Xiaomi-Mi-Router-4C-CH341A-Flasher

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

Xiaomi-Mi-Router-4C-CH341A-Flasher

(★ 46)

OPENWRT, XWRT, IMMORTALWRT, PADAVAN, KEENETIC, STOCK, PCWRT Installation & Recovery Firmware for Xiaomi Mi Router 4C using CH341A Mini Programmer

Xiaomi-Mi-Router-4C-CH341A-Flasher 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Notes
> [!Note]
> - Unchecked `Verify` from the programmer settings before flashing it
> - `Unprotect` eeprom before flashing..
> - Dangerous and irreversible actions, set only required options (if may failed buy a new ones and then soldered it unto the board)
> - If the programmer fails to read the eeprom sectors all you have to do is read the `SREG or Status Register` and `unchecked all `checked area or set all number `1` into `0` and then `Write Register`.

# [Firmware](https://github.com/xiv3r/Xiaomi-Mi-Router-4C-CH341A-Flasher/releases/tag/V1)
> supported firmware

# Windows Requirements

- [Dump Firmware](https://github.com/xiv3r/Xiaomi-Router-4C-CH341A-flasher/releases/tag/V1)

- [AsProgrammer](https://github.com/nofeletru/UsbAsp-flash/releases)

- Drivers [CH341PAR.EXE](https://raw.githubusercontent.com/xiv3r/Xiaomi-Mi-Router-4C-CH341A-Flasher/main/CH341PAR.EXE) & [CH341SER.EXE](https://raw.githubusercontent.com/xiv3r/Xiaomi-Mi-Router-4C-CH341A-Flasher/main/CH341SER.EXE)

# Setup
> connect the ch341a clip to Xiaomi 4c router EEPROM, open asprogrammer then `detect` the chip select the specific router IC model, click `read` the IC and make a backup then proceed to erase ic, load the 16mb firmware into it (stock, openwrt, padavan, keenetic, immortal) then click `write` IC click yes and wait after it finish finally connect your router to your pc and open 192.168.1.1(3rd party) or 192.168.31.1(stock)

![image](https://github.com/xiv3r/Xiaomi-Mi-Router-4C-CH341A-Flasher/blob/main/src/prog.png)

![IMG_20230723_083113](https://github.com/xiv3r/Xiaomi-Router-4C-CH34A-flash-firmware/assets/117867334/8c399a16-f7a1-4e77-b900-d4bfa674f79d)

![IMG_20230723_083150](https://github.com/xiv3r/Xiaomi-Router-4C-CH34A-flash-firmware/assets/117867334/bf2053cc-a585-41b9-b8a0-b150ddcbd87e)

![image](https://github.com/xiv3r/Xiaomi-Router-4C-CH34A-flash-firmware/assets/117867334/32c84a15-dd5d-43b0-87b1-6be5aeccad41)

![image](https://github.com/xiv3r/Xiaomi-Router-4C-CH34A-flash-firmware/assets/117867334/76807418-5626-4829-a0f4-aebe305701ba)
![image](https://github.com/xiv3r/Xiaomi-Router-4C-CH34A-flash-firmware/assets/117867334/5621d78b-b314-4ba8-8fec-1badffd65141)

> Red wire must be connected to this pin #1 (dot) in chip

![image](https://github.com/xiv3r/Xiaomi-Router-4C-CH34A-flash-firmware/assets/117867334/466c5aad-61c9-498a-bd1e-c9171fe64c86)

--------------------
# Linux Requirements

## Install Driver (optional)
[See more...](https://github.com/WCHSoftGroup/ch341ser_linux)
```
sudo apt update
sudo apt install make cmake bc build-essential -y
git clone https://github.com/xiv3r/Xiaomi-Mi-Router-4C-CH341A-Flasher.git
cd Xiaomi-Mi-Router-4C-CH341A-Flasher/driver/ch341a-ser
sudo make
sudo make load
sudo make install
```
- Check the existing drivers
```sh
lsmod | grep ch341
Bus 001 Device 002: ID 1a86:5512 QinHeng Electronics HL-340 USB-Serial adapter
ch341                  20480  0
usbserial             45056  1 ch341
```
![Screenshot_20230801_132017](https://github.com/xiv3r/Xiaomi-Router-4C-CH341A-flasher/assets/117867334/fc367842-6724-4f66-80a5-6409bd93190b)

# IMSProg:

> [!Note]
> - if the EEPROM unable to read by the programmer go to `Imsprog Settings` -> `CHIP Info` -> `Read Status Register` and replace all number `1` into `0` and `Write` then begin flashing the firmware.

