KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#dsh #dsh-plugin #typescript #ai-agent #developer-tools #claude-code #codex #deepseek-harness #ai-agents #react #mcp #rust

dotfiles

★ 58 Open GitHub ↗

My ultimate *NIX dotfiles: a finely-tuned setup for a minimal yet powerful desktop experience. It's been designed around i3wm and URxvt for a cohesive and efficient workflow.

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# ~/dotfiles for Debian 13 and i3

![screenshot01](https://github.com/gerardbm/dotfiles/blob/master/images/Cosmic-Lunar-Mode.png)

![screenshot02](https://github.com/gerardbm/dotfiles/blob/master/images/Cosmic-Solar-Mode.png)

This repository uses **stow** hierarchy: clone it into `$HOME` and use `stow --no-folding <package>` to create the symlinks automatically for each package. For more information about stow read its documentation: `stow(8)`.

Color schemes and vim/neovim files are not into this repository. Find them into:

- Color schemes: [cosmic](https://github.com/gerardbm/cosmic)
- Vim/neovim: [vimrc](https://github.com/gerardbm/vimrc)

Configuration files:

```
- Distro      : Debian 13
- WM          : i3
- Menu        : rofi
- Shell       : zsh
- Terminal    : urxvt, xterm
- Multiplexer : tmux
- Font        : Noto Mono
- CVS         : git
- Editor      : vim, neovim
- Files       : vifm, ranger
- Finder      : fzf
- IRC         : irssi
- Email       : mutt
- Music       : cmus
- Video       : mpv
- Images      : feh
- PDF reader  : mupdf, apvlv, zathura
- Epub reader : ebook-viewer, fbreader
- Browser     : w3m, qutebrowser
- Interface   : surfraw
- Bittorrent  : transmission-cli
```

## Setup

### Debian

**Add the user to the sudoers file**

1. Enter to the root mode: `su -` (then, root password)

2. Edit the file `/etc/sudoers`:

`sudo visudo -f /etc/sudoers`

3. Add this line after `ROOT ALL (ALL:ALL) ALL`:

`<user> ALL (ALL:ALL) ALL`

**Disable autologin on LXDE**:

1. Edit the following file:

`sudo nano /etc/lightdm/lightdm.conf`

2. Find the line `#autologin-user=`.

3. Uncomment the line and add the user:

`autologin-user=<user>`

### i3

Install it from the repositories:

`sudo apt-get install i3`

Make sure you have installed the following libraries, which are a requirement to run my setup properly:

- picom: a lightweight compositor for X11 with animation support.
- dunst: a customizable and lightweight notification-daemon.
- libnotify-bin: a program to send desktop notifications.
- lxappearance: customize look and feel (lxde-native).
- lxpolkit: authorization manager for the desktop.
- lxqt-openssh-askpass: handle password access.
- pulseaudio-utils: to run pulse audio controls from the keyboard.
- rofi: a window switcher, run dialog and dmenu replacement.
- rxvt-unicode: VT102 emulator for the X window system.
- udiskie: automounter for removable media (flash drives).
- volumeicon-alsa: volume icon for the system tray.
- blueman: bluetooth devices manager (blueman-applet included).
- brightnessctl: read and control the device brightness.
- xsel: command-line tool to manipulate the X selection.
- xsct: set screen color temperature.
- xcalib: tiny monitor calibration loader.
- moreutils: additional Unix utilities.
- silversearcher-ag: a very fast grep-like program.
- fzf: a command line fuzzy-finde for general purpose.

Optional:
- arandr: can be useful to generate xrandr \*.sh scripts.
- redshift: adjusts the color temperature of your screen according to your surroundings. This may help your eyes hurt less or reduce the risk for delayed sleep phase syndrome if you are working in front of the screen at night.
- xdotool: simulate X11 input events for mouse and keyboard.

Useful tools: uuid, fbreader, simplescreenrecorder, trash-cli

### Zsh

Install it from the repositories:

`sudo apt-get install zsh`

Install [Oh My Zsh](https://github.com/robbyrussell/oh-my-zsh) following the instructions from its page.

