Kenbakuino

KO | EN

gitlite — search

#hacktoberfest #ai #go #golang #android #rust #docker #java #cli #awesome-list #vue #pytorch #mcp #ios

(★ 24)

Arduino emulation of the KENBAK-1

Kenbakuino 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Kenbakuino
Arduino emulation of the KENBAK-1

This is an Arduino-based emulation of the 
[KENBAK-1](https://en.wikipedia.org/wiki/Kenbak-1 "Wikipedia"), considered by some to be the first "personal computer".  It was first advertised for sale in the September 1971 issue of Scientific American.

![](http://www.funnypolynomial.com/software/arduino/KEN_01.jpg)

Additional photos of my build (2011) are [here](https://www.flickr.com/photos/funnypolynomial/sets/72157627738613990/ "Flickr").

Original links [here](http://www.funnypolynomial.com/software/arduino/kenbak.html "funnypolynomial.com").

See **kenbakuino.txt** for detailed information about the sketch.  It attempts to accurately emulate the original, but with some extensions: read from an RTC, generate random numbers, load built-in programs, etc.

**Note** if you download the **zip** from GitHub, after unzipping you will need to rename the "Kenbakuino-master" folder to just "Kenbakuino" since the IDE requires the folder to match the ino filename.

**You can now buy a [kit](https://www.adwaterandstir.com/kenbak/) which uses the sketch and more closely matches the look of the original.**

Changes since the original:

**Dec '18** Extension #8: Send/Receive Memory over Serial. See serial.txt

**May '19** 
1. Extension #9: Auto-Run Program/Reset Configuration 
2. Constants to configure RTC

**Jun '19**
SYSX extensions to copy RAM to/from EEPROM. See memcopy.txt

**Feb '20**
By request, a couple of 24-hour mode versions of the BCD clock (STOP+Bit3). See 24hourBCDclocks.txt

**Apr '21**
Corrected CLR+STOR typo and SysInfo bug re delay set to 0ms.

**May '21**
Fixed right-shift sign extension and issues with multi-bit roll instructions.

**NOTE**: right-shift now preserves the "sign" as per original KENBAK-1. 0377 shifted right 1 is 0377!

**Sep '22**
Fixed program counter increment to happen after instruction executed.

**NOTE**: `.lbl LDA 003` now sets A to lbl rather than lbl+2

**Nov '24**
Turn RUN LED off when HALT encountered or STOP pressed (see MCP_LEGACY_RUN_LED).

**May '25** 
Corrected 74HC595 connections to LEDs (Q0==LED7) in Pins.h schematic. No code change.

Schematic (taken from PINS.H)
````
#ifndef pins_h
#define pins_h

// Pin assignments
// DS1307 - RTC (wire library)
#define PIN_RTC_SDA	A4
#define PIN_RTC_SCL	A5

// 74HC595 - LED driver
#define PIN_LEDS_DS	8
#define PIN_LEDS_ST	9
#define PIN_LEDS_SH	10

// 74HC165 - Switch driver
#define PIN_BTN_Q7	A0
#define PIN_BTN_CP	13
#define PIN_BTN_PL	12

// LEDS - direct connection
#define PIN_LED_INP	A1
#define PIN_LED_ADDR	A2
#define	PIN_LED_MEM	A3
#define PIN_LED_RUN_PWM	11

/*********************************************************
This is a *SCHEMATIC*
Pins not listed are unused/floating.
Component list: 
  ATMega328, RTC module (DS1307), 74HC595, 74HC165 (x2), 
  LED (x12), Push-button normally open (x15), 
  Resistor 220 Ohm (x12), Resistor 10k Ohm (x15),
  16MHz crystal.
                 "KENBAK-uino" - Mark Wilson, 2011
                 +-----------+
                 |    328    | 
  <USB>--[+5V]---+Vcc   PWM11+-------<LED11 "RUN">
  <USB>--[+5V]---+AVcc     A3+-------<LED10 "MEM">
  <USB>--[GND]---+Gnd(22)  A2+-------<LED9  "ADDR">
  <USB>--[GND]---+Gnd(8)   A1+-------<LED8  "INP">
  <USB>---[TX]---+TX         | 
  <USB>---[RX]---+RX         |        +-----------+
                 |           |        |    595    |    **Note the order!**
      [XTAL1]----+XT1      10+--------+SH(11)   Q0+----<LED7 "Bit7"> MSB
      [XTAL2]----+XT2       9+--------+ST(12)   Q1+----<LED6 "Bit6">
                 |          8+--------+DS(14)   Q2+----<LED5 "Bit5">
                 |           |  [+5V]-+Vcc(16)  Q3+----<LED4 "Bit4">
                 |           |  [GND]-+Gnd(8)   Q4+----<LED3 "Bit3">
                 |           |  [+5V]-+MR(10)   Q5+----<LED2 "Bit2">
                 |           |  [GND]-+OE(13)   Q6+----<LED1 "Bit1">
                 |           |        |         Q7+----<LED0 "Bit0"> LSB
                 |           |        +-----------+
+------+         |           |
| RTC  |         |           |             +-----------+
|   SDA+---------+A4         |             |   165-1   |    **Note the order!**
|   SCL+---------+A5       A0+-------------+Q7(9)    D0+----<SW0 "Bit0">
|   Vcc+-[+5V]   |         13+-----+-------+CP(2)    D1+----<SW1 "Bit1">
|   Gnd+-[GND]   |         12+--+  |       |         D2+----<SW2 "Bit6">
+------+         +-----------+  +--|-------+PL(1)    D3+----<SW3 "Bit7">
                                |  | [GND]-+Gnd(8)   D4+----<SW4 "Bit4">
                                |  | [GND]-+CE(15)   D5+----<SW5 "Bit5">
                                |  | [+5V]-+Vcc(16)  D6+----<SW6 "Bit2">
                                |  |    +--+DS(10)   D7+----<SW7 "Bit3">
                                |  |    |  +-----------+
                                |  |    |  
                                |  |    |  
                                |  |    |  +-----------+
                                |  |    |  |   165-2   |    **Note the order!**
                                |  |    +--+Q7(9)    D0+----<SW8  "STOP">
                                |  +-------+CP(2)    D1+----<SW9  "STRT">
                                |          |         D2+----[GND] (SW15 is unused)
                                +----------+PL(1)    D3+----<SW10 "CLR">
                                     [GND]-+Gnd(8)   D4+----<SW11 "DISP">
                                     [GND]-+CE(15)   D5+----<SW12 "SET">
                                     [+5V]-+Vcc(16)  D6+----<SW13 "READ">
                                           |         D7+----<SW14 "STOR">
                                           +-----------+

where:
                   _  (Push-button, Normally Open)
                  + +
--<SWx> is   --+--+ +----[+5V]
               |
               +-[10kR]--[GND]

--<LEDx> is  --[220R]--[LED]--[GND]

**Note the order!**
Bitx/LEDx:
This is the way I wired the '595 pins to the data LEDs.
The leftmost pin goes to the leftmost LED.
This is the reverse of the logical order, Q0 != Bit0 although that is what I used to show here.
You are free to reverse the order so Q0 == Bit0
BUT you will need to change LSBFIRST in void LEDs::ShiftOut(byte LEDs) to MSBFIRST.

SWx:
This reflects the order I wired my switches to '165 pins.  
You are free to change this to match the physical arrangement of the buttons, 
BUT you will need to also change Buttons::m_pMap[] to match.
*********************************************************/

#endif

````

Kenbakuino

Kenbakuino 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Kenbakuino

Kenbakuino 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README