AMDMIGraphX

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 323)

AMD's graph optimization engine.

AMDMIGraphX 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# AMD MIGraphX

AMD MIGraphX is AMD's graph inference engine, which accelerates machine learning model inference.

>[!NOTE]
>The published documentation is available at [MIGraphX](https://rocm.docs.amd.com/projects/AMDMIGraphX/en/latest/) in an organized, easy-to-read format, with search and a table of contents. The documentation source files reside in the `docs` folder of this repository. As with all ROCm projects, the documentation is open source. For more information on contributing to the documentation, see [Contribute to ROCm documentation](https://rocm.docs.amd.com/en/latest/contribute/contributing.html).

> [!NOTE]
> You must [install ROCm](https://rocm.docs.amd.com/projects/install-on-linux/en/latest/index.html) before
> installing MIGraphX.

## Installing from binaries

Install binaries using:

```bash
sudo apt update && sudo apt install -y migraphx
```

Header files and libraries are installed under ``/opt/rocm-<version>``, where ``<version>`` is the ROCm
version.

## Building from source

You have three options for building from source:

* [ROCm build tool](#compile-using-the-rocm-build-tool-rbuild): Uses
  [rbuild](https://github.com/RadeonOpenCompute/rbuild) to install prerequisites, then you can build
  the libraries with a single command.

* [CMake](#use-cmake-to-build-migraphx): Uses a script to install prerequisites, then you can use
  CMake to build the source.

* [Docker](#use-docker): Builds a Docker image with all prerequisites installed, then you can build the
  MIGraphX sources inside a Docker container.

### Build prerequisites

The following is a list of prerequisites for building MIGraphX.

* [ROCm CMake modules](https://github.com/RadeonOpenCompute/rocm-cmake) **required**
* [MIOpen](https://github.com/ROCmSoftwarePlatform/MIOpen) for running on the GPU
* [rocBLAS](https://github.com/ROCmSoftwarePlatform/rocBLAS) for running on the GPU
* [HIP](https://github.com/ROCm-Developer-Tools/HIP) for running on the GPU
* [Protobuf](https://github.com/google/protobuf) for reading [onnx](https://github.com/onnx/onnx)
  files
* [Half](http://half.sourceforge.net/), an IEEE 754-based half-precision floating point library
* [pybind11](https://pybind11.readthedocs.io/en/stable/) for python bindings
* [JSON](https://github.com/nlohmann/json) for model serialization to json string format
* [MessagePack](https://msgpack.org/index.html) for model serialization to binary format
* [SQLite3](https://www.sqlite.org/index.html) to create database of kernels' tuning information or run queries on existing database

### Installing the ROCm build tool [rbuild](https://github.com/RadeonOpenCompute/rbuild).

1. Install `rocm-cmake`, `pip3`, `rocblas`, and `miopen-hip`:

```bash
    sudo apt install -y rocm-cmake python3-pip rocblas miopen-hip
    ```

2. Set up and activate python venv for rbuild:
    ```bash
    python3 -m venv venv_rbuild
    source venv_rbuild/bin/activate
    ```

3. Install [rbuild](https://github.com/RadeonOpenCompute/rbuild) in the python venv:

```bash
    pip install https://github.com/RadeonOpenCompute/rbuild/archive/master.tar.gz
    ```

> [!NOTE]
> You can deactivate the python virtual environment with `deactivate`.

### Compile using the ROCm build tool [rbuild](https://github.com/RadeonOpenCompute/rbuild).

1. Follow instructions in [installing rbuild](#installing-the-rocm-build-tool-rbuild)

2. Build MIGraphX source code:

```bash
    rbuild build -d depend -B build -DGPU_TARGETS=$(/opt/rocm/bin/rocminfo | grep -o -m1 'gfx.*')
    ```

Once completed, all prerequisites are in the `depend` folder and MIGraphX is in the `build` directory.

> [!NOTE]
> If you get an `rbuild: command not found` error, it's because `rbuild` is installed in `$HOME/.local/bin`,
> which is not in `PATH`. You can either export PATH as `export PATH=$HOME/.local/bin:$PATH` to add
> the folder to `PATH`, or add the option `--prefix /usr/local` in the pip3 command when installing `rbuild`.

### Use CMake to build MIGraphX

1. Follow instructions in [installing rbuild](#installing-the-rocm-build-tool)

2. Install the prerequisites:

```bash
    rbuild prepare -d depend
    ```

This puts all the prerequisites are in `depend` the folder. They can be used in the `cmake`
    configuration as `-DCMAKE_PREFIX_PATH=depend`.

If you have sudo access, as an alternative to the `rbuild` command, you can install the prerequisites
    in the same way as a Dockerfile, by calling `./tools/install_prereqs.sh`.

By default, all prerequisites are installed at the default location (`/usr/local`) and are accessible by all
    users. For the default location, `sudo` is required to run the script. You can also specify a different
    location using `./tools/install_prereqs.sh $custom_location`.

3. Go to the project folder and create a `build` directory:

```bash
    mkdir build
    cd build
    ```

4. Configure CMake. If the prerequisites are installed at the default location `/usr/local`, use:

```bash
    CXX=/opt/rocm/llvm/bin/clang++ cmake .. -DGPU_TARGETS=$(/opt/rocm/bin/rocminfo | grep -o -m1 'gfx.*')
    ```

Otherwise, you need to set `-DCMAKE_PREFIX_PATH=$your_loc` to configure CMake.

