niri

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 61)

A scrollable tiling Wayland compositor (fork)

niri 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# niri (fork)

This repo houses a fork of [niri](https://github.com/YaLTeR/niri), a scrollable tiling Wayland compositor.

The goal of this fork is to create a Wayland compositor that can, eventually, be used as a drop-in-replacement for KWin,
with (near-)complete support for KDE Plasma & KDE apps.

If you are on NixOS, an easy way to try out this fork is using the provided flake (more at the bottom of this readme).

This readme outlines the main differences between this fork and upstream niri. For more info on upstream's version,
check out the [original readme](./README_orig.md). For more info on what changes are planned and already implemented in
this fork, refer to [this tracking issue](https://github.com/Naxdy/niri/issues/30).

## New Features

### Blur

Windows (both floating and tiling), as well as layer surfaces can have blur enabled on them. Blur needs to be enabled
for each window / layer surface explicitly.

Tiled windows will always draw "optimized" or "x-ray" blur, which is rendered from a shared texture using only the
`bottom` and `background` layer surfaces, and is only updated when one of the layer surfaces changes. Floating windows,
as well as `top` or `overlay` layer surfaces will draw "true" blur by default instead, which is rendered using all
available screen contents and updates at a fixed frame rate.

Note that true blur is rather expensive in terms of GPU load however (even though its frame rate is limited as long as
the window isn't being resized / the layer surface doesn't update), so an option exists to also have these surfaces draw
`x-ray` blur instead.

To set global defaults for blur:

```kdl
layout {
  blur {
    noise 0
    passes 4
    radius 12
  }
}
```

To enable blur for a specific window / layer surface:

```kdl
window-rule {
  match app-id="kitty"
  blur {
    // will enable blur with defaults
    on
  }
}
window-rule {
  match app-id="org.telegram.desktop"
  blur {
    // will enable blur with custom `noise` setting
    // note that this only affects the window _while it is floating_, as
    // tiled windows all share the same optimized blur texture
    on
    noise 4
  }
}
layer-rule {
  match namespace="swaync-notification-window"

// blur will adjust to `geometry-corner-radius`
  geometry-corner-radius 4

blur {
    on

// instead of using `geometry-corner-radius`, you can also
    // define an alpha value here; anything that is more transparent than this
    // value will not be blurred.
    //
    // note that this will require rendering the blurred surface twice, so if possible,
    // prefer using `geometry-corner-radius` instead, for performance reasons.
    ignore-alpha 0.45

// will render "x-ray" blur that is only based on `bottom` and `background` layer surfaces,
    // even if the window is floating. good for minimal GPU load.
    x-ray true

// how often true blur should be redrawn (interval in ms) - has no effect on x-ray blur;
    // this can also be adjusted on a per-window/layer basis, to have certain blurred surfaces update more
    // frequently, and others less so
    draw-interval 150
  }
}
```

> [!NOTE]
>
> Blur has to be enabled on a per-window or per-layer basis, i.e. setting `layout { blur { on } }` does nothing.

This fork also implements the [KDE blur](https://wayland.app/protocols/kde-blur) protocol as well as the
[background effect](https://wayland.app/protocols/ext-background-effect-v1) protocol, meaning that certain apps such as
KDE apps (e.g. plasmashell or krunner), or other compliant apps, are capable of blurring themselves natively, given that
you've defined nonzero `radius` and `passes` for blur elsewhere in your config. This doesn't require you to set
`blur { on }` in your window / layer rules, but having `blur { off }` will disable this behavior entirely.

> [!NOTE]
>
> Config settings are prioritized over client requests, meaning if you have `blur { on }` for a given window, but it
> requests to be un-blurred, your config setting will be prioritized and it will remain blurred.
>
> The same is true for `blur { off }`; such clients will never be able to blur themselves.

#### Caveats

- True blur currently only works for horizontal monitor configurations. When using any sort of 90 or 270 degree
  transformations, only x-ray blur will be available.
- True blur may exhibit some artifacts when rendered above a particularly active surface (e.g. a video player), due to
  the way its performance optimizations are handled. This will be addressed in the future. If performance is not a
  concern, this can be worked around by setting an extremely low draw interval, though be aware that this will heavily
  utilize the GPU.
- True blur will incur a significant performance cost when rendered behind a window that updates frequently, e.g.
  because it's being moved / resized often.

