KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#developer-tools #typescript #claude-code #codex #dsh #dsh-plugin #ai-agent #ai-agents #deepseek-harness #agent-skills #macos #cli

remix-ama

★ 6 Open GitHub ↗

An AMA app built with https://remix.run

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Remix AMA App

![The Remix Blues Stack](https://raw.githubusercontent.com/foysalit/remix-ama/main/public/hero-screenshot.png)

This is an AMA app where any registered user can host an AMA session that lasts for the duration of the day. Any registered user can also participate in any AMA. The app also allows commenting on any Q/A pair on a session.

## Quickstart

Click this button to create a [Gitpod](https://gitpod.io) workspace with the project set up, Postgres started, and Fly pre-installed

[![Gitpod Ready-to-Code](https://img.shields.io/badge/Gitpod-Ready--to--Code-blue?logo=gitpod)](https://gitpod.io/from-referrer/)

## Development

- This step only applies if you've opted out of having the CLI install dependencies for you:

```sh
  npx remix init
  ```

- Start the Postgres Database in [Docker](https://www.docker.com/get-started):

```sh
  npm run docker
  ```

> **Note:** The npm script will complete while Docker sets up the container in the background. Ensure that Docker has finished and your container is running before proceeding.

- Initial setup:

```sh
  npm run setup
  ```

- Run the first build:

```sh
  npm run build
  ```

- Start dev server:

```sh
  npm run dev
  ```

This starts your app in development mode, rebuilding assets on file changes.

The database seed script creates a new user with some data you can use to get started:

- Email: `rachel@remix.run`
- Password: `racheliscool`

If you'd prefer not to use Docker, you can also use Fly's Wireguard VPN to connect to a development database (or even your production database). You can find the instructions to set up Wireguard [here](https://fly.io/docs/reference/private-networking/#install-your-wireguard-app), and the instructions for creating a development database [here](https://fly.io/docs/reference/postgres/).

### Relevant code:

This is a pretty simple note-taking app, but it's a good example of how you can build a full stack app with Prisma and Remix. The main functionality is creating users, logging in and out, and creating and deleting notes.

- creating users, and logging in and out [./app/models/user.server.ts](./app/models/user.server.ts)
- user sessions, and verifying them [./app/session.server.ts](./app/session.server.ts)
- creating, and deleting notes [./app/models/note.server.ts](./app/models/note.server.ts)

## Deployment

This Remix Stack comes with two GitHub Actions that handle automatically deploying your app to production and staging environments.

Prior to your first deployment, you'll need to do a few things:

- [Install Fly](https://fly.io/docs/getting-started/installing-flyctl/)

- Sign up and log in to Fly

```sh
  fly auth signup
  ```

> **Note:** If you have more than one Fly account, ensure that you are signed into the same account in the Fly CLI as you are in the browser. In your terminal, run `fly auth whoami` and ensure the email matches the Fly account signed into the browser.

- Create two apps on Fly, one for staging and one for production:

```sh
  fly create ama-remix-9c55
  fly create ama-remix-9c55-staging
  ```

- Initialize Git.

```sh
  git init
  ```

- Create a new [GitHub Repository](https://repo.new), and then add it as the remote for your project. **Do not push your app yet!**

```sh
  git remote add origin <ORIGIN_URL>
  ```

- Add a `FLY_API_TOKEN` to your GitHub repo. To do this, go to your user settings on Fly and create a new [token](https://web.fly.io/user/personal_access_tokens/new), then add it to [your repo secrets](https://docs.github.com/en/actions/security-guides/encrypted-secrets) with the name `FLY_API_TOKEN`.

- Add a `SESSION_SECRET` to your fly app secrets, to do this you can run the following commands:

```sh
  fly secrets set SESSION_SECRET=$(openssl rand -hex 32) --app ama-remix-9c55
  fly secrets set SESSION_SECRET=$(openssl rand -hex 32) --app ama-remix-9c55-staging
  ```

> **Note:** When creating the staging secret, you may get a warning from the Fly CLI that looks like this:
  >
  > ```
  > WARN app flag 'ama-remix-9c55-staging' does not match app name in config file 'ama-remix-9c55'
  > ```
  >
  > This simply means that the current directory contains a config that references the production app we created in the first step. Ignore this warning and proceed to create the secret.

