mode DEFAULT group default qlen 1000
 link/ether 5e:56:14:d3:25:ed brd ff:ff:ff:ff:ff:ff
```

You'll see a virtual ethernet interface for each ZeroTier network the node is joined to. (in this case, one)

```bash
alice@aws:~$ ip link | grep -A1 zt
3: ztyqb6mebi: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2800 qdisc fq_codel state UNKNOWN mode DEFAULT group default qlen 1000
 link/ether 5e:6c:4b:3a:05:4f brd ff:ff:ff:ff:ff:ff
```

The name of the interface is derived from the network ID it is joined
to. Note that the name of the interface is the same on each machine.

```bash
alice@oci:~$ ip link | grep -A1 zt
3: ztyqb6mebi: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2800 qdisc fq_codel state UNKNOWN mode DEFAULT group default qlen 1000
 link/ether 5e:19:d5:76:be:24 brd ff:ff:ff:ff:ff:ff
```

## Ethernet Tapping

You may have noticed the [flow_rules](https://github.com/zerotier/zerotier-terraform-quickstart/blob/main/flow_rules.tpl)
section in the `zerotier_network` while examining [main.tf](https://github.com/zerotier/zerotier-terraform-quickstart/blob/main/main.tf)
earlier.

```jsx
resource "zerotier_network" "demolab" {
  name        = "demo.lab"
  description = "ZeroTier Terraform Demolab"
  assign_ipv6 {
    zerotier = true
    sixplane = true
    rfc4193  = true
  }
  assignment_pool {
    start = "10.0.0.1"
    end   = "10.0.0.254"
  }
  route {
    target = "10.0.0.0/16"
  }
  flow_rules = templatefile("${path.module}/flow_rules.tpl", {
    ethertap = zerotier_identity.instances["do"].id
  })
}
```

We will use these to gain visibility into our network with tshark. You
can see them reflected in the Central WebUI under the "Flow Rules"
section for the `demo.lab` network. They are documented in in-depth in
chapter 3 of the [ZeroTier Manual](https://www.zerotier.com/manual/#3).

Edit `flow_rules.tpl`, uncommenting the `tee` rule.

```
# drop not ethertype ipv4 and not ethertype arp and not ethertype ipv6;
tee -1 ${ethertap};
# watch -1 ${ethertap} chr inbound;
accept;
```

Flow Rules are applied to every member of the network. `tee` tells
ZeroTier to mirror a copy of every packet to Digital Ocean. Apply the
rule set by saving the file and running Terraform.

```bash
terraform apply -target 'zerotier_network.demolab' -auto-approve
```

## Watching traffic with tshark

On the Digital Ocean machine, view traffic by running tshark on your network's ZeroTier interface.

```
sudo tshark -i ztyqb6mebi not port ssh
```

Open another terminal window, log into AWS, and ping GCP.

```
alice@aws:~$ ping -4 -c 1 gcp.demo.lab
PING gcp.demo.lab (10.0.3.1) 56(84) bytes of data.
64 bytes from gcp.demo.lab (10.0.3.1): icmp_seq=1 ttl=64 time=2.02 ms

--- gcp.demo.lab ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 2.016/2.016/2.016/0.000 ms
```

You will be able to observe the traffic from Digital Ocean.

```
<snip>
37 67.550026693 10.0.2.1 → 10.0.3.1 ICMP 98 Echo (ping) request id=0x0005, seq=1/256, ttl=64
38 67.551676229 10.0.2.1 → 10.0.3.1 ICMP 98 Echo (ping) request id=0x0005, seq=1/256, ttl=64
39 67.551728848 10.0.3.1 → 10.0.2.1 ICMP 98 Echo (ping) reply id=0x0005, seq=1/256, ttl=64 (request in 38)
40 67.551933296 10.0.3.1 → 10.0.2.1 ICMP 98 Echo (ping) reply id=0x0005, seq=1/256, ttl=64
<snip>
```

You'll see duplicates, as the `tee` is picking up both the incoming and outgoing packets from both nodes.
The `watch` rule, combined with the `inbound` characteristic is a
little friendlier.

Edit `flow_rules.tpl`, this time using the `watch` rule.

```
# drop not ethertype ipv4 and not ethertype arp and not ethertype ipv6;
# tee -1 ${ethertap};
watch -1 ${ethertap} chr inbound;
accept;
```

Apply the rule set again with Terraform.

```bash
terraform apply -target 'zerotier_network.demolab' -auto-approve
```

You can also see the the traffic from your laptop when hitting the web
servers. Load the page on IBM Cloud by visiting http://ibm.demo.lab, and
observe the traffic in your Digital Ocean terminal.