Via curl:

`sh -c "$(curl -fsSL https://raw.githubusercontent.com/robbyrussell/oh-my-zsh/master/tools/install.sh)"`

Via wget:

`sh -c "$(wget https://raw.githubusercontent.com/robbyrussell/oh-my-zsh/master/tools/install.sh -O -)"`

Atomic theme must be downloaded from [Atomic repository](https://github.com/gerardbm/atomic).

Enable zsh-syntax-highlighting:

`git clone https://github.com/zsh-users/zsh-syntax-highlighting $HOME/.syntax`

Enable zsh-autosuggestions:

`git clone https://github.com/zsh-users/zsh-autosuggestions ~/.zsh/zsh-autosuggestions`

Symlink the zsh settings:

`cd $HOME/dotfiles && stow --no-folding zsh`

Change the current shell:

`$ chsh -s /usr/bin/zsh`

Log out and log in to see the new shell as default.

### URxvt

In Debian 13, I do not install rxvt-unicode from the official repositories. The packaged version is 9.31, but I deliberately use version 9.30 instead.

The reason is a regression introduced after 9.30 that affects how urxvt handles window resizing at startup and during geometry changes. With tiling window managers such as i3, this causes the shell prompt to appear vertically offset (centered or pushed down) when the terminal is opened maximized or resized, instead of starting at the top of the window.

First of all, install the following dependencies:

```bash
sudo apt-get install libptytty-dev libperl-dev
```

Then, clone the repository and compile it:

```bash
git clone https://github.com/exg/rxvt-unicode.git
cd rxvt-unicode
git checkout rxvt-unicode-9.30
git submodule update --init

./configure \
  --prefix=/usr \
  --enable-256-color \
  --enable-unicode3 \
  --enable-perl \
  --enable-font-styles

wget http://dist.schmorp.de/libev/libev-4.33.tar.gz
tar xf libev-4.33.tar.gz
mv libev-4.33 libev

make
sudo make install
```

It was required to place `libev-4.33` as «libev» in the same folder before the `make`. Then, the command `checkinstall` failed. Use `sudo make install`.

Symlink the rxvt-unicode settings:

`cd $HOME/dotfiles && stow --no-folding X11`

Cosmic color scheme is already included.

Install the scripts:

`cd $HOME/dotfiles && stow --no-folding urxvt`

To check for newer versions on Github:

- The script `resize-font`: https://github.com/simmel/urxvt-resize-font
- The script `url-select`: https://github.com/johntyree/urxvt-perls
- The script `clipboard`: https://github.com/pkkolos/urxvt-scripts
- The script `unichr`: https://emergent.unpythonic.net/

### Tmux

Install it from the repositories:

`sudo apt-get install tmux`

Then, install the package `urlview`:

`sudo apt-get install urlview`

Symlink the tmux settings:

`cd $HOME/dotfiles && stow --no-folding tmux`

### Git

Install it from the repositories:

`sudo apt-get install git`

Symlink the git settings:

`cd $HOME/dotfiles && stow --no-folding git`

### Powerline

Clone the [Powerline fonts repository](https://github.com/powerline/fonts):

`git clone https://github.com/powerline/fonts`

And install it:

`cd fonts && ./install.sh`.

**Fontconfig**

«In some distributions (e.g. Debian), Terminess Powerline is ignored by default and must be explicitly allowed. A fontconfig file is provided which enables it. Copy this file from the fontconfig directory to your home folder under ~/.config/fontconfig/conf.d (create it if it doesn't exist) and re-run `fc-cache -vf`». Paragraph extracted from [Powerline](https://github.com/powerline/fonts).

### FontAwesome

Install it from the repositories:

`sudo apt-get install fonts-font-awesome`

(Not using anymore, though).

### Vim 9

Install it from the repositories:

`sudo apt-get install vim vim-gtk3`

The package `vim-gtk3` adds the 'huge version' with a lot of features (+python3, +clipboard...), and the GTK3 GUI.