The default build type is `Release`. To build MIGraphX in debug mode, pass
    `-DCMAKE_BUILD_TYPE=Debug` when configuring CMake:

```bash
    CXX=/opt/rocm/llvm/bin/clang++ cmake .. \
        -DCMAKE_BUILD_TYPE=Debug \
        -DGPU_TARGETS=$(/opt/rocm/bin/rocminfo | grep -o -m1 'gfx.*')
    ```

For optimized binaries with debug symbols, use `-DCMAKE_BUILD_TYPE=RelWithDebInfo`.

5. Build MIGraphX source code:

```cpp
    make -j$(nproc)
    ```

You can verify this using:

```cpp
    make -j$(nproc) check
    ```

6. Install MIGraphX libraries:

```cpp
    make install
    ```

### Use Docker

The easiest way to set up the development environment is to use Docker. ROCm's
underlying drivers and libraries, known as "TheRock", now support multi-arch
packaging, meaning it only installs device-code packages for the GPU architecture
present on the system. Setting `GPU_ARCH` reduces the image size; leaving it
unset installs device code for all supported architectures, which is useful when
the same Docker image needs to run on different ROCm-supported GPUs.

1. With the Dockerfile, build a Docker image:

```bash
        docker build -t migraphx .
    ```

```bash
        docker build -t migraphx --build-arg GPU_ARCH=$(rocminfo | grep -o -m1 'gfx.*') .
    ```

2. Enter the development environment using `docker run`:

```bash
        docker run --device='/dev/kfd' --device='/dev/dri' -v=`pwd`:/code/AMDMIGraphX -w /code/AMDMIGraphX --group-add video -it migraphx
    ```

3. In the Docker container, all required prerequisites are already installed, so you can go to the folder
    `/code/AMDMIGraphX` and follow the steps (starting from 2) in the
    [Use CMake to build MIGraphX](#use-cmake-to-build-migraphx).

## Using the MIGraphX Python module

To use MIGraphX's Python module, you can set `PYTHONPATH` or use the `.deb` package:

* Setting `PYTHONPATH`:

```bash
    export PYTHONPATH=/opt/rocm/lib:$PYTHONPATH
    ```

* Creating the `deb` package:

```bash
    make package
    ```

This provides the path for .deb package.

To install:

```bash
    dpkg -i <path_to_deb_file>
    ```

## Calling MIGraphX APIs

To use MIGraphX's C/C++ API in your CMake project, you must set `CMAKE_PREFIX_PATH` to the
MIGraphX installation location and run:

```cmake
find_package(migraphx)
target_link_libraries(myApp migraphx::c)
```

Where `myApp` is the CMake target in your project.

## Other Dockerfiles

The default `Dockerfile` builds against ROCm 7.13 and newer using TheRock
(`amdrocm-*`) packages.  To build against ROCm 7.2.x and older, use the legacy
dockerfile instead:

```bash
docker build -t migraphx:legacy -f tools/docker/legacy.dockerfile .
```

Alternative Dockerfiles are available under `tools/docker/`:

* `tools/docker/legacy.dockerfile` — ROCm 7.2.x and older (Ubuntu 22.04); use this when building against ROCm releases that predate TheRock packages
* `tools/docker/ubuntu_2404.dockerfile` — Ubuntu 24.04 with ROCm 7.1.1
* `tools/docker/ubuntu_2204.dockerfile` — Ubuntu 22.04 with ROCm 6.4.2

To build with one of these, use the `-f` flag. For example:

```bash
docker build -t migraphx:2404 -f tools/docker/ubuntu_2404.dockerfile .
```

Then follow the same `docker run` and build steps described in the
[Use Docker](#use-docker) section.

## Building for development

Using `rbuild`, you can install the dependencies for development with:

```bash
rbuild develop -DGPU_TARGETS=$(/opt/rocm/bin/rocminfo | grep -o -m1 'gfx.*')
```

This installs development dependencies in the `deps` directory and configures `cmake` to use those
dependencies in the `build` directory. You can change these directories by passing the `--deps-dir` and
`--build-dir` flags to the `rbuild` command:

```bash
rbuild develop --build-dir build_rocm_55 --deps-dir /home/user/deps_dir
```

## Building the documentation

HTML and PDF documentation can be built using:

`cmake --build . --config Release --target doc` **OR** `make doc`

This will build a local searchable web site inside the docs/html folder.

Documentation is built using [Doxygen](http://www.stack.nl/~dimitri/doxygen/download.html) and [rocm-docs-core](https://github.com/RadeonOpenCompute/rocm-docs-core)

Run the steps below to build documentation locally. You can reuse the same venv from [installing rbuild](#installing-the-rocm-build-tool-rbuild).

```bash
cd docs

pip3 install -r sphinx/requirements.txt

python3 -m sphinx -T -E -b html -d _build/doctrees -D language=en . _build/html
```

Depending on your setup `sudo` may be required for the pip install.

## Formatting the code

All the code is formatted using clang-format. To format a file, use:

```clang
clang-format-10 -style=file -i <path-to-source-file>
```

Also, githooks can be installed to format the code per-commit:

```bash
./.githooks/install
```

## AI Tool Use Policy

Follow the [LLVM AI Tool Use Policy](https://llvm.org/docs/AIToolPolicy.html) for contributions that use AI.

AMDMIGraphX

AMDMIGraphX 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

AMDMIGraphX

AMDMIGraphX 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README