KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#dsh #dsh-plugin #ai-agent #developer-tools #codex #typescript #cli #deepseek-harness #claude-code #ai-agents #mcp #rust

voron-bedpan

★ 78 Open GitHub ↗

A central purge bucket, wago mount, and cover plate for the Voron 2.4

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Voron Bedpan
A central purge bucket, wago mount, and cover plate for the Voron 2.4

I created this mod because I switched to using the Euclid probe with a bed mount. I wanted to have a purge bucket but the existing purge bucket mod mounts over the extrusion and I wanted something in the center. I also wanted to use wago mounts, so I decided to combine the bucket mounting and the wago mount. The magnets and the cover are just for convenience and aesthetics.

![alt text](https://media.giphy.com/media/ICmAGDLUbcVwk3xE4B/giphy-downsized.gif)

Printing
* No supports needed
* No special orientation or settings

BOM
* 4x M3x8 socket head bolts for the wago mount
* 4x 10x5x3 magnets for the top of the wago mount and cover top/bottom
* 4x 6x3 magnets for the bucket and wago mount sides

Note
* I am small brain unga bunga (this is my first mod)
* I am voron noob (nothing has been tested properly)
* How do you set up the config to work with the purge bucket mod macros? I don't know. I'll figure it out.

Credits
* Wago mount (the part where the wagos clip in) was based on https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/deepfriedheroin/v2_bed_wagos
* The Bedpan name was kindly donated by Logan#2225

voron-bedpan

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README