```
<snip>
486 1416.628490335 10.0.0.83 → 10.0.6.1 HTTP 541 GET / HTTP/1.1
487 1416.745168511 10.0.6.1 → 10.0.0.83 TCP 66 80 → 56084 [ACK] Seq=7441 Ack=925 Win=62848 Len=0 TSval=2811045625 TSecr=2751470539
488 1416.745410648 10.0.6.1 → 10.0.0.83 TCP 292 HTTP/1.1 200 OK [TCP segment of a reassembled PDU]
489 1416.746737900 10.0.6.1 → 10.0.0.83 TCP 1514 HTTP/1.1 200 OK [TCP segment of a reassembled PDU]
490 1416.747687877 10.0.6.1 → 10.0.0.83 TCP 1514 HTTP/1.1 200 OK [TCP segment of a reassembled PDU]
491 1416.748400578 10.0.6.1 → 10.0.0.83 TCP 1514 HTTP/1.1 200 OK [TCP segment of a reassembled PDU]
492 1416.749430863 10.0.6.1 → 10.0.0.83 TCP 1514 HTTP/1.1 200 OK [TCP segment of a reassembled PDU]
493 1416.750215893 10.0.6.1 → 10.0.0.83 TCP 955 HTTP/1.1 200 OK [TCP segment of a reassembled PDU]
494 1416.750237332 10.0.6.1 → 10.0.0.83 TCP 77 HTTP/1.1 200 OK [TCP segment of a reassembled PDU]
495 1416.750362231 10.0.6.1 → 10.0.0.83 TCP 118 HTTP/1.1 200 OK [TCP segment of a reassembled PDU]
496 1416.750636517 10.0.6.1 → 10.0.0.83 TCP 69 HTTP/1.1 200 OK [TCP segment of a reassembled PDU]
497 1416.750650316 10.0.6.1 → 10.0.0.83 TCP 122 HTTP/1.1 200 OK [TCP segment of a reassembled PDU]
<snip>
```

## Manually manipulate IP addresses

Because ZeroTier behaves like ethernet, we can assign multiple IP addresses to an interface, just like on a physical network.

```bash
alice@aws:~$ ip -4 addr show ztyqb6mebi
3: ztyqb6mebi: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2800 qdisc fq_codel state UNKNOWN group default qlen 1000
 inet 10.0.2.1/16 brd 10.0.255.255 scope global ztyqb6mebi
 valid_lft forever preferred_lft forever
```

Our network is configured as a `/16`, which means we can add any of
the 65,536 available IPv4 addresses to any zerotier interface, on any
machine, and it will work as expected via ARP resolution.

Experiment with this by adding ip addresses from the command line.

```bash
# Amazon Web Services
alice@aws:$ sudo ip addr add 10.0.2.2/24 dev ztyqb6mebi
alice@aws:$ sudo ip addr add 10.0.2.3/24 dev ztyqb6mebi
alice@aws:$ sudo ip addr add 10.0.2.4/24 dev ztyqb6mebi

# Google Compute Engine
alice@gcp:$ sudo ip addr add 10.0.3.2/24 dev ztyqb6mebi
alice@gcp:$ sudo ip addr add 10.0.3.3/24 dev ztyqb6mebi
alice@gcp:$ sudo ip addr add 10.0.3.4/24 dev ztyqb6mebi
```

Clean up after yourself by deleting them.

```bash
# Amazon Web Services
alice@aws:$ sudo ip addr del 10.0.2.2/24 dev ztyqb6mebi
alice@aws:$ sudo ip addr del 10.0.2.3/24 dev ztyqb6mebi
alice@aws:$ sudo ip addr del 10.0.2.4/24 dev ztyqb6mebi

# Google Compute Engine
alice@gcp:$ sudo ip addr del 10.0.3.2/24 dev ztyqb6mebi
alice@gcp:$ sudo ip addr del 10.0.3.3/24 dev ztyqb6mebi
alice@gcp:$ sudo ip addr del 10.0.3.4/24 dev ztyqb6mebi
```

## Native Container Routing

<img src="https://i.imgur.com/QzuTXdA.jpg" width="75%" alt="https://www.flickr.com/photos/agizienski/3605131450" /> 
Amy Gizienski - whale

We would be remiss not to mention containers in the year 2021. A great
attribute of Layer 2 networks is that containers can talk directly to
each other using native routing.

No really.

Pick a box, any box, and start a shell in Docker.

```bash
alice@ibm:~$ docker run -it alpine:latest /bin/sh
alice@ibm:~$ docker run -it alpine:latest /bin/sh
/ # ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
 inet 127.0.0.1/8 scope host lo
 valid_lft forever preferred_lft forever
 inet6 ::1/128 scope host
 valid_lft forever preferred_lft forever
7: eth0@if8: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP
 link/ether 02:42:0a:2a:06:02 brd ff:ff:ff:ff:ff:ff
 inet 10.42.6.2/24 brd 10.42.6.255 scope global eth0
 valid_lft forever preferred_lft forever
 inet6 fcfb:88ae:e176:cdbb:4cc4:242:a2a:602/80 scope global flags 02
 valid_lft forever preferred_lft forever
 inet6 fe80::42:aff:fe2a:602/64 scope link
 valid_lft forever preferred_lft forever
/ #
```

Then, pick another random box and do the same.