### Window Groups (Tabbed Tiles)

Tiles can be turned into grouped tiles via the `toggle-group` action. Other windows can then be moved into our out of a
group via the `move-window-into-or-out-of-group` action, that accepts a directional parameter. Tabs can be cycled via
the `focus-next-window` and `focus-previous-window` actions. Example config:

```kdl
binds {
  Mod+G {
    toggle-group
  }
  Mod+Tab {
    focus-next-window
  }
  Mod+Shift+H {
    move-window-into-or-out-of-group "left"
  }
  Mod+Shift+L {
    move-window-into-or-out-of-group "right"
  }
  Mod+Shift+K {
    move-window-into-or-out-of-group "up"
  }
  Mod+Shift+J {
    move-window-into-or-out-of-group "down"
  }
}
```

When using `move-window-into-or-out-of-group` on a non-grouped tile, but there is no suitable grouped tile in the
direction you're attempting to move to, the behavior will instead be similar to `consume-or-expel-window`, `-left` or
`-right` respectively, or `move-window`, `-up` or `-down` respectively.

By default, tab titles will be rendered above tab bars. Their appearance can be adjusted under the `tab-indicator`
setting:

```kdl
layout {
  tab-indicator {
    // default is 12
    title-font-size 18

// optional, if you don't want titles to show at all
    hide-titles
  }
}
```

#### Caveats

- When maximizing or fullscreening a grouped tile, the tab indicator will disappear. However, you can still cycle tabs
  using `focus-next-window` and `focus-previous-window`. The newly focused windows will assume the requested maximized /
  fullscreen size upon activating.
- When using `toggle-group` on a single window, the resize animation is a little bit jerky, due to being anchored at the
  top as opposed to anchored at the bottom. Personally, I'm fine with it, but if you happen to be bothered by it and fix
  it on your own branch, feel free to send a patch.

### KDE Screenshots

We now implement the necessary Wayland protocols & dbus interfaces to allow KDE apps to perform screenshots. This
includes e.g. Spectacle and XDG Plasma Portal KDE. We also removed the GNOME screenshot implementation in the process,
meaning if you want Flatpak apps to be able to perform screenshots, you need to use the KDE portal from now on (for
screensharing GNOME is still used, but this will also be changed in the future).

To do this, put the following in your `/etc/xdg/xdg-desktop-portal/kde-portals.conf`:

```
[preferred]
default=kde;gtk
org.freedesktop.impl.portal.Screenshot=kde
org.freedesktop.impl.portal.ScreenCast=gnome
```

> [!NOTE]
>
> The file is called `kde-portals.conf` and not `niri-portals.conf`, because it is required for us to set
> `XDG_CURRENT_DESKTOP=KDE` to enable certain KDE functionality, e.g. in order for XDG Desktop Portal Plasma to expose
> its screenshot interface.

## Removed Features

### Tabbed Columns

Since windows can be grouped on a per-tile basis, column-level tabbing is obsolete. All associated code and config
options have been removed to improve maintainability. If you have any tabbed-column related options in your niri config,
this fork will fail to parse it.

## Future Plans

As of right now, I am trying to keep this fork "as close to upstream as is reasonable", to allow for frequent rebasing
without too many conflicts to solve.

However, in the future, I plan to make several more moderate-to-big changes to this fork, which will cause it to further
diverge from upstream. Once the point is reached where rebasing is no longer feasible, and I have not yet moved on to
TheNextShinyThing™, a rebrand is likely to happen, also to avoid confusion with the upstream project.

### KDE Screencasting

Above all, and next on my agenda, I'd like to implement the
[KDE screencast](https://wayland.app/protocols/kde-zkde-screencast-unstable-v1) wayland protocol, since
`xdg-desktop-portal-kde` provides a UI for region screencasting since
[my PR was merged upstream](https://invent.kde.org/plasma/xdg-desktop-portal-kde/-/merge_requests/161).

Although niri does have dynamic screencasting already, which is an amazing feature (that I fully intend to keep),
regional screencasting provides some additional functionality that I miss, such as streaming two or more windows side by
side, without having to share the entire screen.

I have yet to ascertain the feasibility of this venture however, since `xdg-desktop-portal-kde` interacts with `kwin` in
more ways behind the scenes, e.g. to show live window share previous, and I haven't yet determined which of these "extra
features" are requirements for the compositor to support, and which are optional to implement.

