CurrantPi - GitLite

KO | EN

gitlite — search

#javascript #react #llm #android #rust #linux #macos #windows #cli #kubernetes #pytorch #ios #mcp #openai

CurrantPi

(★ 233)

Keep an eye on your Raspberry Pi with zero configuration

파일 탐색기

최종 버전 다운로드 (.zip)

- - BannerView.php
- - FooterData.php
  - FooterView.php
- - HardwareData.php
  - HardwareView.php
- - HeaderView.php
- - LoadAverageData.php
  - LoadAverageView.php
- - MemoryData.php
  - MemoryView.php
- - NetworkData.php
  - NetworkView.php
- - StorageData.php
  - StorageView.php
- - fontello.eot
  - fontello.svg
  - fontello.ttf
  - fontello.woff
  - open-sans.woff2
  - varela-round.woff2
- bootstrap.min.css
- custom.css
- fontello.css
- fonts.css
- Raspberry_Pi_Logo.svg
- CurrantModule.php
- StringHelpers.php
- transfer_rate.sh
api.php
CONTRIBUTING.md
CREDITS.md
favicon.ico
index.php
README.md

# 설치 가이드

1. 코드 내려받기

git clone https://github.com/ColinWaddell/CurrantPi

깃허브에서 프로젝트 코드 전체를 내 컴퓨터로 내려받습니다.

cd CurrantPi

방금 내려받은 프로젝트 폴더 안으로 이동합니다.

2. 공식 설치 스크립트

쉬움 추천

사전 준비물

APT (Debian/Ubuntu 계열) Debian/Ubuntu 계열 리눅스에 기본 내장된 패키지 매니저입니다.

sudo apt-get install lighttpd php7.0-cgi

APT 패키지 저장소에서 바로 설치합니다 (Debian/Ubuntu 계열).

✅ 설치 후 새 터미널을 열고, 프로그램의 버전 확인 명령(예: --version)으로 정상 설치됐는지 확인하세요.

이 레포의 README에 적힌 실제 명령어를 그대로 가져왔습니다.

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

Currant Pi
=========
Keep an eye on your [Raspberry Pi](https://www.raspberrypi.org/) with zero configuration <sup><sup>[\[if you've already got a web-server running\]](#installation)</sup></sup>

Currant Pi will show you current information about your Raspberry Pi's:

* Board temperature
 * Network status
 * Uptime
 * CPU Load
 * Memory allocation
 * Available storage

[Check out the Live Demo &rarr;](http://currantpi.colinwaddell.com/demo)

<a href="http://currantpi.colinwaddell.com/demo">
  <img src="https://raw.githubusercontent.com/ColinWaddell/CurrantPi/screenshots/img/screenshot.png" width="380"/>
</a>

<hr />

Installation
================================
Currant Pi is a web interface to keep an eye on your Raspberry Pi and  is designed to work straight out the box. To install you need to download the latest release either as a zip file, or by cloning the repo and then making it visible to your webserver.

There's a couple of routes to installing this. Follow the one which fits you best.

#### Method \#1: I've already got a webserver and I'm comfortable using Git
1. Clone this repo somewhere your webserver can see it, i.e.:

````
    git clone git@github.com:ColinWaddell/CurrantPi.git /var/www/html/currantpi
    ````
2. Cross Fingers.
3. Point your browser at your webserver.

#### Method \#2: I've already got a webserver and I can easily drop some files into its working directory
1. [Download the latest release](https://github.com/ColinWaddell/CurrantPi/archive/master.zip)
2. Unzip the repository and move its contents to your web-root, or where ever you'd like this to live (i.e. ```/var/www/html/```)
3. Visiting Currant by popping the address of your Raspberry Pi into a web-browser (i.e. [http://raspberrypi](http://raspberrypi))

#### Method \#3: I have no webserver and need full instructions
In the following instructions you can skip step ```1``` if you already have a webserver running. Please just swap out ```/var/www/html``` in the instructions with where you'd like Currant to live on your server. You can skip step ```2``` if you've no interest in creating a backup of your current web server's content.

Just copy and paste each section into a terminal on your Rasbberry Pi and hit enter. You may be asked for a password depending on your configuration.

1. First you'll need to have a webserver up and running on your Pi. The following will install and setup lighttp on your Raspberry Pi. I'm assuming you're running an installation which uses the ```apt``` distro system.
    ```
    sudo apt-get install lighttpd php7.0-cgi
    sudo lighttpd-enable-mod fastcgi fastcgi-php
    sudo service lighttpd force-reload
    ```

2. Next create a backup of your webserver's current content

```
    sudo mv /var/www/html /var/www/html_backup
    sudo mkdir /var/www/html
    ```

3. Install Currant.

```
    cd /tmp/
    wget https://github.com/ColinWaddell/CurrantPi/archive/master.zip -O temp.zip
    unzip temp.zip
    rm temp.zip
    sudo cp -r /tmp/CurrantPi-master/* /var/www/html/
    rm -rf /tmp/CurrantPi-master
    ```
4. Visiting Currant by popping the address of your Raspberry Pi into a web-browser (i.e. [http://raspberrypi](http://raspberrypi))

<hr />

Monitoring a wireless connection
================================
If you'd prefer to get network data back for your wireless connection rather than your ethernet, open up ```content/network/NetworkData.php``` and change the property ```$interface``` as follows:

public $interface = 'wlan0';

API
===
You can get all the information about your Raspberry Pi in the form of a JSON request. This allows CurrantPi to be used to supply data to any external service or your own web application by accessing ```api.php``` instead of ```index.php```

* [http://raspberrypi/api.php](http://raspberrypi/api.php)

If you only want data for a specific module then append it to the request:

* [http://raspberrypi/api.php?memory](http://raspberrypi/api.php?memory)
 * [http://raspberrypi/api.php?memory,load_average](http://raspberrypi?api.php/memory,load_average)

Available modules are:
 * ```footer```
 * ```hardware```
 * ```load_average```
 * ```memory```
 * ```network```
 * ```storage```

Contributing
============
You can contribute to this project by [pushing to your fork and submitting a pull request](https://guides.github.com/activities/contributing-to-open-source/).

I like to try and comment on pull requests as soon as possible, but sometimes real-life gets in the way. I also may suggest some changes or improvements or alternatives. My apologies in advance if I don't automatically accept your submission.

When contributing to CurrantPi keep in mind that the target audience wants to unpack the repo and have it 'just work'. Second to this I'd like the code to feel accessible enough that anyone interested can play with it. People new to programming shouldn't have to deal with fancy design patterns and abstractions. I'd like to keep the code simple *but not stupid*, clean and as readable as possible.

**Code should be simple enough that any eager beginner can follow it.**

<hr />

License
=======
<p>&copy; 2018 <a href="http://colinwaddell.com/">Colin Waddell</a> under the terms of the<a href="https://opensource.org/licenses/MIT"> MIT License.</a>