libm17

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #typescript #llm #android #machine-learning #nodejs #vue #awesome-list #mcp #openai #open-source

(★ 28)

M17 C library

libm17 Latest Version Download

Download Latest Version (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# libm17

### Overview
**Libm17** is a C implementation of the [M17 protocol's](https://en.wikipedia.org/wiki/M17_(amateur_radio)) RF stack, as described by its [specification document](https://spec.m17project.org).

The library includes:
- soft symbol slicer (RX) and symbol mapper (TX),
- convolutional encoder with soft Viterbi decoder (utilizing fixed point arithmetic),
- Golay encoder with soft decoder (fixed point arithmetic),
- bit interleaver and randomizer,
- cyclic redundancy check (CRC) calculation (LSF/LSD and arbitrary input),
- callsign encoder and decoder,
- LSF/LSD META field extended callsign data, cryptographic nonce, and GNSS position data encoders/decoders,
- Root Raised Cosine (RRC) filter taps (for 24kHz and 48kHz sample rates) - linear and polyphase.

There's no support for **any** encryption within the library - it has to be handled by the developer, using own code.

### Address encoding convention
As per the [specification document](https://github.com/M17-Project/M17_spec), the address space is divided into parts. Encodable callsign space is accessed by using the base40 alphabet. If the first character is set to `#`, the address belongs to the extended hash-address space. The broadcast address is represented by `@ALL`. Zero-address is invalid and decodes into a null-string. The reserved chunk for application use cannot be accessed using any string.

### Legacy Makefile building
1. Build the shared object `libm17.so` by running `make`. 
2. Optionally, the library object can be installed with `make install`.

Unit tests are available and can be compiled and run with `make test && make testrun`.

### Cmake building
1. Configure the build - run `cmake -B build` to get default options. 
2. Build the library by running `cmake --build build`. 
3. At this point tests can be run by doing any of: 
* `cmake --build build --target test` 
* `ctest --test-dir build` 
* `./build/unit_tests/unit_tests`
4. Finally, installation is just `sudo cmake --install build`

### Unit tests
Unit tests use the [Unity](https://github.com/ThrowTheSwitch/Unity) unit testing framework.

libm17

libm17 Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

libm17

libm17 Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

Download README