### More KDE Protocols

In general, niri leans in pretty heavily into Gnome for its portal functionality. Given that I'm more familiar with KDE,
and also work on KDE software myself every now and again, I plan to rewrite this fork to use more of KDE's stuff
instead.

Some examples include the ability to view (and perhaps change?) monitor settings from KDE's system settings, and
supporting [KDE's blur protocol](https://wayland.app/protocols/kde-blur), among others.

### Refactors & Macros

There are a couple areas of the code that would benefit from refactors and / or custom macros to improve both
maintainability and readability. One such example is
[this implementation of `From<niri_ipc::Action>`](https://github.com/YaLTeR/niri/blob/79e41d7d88de44356b48400515076bf5593544e8/niri-config/src/binds.rs#L390-L698).

This also includes raising the MSRV, and upgrading this project's edition from 2021 to 2024, since this will provide
many code quality features, with one of my most-wanted being
[let chains](https://doc.rust-lang.org/nightly/edition-guide/rust-2024/let-chains.html).

## Flake

This project provides a flake, intended to be used with NixOS and / or
[home-manager](https://github.com/nix-community/home-manager).

To use it, simply import the module it provides into your config:

```nix
{
  inputs = {
    nixpkgs.url = "github:NixOS/nixpkgs/nixos-unstable";
    niri.url = "github:Naxdy/niri";

# optional, if you use home-manager
    home-manager.url = "github:nix-community/home-manager";
  };

outputs = { self, nixpkgs, niri }: {
    nixosConfigurations.my-system = nixpkgs.lib.nixosSystem {
      system = "x86_64-linux";
      modules = [
        # optional, if you use home-manager
        home-manager.nixosModules.default

niri.nixosModules.default
        ({ config, lib, pkgs, ... }: {
          # takes care of setting up portals & other system services
          programs.niri.enable = true;

# I highly recommend using UWSM, as it makes session management extremely convenient
          programs.uwsm = {
            enable = true;
            waylandCompositors.niri = {
              prettyName = "niri";
              comment = "niri compositor (fork) managed by UWSM";
              binPath = "/run/current-system/sw/bin/niri";
            };
          };

environment.systemPackages = [
            pkgs.xwayland-satellite
          ];

# optional, if using home-manager
          home-manager = {
            users.my-username = {
              imports = [
                niri.homeManagerModules.default
              ];

wayland.windowManager.niri = {
                enable = true;
                # use the package from `programs.niri.package`, which is set by `niri.nixosModules.default`
                package = null;
                # fully declarative niri configuration; converted to kdl during rebuild
                #
                # - simple entries without arguments are declared as `name = [];`
                # - named arguments are declared using `_props`
                # - multiple entries with the same name and different contents are declared using `_children`
                #
                # one caveat in this config is that toplevel primitive type options cannot be declared multiple times,
                # e.g., you can only have one `spawn-at-startup` entry here, but at least that shouldn't matter
                # too much when using UWSM.
                settings = {
                  layout = {
                    preset-window-heights._children = [
                      { proportion = 0.33333; }
                      { proportion = 0.5; }
                      { proportion = 0.66667; }
                    ];
                  };

window-rule = [
                    # applies to all windows
                    {
                      geometry-corner-radius = 10;
                      clip-to-geometry = true;
                      draw-border-with-background = false;
                    }
                    # single match
                    {
                      match._props.app-id = "kitty";
                      opacity = 0.885;
                    }
                    # multiple matches
                    {
                      match = [
                        { _props.app-id = "kitty"; }
                        { _props.app-id = "org.telegram.desktop"; }
                      ];

blur = {
                        on = [ ];
                      };
                    }
                  ];

binds = {
                    XF86AudioPause = {
                      _props.allow-when-locked = true;
                      spawn = [
                        "playerctl"
                        "play-pause"
                      ];
                    };
                    XF86AudioPlay = {
                      _props.allow-when-locked = true;
                      spawn = [
                        "playerctl"
                        "play-pause"
                      ];
                    };
                    "Mod+Shift+P".maximize-window-to-edges = [ ];
                    "Mod+Shift+S".spawn = [
                      "flameshot"
                      "gui"
                    ];
                  };
                };
              };
            };
          };
        })
      ];
    };
  };
}
```

niri

niri 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

niri

niri 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README