hx711-rpi-py

KO | EN

gitlite — search

#javascript #typescript #go #android #machine-learning #rust #linux #java #nodejs #cli #pytorch #mcp #ios #open-source

(★ 17)

Python bindings for Raspberry Pi HX711 C++ Library

hx711-rpi-py 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Raspberry Pi HX711 Python Bindings

[![Upload to PyPI](https://github.com/endail/hx711-rpi-py/actions/workflows/build_and_upload.yml/badge.svg)](https://github.com/endail/hx711-rpi-py/actions/workflows/build_and_upload.yml) [![Downloads](https://pepy.tech/badge/hx711-rpi-py)](https://pepy.tech/project/hx711-rpi-py)

Python bindings for [Raspberry Pi HX711 C++ Library](https://github.com/endail/hx711)

- Use with Raspberry Pi
- Read from a HX711 using Python
- Code tested inside [virtual Raspberry Pi Zero/3/4 environments](.github/workflows/build_and_upload.yml) on GitHub and builds automatically uploaded to PyPI
- This repo automatically rebuilds when the C++ library is updated

## Sample Output

![hx711.gif](https://raw.githubusercontent.com/endail/hx711-rpi-py/master/hx711.gif)

The .gif above illustrates the output of a [simple Python script](src/test.py) on a Raspberry Pi Zero W where the HX711 chip was operating at 80Hz. In this example, each time the `.weight` function is called the median of three samples was used to calculate the weight in grams.

## Examples

```python
from HX711 import *

# create a SimpleHX711 object using GPIO pin 2 as the data pin,
# GPIO pin 3 as the clock pin, -370 as the reference unit, and
# -367471 as the offset
with SimpleHX711(2, 3, -370, -367471) as hx:

# set the scale to output weights in ounces
  hx.setUnit(Mass.Unit.OZ)

# zero the scale
  hx.zero()

# constantly output weights using the median of 35 samples
  while True:
    print(hx.weight(35)) #eg. 1.08 oz
```

### Alternative Syntax (w/out `with`)

```python
from HX711 import *

hx = SimpleHX711(2, 3, -370, -367471)
hx.setUnit(Mass.Unit.OZ)
hx.zero()
while True:
  print(hx.weight(35))
```

Keep in mind that calling `.weight()` will return a `Mass` object, but you can do the following:

```python
# set the scale to output weights in ounces
hx.setUnit(Mass.Unit.OZ)

# obtain a median reading from 35 samples as a Mass object in ounces
m = hx.weight(35)

# number in ounces
num = float(m) # eg. 1.08

# string representation of the Mass
s = str(m) # eg. 1.08 oz

# print the Mass object
print(m) # eg. 1.08 oz

# change the unit to grams
m.setUnit(Mass.Unit.G)
grams_as_str = str(m) # eg. 30.62 g

# or obtain a new Mass object
m2 = m.convertTo(Mass.Unit.KG)
kgs_as_str = str(m2) # eg. 0.031 kg
```

The list of different `Mass.Unit`s can be viewed [here](https://github.com/endail/hx711#mass).

### Time-Based Sampling

You can use [`datetime.timedelta`](https://docs.python.org/3/library/datetime.html#timedelta-objects) to obtain as many samples as possible within the time period.

```python
from HX711 import *
from datetime import timedelta

with SimpleHX711(2, 3, -370, -367471) as hx:
  while True:
    # eg. obtain as many samples as possible within 1 second
    print(hx.weight(timedelta(seconds=1)))
```

### Options

`.weight()`, `.zero()`, and `.read()` can all take an `Options` parameter. You can use this to fine tune how you want the scale to behave.

```python

# zero the scale by using the average value of all samples obtained within 1 second
hx.zero(Options(
  timedelta(seconds=1),
  ReadType.Average))

# obtain a raw value from the scale using the median of 100 samples
num = hx.read(Options(
  100,
  ReadType.Median))

# obtain a Mass object using the median of three samples
# all four statements below are equivalent
m = hx.weight()
m = hx.weight(3)
m = hx.weight(Options())
m = hx.weight(Options(
  3,
  ReadType.Median))

# Options can also be created separately
opts = Options()
opts.timeout = timedelta(seconds=5)
opts.stratType = StrategyType.Time
m = hx.weight(opts)
```

## Install

1. Install [libhx711](https://github.com/endail/hx711)

2. `pip3 install --upgrade hx711-rpi-py`

## Calibrate

There is a Python script in the `src` directory you can use to calibrate your load cell and obtain the reference unit and offset values referred to above. The simplest way to use it after installing `hx711-rpi-py` is as follows:

```console
pi@raspberrypi:~ $ wget https://raw.githubusercontent.com/endail/hx711-rpi-py/master/src/calibrate.py
pi@raspberrypi:~ $ python3 calibrate.py [data pin] [clock pin]
```

Substitute `[data pin]` and `[clock pin]` with the [GPIO pin numbers](https://pinout.xyz/) which are connected to the HX711's data pin and clock pin, respectively.

## Documentation

As the Python code relies upon the [underlying C++ library](https://github.com/endail/hx711#documentation), the documentation is identical. However, not all of the code is exposed to Python. You can check precisely which functionality is accessible through Python in the [bindings.cpp file](src/bindings.cpp).

hx711-rpi-py

hx711-rpi-py 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

hx711-rpi-py

hx711-rpi-py 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README