Install the plugins manager [vim-plug](https://github.com/junegunn/vim-plug); follow the instructions from its repository:

```sh
curl -fLo ~/.vim/autoload/plug.vim --create-dirs \
    https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim
 ```

Install the plugins with the command:

`:PlugInstall`.

My vim config files are into [vimrc](https://github.com/gerardbm/vimrc).

### Neovim

Install it from the repositories:

`sudo apt-get install neovim`

A desktop file is not needed because it's a terminal application.

Finally, install [vim-plug](https://github.com/junegunn/vim-plug) for neovim using this command:

```sh
curl -fLo ~/.local/share/nvim/site/autoload/plug.vim --create-dirs \
    https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim
```

My neovim config files are into [vimrc](https://github.com/gerardbm/vimrc).

### Pylint

Install pylint from the repositories:

`sudo apt-get install pylint`

Note: check pyenv to install other Python versions.

`sudo pip3 install pylint`

### Vint

Install vint from pip3:

`sudo pip3 install vim-vint`

### Shellcheck

Install shellcheck from the repositories:

`sudo apt-get install shellcheck`

### Chktex

Install chktex from the repositories:

`sudo apt-get install chktex`

### Nodejs, tern, jshint, csslint

Install Node.js from the repositories:

`sudo apt-get install nodejs`

Or download another version from [https://nodejs.org](https://nodejs.org).

Unzip the binary archive (for example: v.10.15.3):

```sh
sudo mkdir /usr/lib/nodejs
sudo tar -xJvf node-v10.15.3-linux-x64.tar.xz -C /usr/lib/nodejs
sudo mv /usr/lib/nodejs/node-v10.15.3-linux-x64 /usr/lib/nodejs/node-v10.15.3
```

Symlink the executables:

```sh
sudo ln -s /usr/lib/nodejs/node-v10.15.3/bin/node /usr/bin/node
sudo ln -s /usr/lib/nodejs/node-v10.15.3/bin/npx /usr/bin/npx
sudo ln -s /usr/lib/nodejs/node-v10.15.3/bin/npm /usr/bin/npm
```

Test the installation using:

```sh
node -v
npm version
```

Make a directory to install global npm modules:

`mkdir ~/.npm-global`

Configure npm to use the new directory path:

`npm config set prefix '~/.npm-global'`

Add the path to `~/.zshrc` file:

`export PATH=~/.npm-global/bin:$PATH`

Update the system variables:

`source ~/.zshrc`

Finally install the packages using npm:

```sh
npm install -g tern
npm install -g jshint
npm install -g csslint
```

### Pyenv

Install the dependencies:

`sudo apt install make build-essential libssl-dev zlib1g-dev libbz2-dev libreadline-dev libsqlite3-dev curl git libncursesw5-dev xz-utils tk-dev libxml2-dev libxmlsec1-dev libffi-dev liblzma-dev`

Install pyenv:

```sh
curl -L https://raw.githubusercontent.com/pyenv/pyenv-installer/master/bin/pyenv-installer | bash
```

Add pyenv to the path:

```sh
echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.zprofile
echo 'export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.zprofile
echo 'eval "$(pyenv init --path)"' >> ~/.zprofile

echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.profile
echo 'export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.profile
echo 'eval "$(pyenv init --path)"' >> ~/.profile

echo 'eval "$(pyenv init -)"' >> ~/.zshrc
```

Install a Python version. For example:

```sh
pyenv install 3.14.0
```

Activate the Python version:

```sh
pyenv local 3.14.0
```

Then use `pip3.14` to install some Python tools.

