Arduino-Diseqc-solar-tracker

KO | EN

gitlite — search

#python #react #typescript #llm #android #rust #linux #docker #macos #awesome #cli #kubernetes #awesome-list #mcp

Arduino-Diseqc-solar-tracker

(★ 30)

uses an arduino to control a DiSEqC 1.2 satellite motor to track the Sun in right ascension

Arduino-Diseqc-solar-tracker 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

Arduino-Diseqc-solar-tracker
============================

callisto_drive uses an arduino to control a DiSEqC 1.2 satellite motor so
an antenna can track the Sun in right ascension.
The arduino calculates the position of the Sun and sends tone controls to
the drive via pin 8. External electronics are required to inject the tone
signals onto the drive power lines.

Single-precision arithmetic limits the angular precision. A comparison with the JPL Horizons
system show discrete errors of up to 1 minute in hour angle without the lookup tables.
With the tables the errors are less (not checked how much less!)

22 kHz signal should be set to 650 mV p-p

see position_app_note_v1.pdf in https://www.eutelsat.com/files/PDF/DiSEqC-documentation.zip
but note these notes are incomplete.

Set the time at the serial console (9600 baud) with the format "yyyy mm dd hh mm ss".

Version 1.1 includes code to mitigate the 2020 GPS rollover bug, for receiver modules that are subject to it (like ours!).

Graham Woan

Arduino-Diseqc-solar-tracker

Arduino-Diseqc-solar-tracker 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Arduino-Diseqc-solar-tracker

Arduino-Diseqc-solar-tracker 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README