If you don't have openssl installed, you can also use [1password](https://1password.com/password-generator/) to generate a random secret, just replace `$(openssl rand -hex 32)` with the generated secret.

- Create a database for both your staging and production environments. Run the following:

```sh
  fly postgres create --name ama-remix-9c55-db
  fly postgres attach --postgres-app ama-remix-9c55-db --app ama-remix-9c55

fly postgres create --name ama-remix-9c55-staging-db
  fly postgres attach --postgres-app ama-remix-9c55-staging-db --app ama-remix-9c55-staging
  ```

> **Note:** You'll get the same warning for the same reason when attaching the staging database that you did in the `fly set secret` step above. No worries. Proceed!

Fly will take care of setting the `DATABASE_URL` secret for you.

Now that everything is set up you can commit and push your changes to your repo. Every commit to your `main` branch will trigger a deployment to your production environment, and every commit to your `dev` branch will trigger a deployment to your staging environment.

If you run into any issues deploying to Fly, make sure you've followed all of the steps above and if you have, then post as many details about your deployment (including your app name) to [the Fly support community](https://community.fly.io). They're normally pretty responsive over there and hopefully can help resolve any of your deployment issues and questions.

### Multi-region deploys

Once you have your site and database running in a single region, you can add more regions by following [Fly's Scaling](https://fly.io/docs/reference/scaling/) and [Multi-region PostgreSQL](https://fly.io/docs/getting-started/multi-region-databases/) docs.

Make certain to set a `PRIMARY_REGION` environment variable for your app. You can use `[env]` config in the `fly.toml` to set that to the region you want to use as the primary region for both your app and database.

#### Testing your app in other regions

Install the [ModHeader](https://modheader.com/) browser extension (or something similar) and use it to load your app with the header `fly-prefer-region` set to the region name you would like to test.

You can check the `x-fly-region` header on the response to know which region your request was handled by.

## GitHub Actions

We use GitHub Actions for continuous integration and deployment. Anything that gets into the `main` branch will be deployed to production after running tests/build/etc. Anything in the `dev` branch will be deployed to staging.

## Testing

### Cypress

We use Cypress for our End-to-End tests in this project. You'll find those in the `cypress` directory. As you make changes, add to an existing file or create a new file in the `cypress/e2e` directory to test your changes.

We use [`@testing-library/cypress`](https://testing-library.com/cypress) for selecting elements on the page semantically.

To run these tests in development, run `npm run test:e2e:dev` which will start the dev server for the app as well as the Cypress client. Make sure the database is running in docker as described above.

We have a utility for testing authenticated features without having to go through the login flow:

```ts
cy.login();
// you are now logged in as a new user
```

We also have a utility to auto-delete the user at the end of your test. Just make sure to add this in each test file:

```ts
afterEach(() => {
  cy.cleanupUser();
});
```

That way, we can keep your local db clean and keep your tests isolated from one another.

### Vitest

For lower level tests of utilities and individual components, we use `vitest`. We have DOM-specific assertion helpers via [`@testing-library/jest-dom`](https://testing-library.com/jest-dom).

### Type Checking

This project uses TypeScript. It's recommended to get TypeScript set up for your editor to get a really great in-editor experience with type checking and auto-complete. To run type checking across the whole project, run `npm run typecheck`.

### Linting

This project uses ESLint for linting. That is configured in `.eslintrc.js`.

### Formatting

We use [Prettier](https://prettier.io/) for auto-formatting in this project. It's recommended to install an editor plugin (like the [VSCode Prettier plugin](https://marketplace.visualstudio.com/items?itemName=esbenp.prettier-vscode)) to get auto-formatting on save. There's also a `npm run format` script you can run to format all files in the project.

remix-ama

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README