How to use again the system version:

```sh
pyenv local system
```

How to list all the available versions:

```sh
pyenv versions
```

### Rbenv

Install the dependencies:

`sudo apt install git curl libssl-dev libreadline-dev zlib1g-dev autoconf bison build-essential libyaml-dev libreadline-dev libncurses5-dev libffi-dev libgdbm-dev`

Then install Rbenv:

`curl -fsSL https://github.com/rbenv/rbenv-installer/raw/HEAD/bin/rbenv-installer | bash`

Add Rbenv to the PATH in `~/.zshrc`:

```sh
export PATH="$HOME/.rbenv/bin:$PATH"
eval "$(rbenv init - zsh)"
```

Install the wanted Ruby version:

`rbenv install 3.2.2`

And make it local:

`rbenv local 3.2.2`

### Jekyll

When Rbenv is installed, in a Jekyll project, run:

`bundle install`

Some projects may have a `.ruby-version` file with a specified version.

### Golang

Install golang from the repositories:

`sudo apt-get install golang`

### Hugo

Install hugo from the repositories:

`sudo apt-get install hugo`

You can also install a specific version:

```sh
wget https://github.com/gohugoio/hugo/releases/download/v0.145.0/hugo_extended_0.145.0_linux-amd64.deb
sudo dpkg -i hugo_extended_0.145.0_linux-amd64.deb
```

To delete an another version installed with dpkg:

`sudo dpkg -r hugo`

### Clang

Install clang from the repositories:

`sudo apt-get install clang libclang-dev`

The package `libclang-dev` is required on Debian.

### W3m

Install it from the repositories:

`sudo apt-get install w3m`

Symlink the w3m settings:

`cd $HOME/dotfiles && stow --no-folding w3m`

### Ranger

Install it from the repositories:

`sudo apt-get install ranger`

Symlink the ranger settings:

`cd $HOME/dotfiles && stow --no-folding ranger`

### Vifm

Install it from the repositories:

`sudo apt-get install vifm`

Symlink the vifm settings:

`cd $HOME/dotfiles && stow --no-folding vifm`

Install the atomic theme for vifm:

```sh
mkdir $HOME/.mutt
git clone https://github.com/gerardbm/atomic
cp atomic/vifm/atomic.vifm $HOME/.config/vifm/colors/
```

### FZF

Install it following the instructions from [fzf Github page](https://github.com/junegunn/fzf/).

```sh
git clone --depth 1 https://github.com/junegunn/fzf.git ~/.fzf
~/.fzf/install
```

### Mutt

Install it from the repositories:

`sudo apt-get install mutt`

Copy the mutt settings (no symlink):

`cp $HOME/dotfiles/mutt/.muttrc $HOME/`

Install the atomic theme for mutt:

```sh
mkdir $HOME/.mutt
git clone https://github.com/gerardbm/atomic
cp atomic/mutt/atomic.muttrc $HOME/.mutt
```

### Cmus

Install it from the repositories:

`sudo apt-get install cmus`

Symlink the cmus settings:

`cd $HOME/dotfiles && stow --no-folding cmus`

Install the atomic theme for cmus:

```sh
git clone https://github.com/gerardbm/atomic
cp atomic/cmus/atomic.theme $HOME/.config/cmus
```

From cmus command line:

- Set the colorscheme: `:colorscheme atomic`
- Add the playlist: `:add $HOME/.config/cmus/playlist.pl`

### Irssi

Install it from the repositories:

`sudo apt-get install irssi`

Create the folder first and then copy (no symlink) the irssi settings:

`mkdir $HOME/.irssi && cp $HOME/dotfiles/irssi/.irssi/config $HOME/.irssi/`

Copy the script to install the plugins for the first time:

`cp $HOME/dotfiles/irssi/.irssi/config $HOME/.irssi/`

Run it:

`. ./iip.sh`

### Less

Less configuration is into a binary file called `$HOME/.less`.

Compile the file `$HOME/.lesskey` with `lesskey` command to generate it.

