dask-labextension

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

dask-labextension

(★ 329)

JupyterLab extension for Dask

dask-labextension 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Dask JupyterLab Extension

[![Build Status](https://github.com/dask/dask-labextension/actions/workflows/python.yaml/badge.svg)](https://github.com/dask/dask-labextension/actions/workflows/python.yaml) [![Version](https://img.shields.io/npm/v/dask-labextension.svg)](https://www.npmjs.com/package/dask-labextension) [![Downloads](https://img.shields.io/npm/dm/dask-labextension.svg)](https://www.npmjs.com/package/dask-labextension) [![Dependencies](https://img.shields.io/librariesio/release/npm/dask-labextension.svg)](https://libraries.io/npm/dask-labextension)

This package provides a JupyterLab extension to manage Dask clusters,
as well as embed Dask's dashboard plots directly into JupyterLab panes.

![Dask Extension](https://raw.githubusercontent.com/dask/dask-labextension/main/dask.png)

## Explanatory Video (5 minutes)

## Requirements

JupyterLab >= 1.0
distributed >= 1.24.1

## Installation

To install the Dask JupyterLab extension you will need to have JupyterLab installed.
For JupyterLab < 3.0, you will also need [Node.js](https://nodejs.org/) version >= 12.
These are available through a variety of sources.
One source common to Python users is the conda package manager.

```bash
conda install jupyterlab
conda install -c conda-forge nodejs
```

### JupyterLab 4.x

Install the latest version of the extension for the JupyterLab 4
support. You should be able to install this extension with pip or conda,
and start using it immediately, e.g.

```bash
pip install dask-labextension
```

### JupyterLab 3.x

For JupyterLab 3.x, use lastest supported version `6.2.0`.

```bash
pip install dask-labextension==6.2.0
```

### JupyterLab 2.x

Prior to JupyterLab 3.0 client-side and server-side components needed
to be installed separately, with node available on the machine.

The server-side component can be installed via pip or conda-forge:

```bash
pip install 'dask_labextension<5'
```

```bash
conda install -c conda-forge 'dask-labextension<5'
```

You then build the client-side extension into JupyterLab with:

```bash
jupyter labextension install dask-labextension
```

If you are running Notebook 5.2 or earlier, enable the server extension by running

```bash
jupyter serverextension enable --py --sys-prefix dask_labextension
```

## Configuration of Dask cluster management

This extension has the ability to launch and manage several kinds of Dask clusters,
including local clusters and kubernetes clusters.
Options for how to launch these clusters are set via the
[dask configuration system](http://docs.dask.org/en/latest/configuration.html#configuration),
typically a `.yml` file on disk.

By default the extension launches a `LocalCluster`, for which the configuration is:

```yaml
labextension:
  factory:
    module: 'dask.distributed'
    class: 'LocalCluster'
    args: []
    kwargs: {}
  default:
    workers: null
    adapt:
      null
      # minimum: 0
      # maximum: 10
  initial:
    []
    # - name: "My Big Cluster"
    #   workers: 100
    # - name: "Adaptive Cluster"
    #   adapt:
    #     minimum: 0
    #     maximum: 50
```

In this configuration, `factory` gives the module, class name, and arguments needed to create the cluster.
The `default` key describes the initial number of workers for the cluster, as well as whether it is adaptive.
The `initial` key gives a list of initial clusters to start upon launch of the notebook server.

In addition to `LocalCluster`, this extension has been used to launch several other Dask cluster
objects, a few examples of which are:

- A SLURM cluster, using

```yaml
labextension:
    factory:
      module: 'dask_jobqueue'
       class: 'SLURMCluster'
       args: []
       kwargs: {}
```

- A PBS cluster, using

```yaml
labextension:
  factory:
    module: 'dask_jobqueue'
    class: 'PBSCluster'
    args: []
    kwargs: {}
```

- A [Kubernetes cluster](https://github.com/pangeo-data/pangeo-cloud-federation/blob/8f7f4bf9963ef1ed180dd20c952ff1aa8df54ca2/deployments/ocean/image/binder/dask_config.yaml#L37-L42), using

```yaml
labextension:
  factory:
    module: dask_kubernetes
    class: KubeCluster
    args: []
    kwargs: {}
```

## Configuring a default layout

This extension can store a default layout for the Dask dashboard panes,
which is useful if you find yourself reaching for the same dashboard charts over and over.
You can launch the default layout via the command palette,
or by going to the File menu and choosing "Launch Dask Dashboard Layout".