```
alice@oci:~$ docker run -it alpine:latest /bin/sh
Unable to find image 'alpine:latest' locally
latest: Pulling from library/alpine
a0d0a0d46f8b: Already exists
Digest: sha256:e1c082e3d3c45cccac829840a25941e679c25d438cc8412c2fa221cf1a824e6a
Status: Downloaded newer image for alpine:latest
/ # ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
 inet 127.0.0.1/8 scope host lo
 valid_lft forever preferred_lft forever
 inet6 ::1/128 scope host
 valid_lft forever preferred_lft forever
5: eth0@if6: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP
 link/ether 02:42:0a:2a:05:02 brd ff:ff:ff:ff:ff:ff
 inet 10.42.5.2/24 brd 10.42.5.255 scope global eth0
 valid_lft forever preferred_lft forever
 inet6 fcfb:88ae:e1b8:5eb5:963e:242:a2a:502/80 scope global flags 02
 valid_lft forever preferred_lft forever
 inet6 fe80::42:aff:fe2a:502/64 scope link
 valid_lft forever preferred_lft forever
/ #
```

Ping the IPv4 and IPv6 addresses of the container, from the other
container.

```
/ # ping 10.42.6.2
PING 10.42.6.2 (10.42.6.2): 56 data bytes
64 bytes from 10.42.6.2: seq=0 ttl=62 time=5.992 ms
64 bytes from 10.42.6.2: seq=1 ttl=62 time=1.441 ms
64 bytes from 10.42.6.2: seq=2 ttl=62 time=1.710 ms
64 bytes from 10.42.6.2: seq=3 ttl=62 time=1.391 ms
64 bytes from 10.42.6.2: seq=4 ttl=62 time=1.520 ms
^C
--- 10.42.6.2 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 1.391/2.410/5.992 ms
/ #
/ # ping fcfb:88ae:e176:cdbb:4cc4:242:a2a:602
PING fcfb:88ae:e176:cdbb:4cc4:242:a2a:602 (fcfb:88ae:e176:cdbb:4cc4:242:a2a:602): 56 data bytes
64 bytes from fcfb:88ae:e176:cdbb:4cc4:242:a2a:602: seq=0 ttl=62 time=1.810 ms
64 bytes from fcfb:88ae:e176:cdbb:4cc4:242:a2a:602: seq=1 ttl=62 time=2.103 ms
64 bytes from fcfb:88ae:e176:cdbb:4cc4:242:a2a:602: seq=2 ttl=62 time=1.388 ms
64 bytes from fcfb:88ae:e176:cdbb:4cc4:242:a2a:602: seq=3 ttl=62 time=1.403 ms
^C
--- fcfb:88ae:e176:cdbb:4cc4:242:a2a:602 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 1.388/1.676/2.103 ms
/ #
```

What black magic is this? Let's examine the routing table.

```
alice@eqx:~$ ip route | grep 42
10.42.1.0/24 via 10.0.1.1 dev ztly57gs2e proto bird metric 64
10.42.2.0/24 via 10.0.2.1 dev ztly57gs2e proto bird metric 64
10.42.3.0/24 via 10.0.3.1 dev ztly57gs2e proto bird metric 64
10.42.4.0/24 via 10.0.4.1 dev ztly57gs2e proto bird metric 64
10.42.5.0/24 via 10.0.5.1 dev ztly57gs2e proto bird metric 64
10.42.6.0/24 via 10.0.6.1 dev ztly57gs2e proto bird metric 64
10.42.7.0/24 via 10.0.7.1 dev ztly57gs2e proto bird metric 64
10.42.8.0/24 via 10.0.8.1 dev ztly57gs2e proto bird metric 64
10.42.9.0/24 dev docker0 proto kernel scope link src 10.42.9.1 linkdown
```

At the bottom of the lab [boot script](https://github.com/zerotier/zerotier-terraform-quickstart/blob/main/init-demolab.tpl)
we've installed a [routing daemon](https://bird.network.cz/) and
gave it a simple OSPF configuration. This propigates the routes
of the Docker networks among all the instances so they can talk over
the ZeroTier network.

But what about IPv6? For that, we've enabled the
[ZeroTier 6PLANE](https://zerotier.atlassian.net/wiki/spaces/SD/pages/7274520/Using+NDP+Emulated+6PLANE+Addressing+With+Docker).

ZeroTier 6PLANE encodes the network's name (8bd5124fd6f45ffe) into
IPv6 addresses, and emulates
[NDP](https://datatracker.ietf.org/doc/html/rfc4861). This allows for
private IPv6 networking to work at massive scales, without actually
having to send the discovery traffic.

## Tear it all down

When you're done experimenting with the lab, tear everything down by
queueing a destroy plan.

terraform-multicloud-quickstart

terraform-multicloud-quickstart 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

terraform-multicloud-quickstart

terraform-multicloud-quickstart 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README