KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#dsh #dsh-plugin #ai-agents #developer-tools #codex #claude-code #mcp #rust #deepseek-harness #typescript #ai-agent #cli

ha_komfovent_config

★ 49 Open GitHub ↗

Set of files for configuring MODBUS connection to a Komfovent Unit

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Komfovent C6 & C6M Home Assistant Package

**Draft under construction**

A file for configuring MODBUS connection to a Komfovent Unit

This uses the Home Assistant 'Package' system.

Add it to your config folder (or a subfolder) - just change the path and include this in your `configuration.yaml` file

```yaml
homeassistant:
  packages:
    komfovent: !include komfovent.yaml
```

Add your IP address and it should just work.

Thanks for th ideas from the [Community Thread](https://community.home-assistant.io/t/modbus-sensor-tcp-for-komfovent/173215)

## Features

### Switches

### Sensors

Where appropriate the sensors all include the correct

* `unit_of_measurement`
* `device_class`
* `state_class`

#### Register decode Sensors

#### Convert to State Value

### Shell Commands

These negate the need for physical relays

* Kitchen Mode
* Fireplace Mode
* Override Mode

### Binary Sensor

Decode register 900

## Lovelace Cards

For the sample cards to work, you need to install this button package https://github.com/custom-cards/button-card and this Number card https://github.com/htmltiger/numberbox-card

### Main Panel

**Note**: Humidity and CO<sub>2</sub> are from separate sensors.

![Main Panel](https://raw.githubusercontent.com/borpin/ha_komfovent_config/main/main_panel.png)

### Eco Mode

![Eco Mode](https://raw.githubusercontent.com/borpin/ha_komfovent_config/main/eco_mode.png)

### Recuperation (with power off)

![Recuperation](https://raw.githubusercontent.com/borpin/ha_komfovent_config/main/recuperation.png)

ha_komfovent_config

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README