Default layouts can be configured via the JupyterLab config system
(either using the JSON editor or the user interface).
Specify a layout by writing a JSON object keyed by the
[individual charts](https://github.com/dask/distributed/blob/f31fbde748294065ed70dd5c4399821fa664a9f1/distributed/dashboard/scheduler.py#L72-L117)
you would like to open.
Each chart is opened with a `mode`, and a `ref`.
`mode` refers to how the chart is to be added to the workspace.
For example, if you want to split a panel and add the new one to the right, choose `split-right`.
Other options are `split-top`, `split-bottom`, `split-left`, `tab-after`, and `tab-before`.
`ref` refers to the panel to which `mode` is applied, and might be the names of other dashboard panels.
If `ref` is `null`, the panel in question is added at the top of the layout hierarchy.

A concrete example of a default layout is

```json
{
  "individual-task-stream": {
    "mode": "split-right",
    "ref": null
  },
  "individual-workers-memory": {
    "mode": "split-bottom",
    "ref": "individual-task-stream"
  },
  "individual-progress": {
    "mode": "split-right",
    "ref": "individual-workers-memory"
  }
}
```

which adds the task stream to the right of the workspace,
then adds the worker memory chart below the task stream,
then adds the progress chart to the right of the worker memory chart.

## Development install

As described in the [JupyterLab documentation](https://jupyterlab.readthedocs.io/en/stable/extension/extension_dev.html#developing-a-prebuilt-extension)
for a development install of the labextension you can run the following in this directory:

```bash
jlpm  # Install npm package dependencies
jlpm build  # Compile the TypeScript sources to Javascript
jupyter labextension develop . --overwrite  # Install the current directory as an extension
```

To rebuild the extension:

```bash
jlpm build
```

You should then be able to refresh the JupyterLab page
and it will pick up the changes to the extension.

To run an editable install of the server extension, run

```bash
pip install -e .
jupyter serverextension enable --sys-prefix dask_labextension
```

## Publishing

This extension contains a front-end component written in TypeScript
and a back-end component written in Python.
The front-end is compiled to Javascript during the build process
and is distributed as static assets along with the Python package.

### Release process

This requires `node`, `build`, `hatch` and `twine` to be installed.

```bash
# To set version (e.g. 7.0.0). hatch will update version string in package.json
hatch version "7.0.0"

# Examples of bumping version
# minor bump
hatch version minor  # Bumps to 7.1.0
# beta pre-release bump
# If published to pypi this can be installed with the --pre flag to pip
hatch version b  # Bumps to 7.1.0b0
# bump minor and beta
hatch version minor,b  # Bumps to 7.2.0b0
# release all of the --pre-release flags such as alpha beta rc
hatch release  # Bumps to 7.2.0

# git commit after bumping version
git add package.json && git commit -m "Bump version: {version}"
# Tag this version
git tag {version}

# Finally push to main, build and upload package to PyPI
git push upstream main && git push upstream main --tags  # pushes to GitHub
python -m build .  # Build the package
twine upload dist/*  # Upload the package to PyPI
```

### Handling Javascript package version conflicts

Unlike Python, Javascript packages can include more than one version of the same dependency.
Usually the `yarn` package manager handles this okay, but occasionally you might end up with conflicting versions,
or with unexpected package bloat.
You can try to fix this by deduplicating dependencies:

```bash
jlpm yarn-deduplicate -s fewer
```

dask-labextension

dask-labextension 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

dask-labextension

dask-labextension 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README