- Download and install IMSProg
```sh
sudo apt update
sudo apt install imsprog -y
```

- Dependencies
```sh
sudo apt install bc build-essential gcc cmake make linux-headers-$(uname -r) cmake g++ libusb-1.0-0-dev qtbase5-dev qttools5-dev pkgconf systemd-dev udev zenity wget -y
```
- Install from Repo (optional)
```sh
wget https://launchpad.net/~bigmdm/+archive/ubuntu/imsprog/+files/imsprog_1.4.4-4_amd64.deb -O imsprog.deb && sudo dpkg -i imsprog.deb && sudo apt --fix-broken install -y && sudo dpkg --configure -a
```
- Build from Source (optional)
```sh
git clone https://github.com/bigbigmdm/IMSProg.git && cd IMSProg
cd IMSProg_programmer
mkdir build
cd build
cmake ..
make -j`nproc`
sudo make install
```
- [IMSProg overview](https://github.com/bigbigmdm/IMSProg)

- Select IMSProg from the Application Menu

# Flashrom
```sh
sudo apt update
sudo apt install flashrom -y
```

> [!Note]
> - chip type depends on your EEPROM type detected by flashrom like GD25B128B/'GD25Q128B', GD25Q127C/'GD25Q128C' you may add it to the -c flags before backup or flashing

- To Detect the Flash Chip execute the command below:
```sh
flashrom -VV -p ch341a_spi -r backup.bin
```
- Backup the Dump firmware: 
```sh
flashrom -VV -p ch341a_spi -c GD25B128B/GD25Q128B -r MIR4C-dump.bin
```
- Flash Newly Dump firmware:
```sh
flashrom -VV -p ch341a_spi -c GD25B128B/GD25Q128B -v -E -w /home/user/Downloads/MIR4C-dump.bin
```

<details><summary>
 
# Termux
> flash the firmware without the programmer

</summary>

## Requirements
- Access Point Router/CPE (Wired Bridge) (required) if `ALL` exist in the MTD partition tables
- CH341A Programmer (optional) if there's no `ALL` existed in the MTD partition tables
- Termux

• Dependencies:
```sh
pkg update && pkg upgrade -y && pkg install git wget python python-pip -y
```
## Notes
> [!Note]
> - To check mtd partitions `cat /proc/mtd`
> - If mtd `ALL` partition is found you can flash it easily, if not otherwise flash the eeprom with CH341a programmer
> - MTD `ALL` Partition can flash all 16MB dump firmware from the download section
> - Keenetic Breed `Programmer Firmware` can Flash all 16MB dump firmware from the download section
> - All 16MB firmware dump are stable for transitioning
> - You can use wget, scp, http fileserver to import firmware into `/tmp` directory and flash

## Method to import the firmware
> opt 1
  - `cd storage/downloads && scp 16mb_firmware.bin root@192.168.1.1:/tmp`
> opt 2
  - `cd storage/downloads && python3 -m http.server` (dhcp ip assign):8000 e.g: `wget 192.168.1.111:8000/16mb_firmware.bin`
> opt 3
  - `cd /tmp && wget https://github.com/xiv3r/Xiaomi-Mi-Router-4C-CH341A-Flasher/releases/download/V1/Full-KeeneticOS_4.1.7_MOD.bin`

## Flash
  - `mtd -e ALL -r write /tmp/16mb_firmware.bin ALL`

## Transition from Stock to other Firmware
• Using my Modified version of openwrt-invasion
```sh
termux-setup-storage && pkg update && pkg upgrade && pkg install curl && curl https://raw.githubusercontent.com/xiv3r/termux-openwrt-invasion/refs/heads/main/openwrt-invasion.sh | sh && cd openwrt-invasion
```

• `Reset` the Xiaomi 4C Router and configure with a password of `12345678`
```sh
python3 remote_command_execution_vulnerability.py
```

