Arduino-pIPv6Stack

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

Arduino-pIPv6Stack

(★ 47)

Very light IPv6 stack for Arduino UNO and Xbee based on Contiki OS network stack

Arduino-pIPv6Stack 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

Arduino pico IPv6 stack
=======================

A very light IPv6 stack for [Arduinos](http://www.arduino.cc/) UNO and [Xbee](http://www.digi.com/en/products/wireless/point-multipoint/xbee-series1-module) 
based on [Contiki OS](http://www.contiki-os.org/) network stack.

If you are using our [Arduino µIPv6 stack](https://github.com/telecombretagne/Arduino-IPv6Stack/), you're
probably wondering why we created a lighter stack ?
Because Arduino UNO has to be IPv6 ready too ! With this stack, you'll be able to join a 6LoWPAN network using
Arduinos UNO (which only have 2kB of RAM).
With pIPv6 stack, we reduced RPL and CoAP functionnalities to keep an ultra small memory footprint ( **pIPv6** acronym
stands for " **p**ico **I**nternet **P**rotocol **v**ersion **6**").

![Arduino pIPv6 Stack](http://departements.telecom-bretagne.eu/data/rsm/pIPv6%20stack%20diagram.png)

Features
--------

* IP network stack with low-power standards : [6LoWPAN](http://datatracker.ietf.org/wg/6lowpan/charter/), reduced [RPL](http://tools.ietf.org/html/rfc6550), and [CoAP](http://datatracker.ietf.org/doc/draft-ietf-core-coap/)
* Compatible with all [Arduino](http://arduino.cc/en/Main/Products) boards 
* Based on [Contiki OS](http://www.contiki-os.org/) network stack
* Can be used on top of [IEEE 802.15.4](http://www.digi.com/products/wireless-wired-embedded-solutions/zigbee-rf-modules/point-multipoint-rfmodules/xbee-series1-module), IEEE 802.3 (Ethernet), IEEE 802.11 (Wifi) MAC layers *

*: We are only providing [XBee Series 1](http://www.digi.com/products/wireless-wired-embedded-solutions/zigbee-rf-modules/point-multipoint-rfmodules/xbee-series1-module) interface for now.

Get Started
-----------

To get started using pIPv6 stack, go to the [wiki](https://github.com/telecombretagne/Arduino-pIPv6Stack/wiki). The wiki
contains a step-by-step tutorial and examples necessary to build your first Arduino UNO Wireless Sensor Network.

![Arduino WSN](http://departements.telecom-bretagne.eu/data/rsm/heterogeneous%20wsn%20arch.png)

License
-------
 
This stack is open source software : it can be freely used both in commercial and non-commercial systems and the full source code is available.

People
-------
[Renzo Navas](renzo.navas@telecom-bretagne.eu) (Télecom Bretagne, RSM dpt) : *project maintainer*

[Baptiste Gaultier](baptiste.gaultier@telecom-bretagne.eu) (Télecom Bretagne, RSM dpt) : *developer and documentation maintainer*

[Laurent Toutain](Laurent.Toutain@telecom-bretagne.eu) (Télecom Bretagne, RSM dpt) : *associate professor and project lead*

Arduino-pIPv6Stack

Arduino-pIPv6Stack 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Arduino-pIPv6Stack

Arduino-pIPv6Stack 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README