• Getting root access via Telnet
```sh
 telnet 192.168.31.1
```
  - login:`root`
  - password:`root`

- Download the firmware from [Here!](https://github.com/xiv3r/Xiaomi-Mi-Router-4C-CH341A-Flasher/releases/download/V1/)
   - e.g
```sh
cd /tmp && wget -O Keenetic.bin https://github.com/xiv3r/Xiaomi-Mi-Router-4C-CH341A-Flasher/releases/download/V1/Full-KeeneticOS_4.1.7_MOD.bin
```
## Flash
```sh
mtd -e ALL -r write /tmp/keenetic.bin ALL
```
- Wait for 15 minutes until the reboot will prompted
- Goto [192.168.1.1](http://192.168.1.1/)

## Openwrt/Xwrt/Immortalwrt/Pcwrt to Keenetic and other Firmware
- Import the [Xiaomi_4C_Router_Breed.bin](https://github.com/xiv3r/Xiaomi-Mi-Router-4C-CH341A-Flasher/blob/main/Xiaomi_4C_Router_Breed_Env_Variables.bin)
```sh
telnet 192.168.1.1
```
 - user:`root`
 - pass:`your admin password`
 
- Bootloader breed installation
```sh 
opkg update && opkg install kmod-mtd-rw && insmod mtd-rw i_want_a_brick=1
```
```sh
cd /tmp && wget -O breed.bin https://github.com/xiv3r/Xiaomi-Mi-Router-4C-CH341A-Flasher/blob/main/Xiaomi_4C_Router_Breed_Env_Variables.bin
```
## Flash
```sh
mtd -r write /tmp/breed.bin bootloader
```
- Router will reboot
- Goto 👉 [192.68.1.1](http://192.168.1.1) > `upgrade` > `Programmer firmware` > import `keenetic 16MB dump` from download 
<img src="https://github.com/xiv3r/Xiaomi-Mi-Router-4C-CH341A-Flasher/blob/main/src/backup.jpg">

- Unchecked `skip bootloader`
- Unchecked `skip eeprom`
- Upload

`OpenWRT WiFi tx power mod to 30dBm`
```sh
wget -qO- https://raw.githubusercontent.com/xiv3r/20dBm-30dBm-Xiaomi-Mi-4C-Router-Mod/refs/heads/main/mtd2-mod.sh | sh
```

## Keenetic to Openwrt and other Firmware
- Hold the reset button for 5 seconds while powering on the router
- Goto 👉[192.168.1.1](http://192.168.1.1) > `upgrade` > `programmer firmware` > import `openwrt 16MB dump` from download
<img src="https://github.com/xiv3r/Xiaomi-Mi-Router-4C-CH341A-Flasher/blob/main/src/backup.jpg">

- Unchecked `skip bootloader`
- Unchecked `skip eeprom`
- Apply

## Padavan to other Firmware
- `telnet 192.168.1.1` and login your credentials
- Import `16mb dump firmware.bin` to `/tmp`
- e.g ` cd /tmp && wget -O keenetic.bin https://github.com/xiv3r/Xiaomi-Mi-Router-4C-CH341A-Flasher/releases/download/V1/Full-KeeneticOS_4.1.7_MOD.bin`
## Flash
```sh
mtd -e ALL -r write /tmp/keenetic.bin ALL
```
</details>

# [USB MOD](https://github.com/xiv3r/Xiaomi-Mi-Router-4C-CH341A-Flasher/blob/main/src/USB-MOD.jpg)
> USB Mod support for USB Ethernet (USB Tethering/RNDIS), USB Modem (4G/LTE/5G) and USB storage (NAS).

# ⚠️ FIRMWARE DISTRIBUTION DISCLAIMER
```txt
This firmware is provided for non-commercial use only. Redistribution is strictly prohibited.
- You may Install this firmware on devices for which it was intended.

By using this firmware, you acknowledge that:  
- Unauthorized distribution violates intellectual property rights.  
- The provider assumes **no liability** for damages from misuse.  
```

Xiaomi-Mi-Router-4C-CH341A-Flasher

Xiaomi-Mi-Router-4C-CH341A-Flasher 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Xiaomi-Mi-Router-4C-CH341A-Flasher

Xiaomi-Mi-Router-4C-CH341A-Flasher 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README