Sources: https://www.systutorials.com/docs/linux/man/1-lesskey/#lbAE

### Youtube-dl

Install it using wget:

`sudo wget -O /usr/local/bin/yt-dlp https://github.com/yt-dlp/yt-dlp/releases/latest/download/yt-dlp_linux`

Give permissions:

`sudo chmod a+rx /usr/local/bin/yt-dlp`

Update it to the last version:

`sudo yt-dlp -U`

### Translate-shell

Install it from git:

```bash
git clone https://github.com/soimort/translate-shell
cd translate-shell/
make
sudo make install
```

### PcManFm

Set PcManFm as the default file manager. It's necessary for Chrome when it's broken after installing other tools:

`xdg-mime default pcmanfm.desktop inode/directory`

### VirtualBox

Packages for VirtualBox are not available in Debian 13. To install VirtualBox you must use the trixie-backports repository or the upstream third-party repository. More info, here: https://wiki.debian.org/VirtualBox, and here: https://www.virtualbox.org/wiki/Linux_Downloads.

## Navigation

All shortcuts are vim-style (H, J, K, L + U, D) and they are configured to work without conflicts coherently between i3wm, tmux, (neo)vim et al. Explanation:

Horizontal navigation between WM workspaces, tmux windows and vim buffers only has two directions: left and right. In this case, a modifier in combination with H and L is coherent with vim-style.

Four directions navigation (e.g. i3wm windows, tmux panes, vim windows) needs four keys: for left, right, top and bottom. In this case, a modifier in combination with H, J, K, L is coherent with vim-style.

Vertical navigation to scroll up/down tmux windows, vim buffers or man pages has two directions but as well two speeds. In this case, a modifier in combination with J, K, U and D is coherent with vim-style.

These are the guidelines:
- Vim-like navigation.
- Make it intuitive.
- Reduce the keystrokes.
- Improve the workflow.

That said, it is very logical to have different modifier keys for every application:
- <kbd>Super</kbd> to control the windows manager (i3wm in my case).
- <kbd>Alt</kbd> to control the terminal multiplexer (tmux in my case).
- <kbd>Control</kbd> to control a specific program (vim, w3m, irssi).

Tmux and vim share <kbd>Alt</kbd>+{hjkl} to navigate between tmux panes and vim windows; thanks to the plugin [vim-tmux-navigator](https://github.com/christoomey/vim-tmux-navigator).

Tmux uses a prefix key to separate all the shortcuts from the system. This idea is very convenient to avoid conflicts between shortcuts, however it implies too much keystrokes. This prefix also has some disadvantages, because it uses the default <kbd>Control</kbd>+<kbd>b</kbd>: you lose a useful readline command (backward character). Some people remap it to <kbd>Control</kbd>+<kbd>a</kbd> because it's easier to press, so they lose a useful readline command (go to the start of the line). Also, it is used into vim to increase a numeric value.

My recommendation is to use the <kbd>Alt</kbd> key to remap some tmux bind-keys (using the `-n` flag), skipping the prefix for the most used actions.

The following table shows the main workflow:

```
| ACTION        | I3WM          | TMUX         | VIM          |
| $mod key      | Super         | Alt          | Control      |
| ------------- | ------------- | ------------ | ------------ |
|               | (workspaces)  | (windows)    | (buffers)    |
| Next          | Ctrl+Super+l  | Ctrl+Alt+l   | Ctrl+l       |
| Previous      | Ctrl+Super+h  | Ctrl+Alt+h   | Ctrl+h       |
| Last          | Ctrl+Super+p  | Ctrl+Alt+p   | Ctrl+p Enter |
| ------------- | ------------- | ------------ | ------------ |
|               |               | (windows)    | (buffers)    |
| Up: 1 line    |               | Alt+space k  | Ctrl+k       |
| Down: 1 line  |               | Alt+space j  | Ctrl+j       |
| Up: ½ page    |               | Alt+space u  | Ctrl+u       |
| Down: ½ page  |               | Alt+space d  | Ctrl+d       |
| ------------- | ------------- | ------------ | ------------ |
|               | (windows)     | (panes)      | (windows)    |
| Focus ←       | Super+h       | Alt+h        | Alt+h        |
| Focus →       | Super+l       | Alt+l        | Alt+l        |
| Focus ↑       | Super+k       | Alt+k        | Alt+k        |
| Focus ↓       | Super+j       | Alt+j        | Alt+j        |
| Focus last    |               |              | Ctrl+w p     |
| Focus next    |               |              | Ctrl+w l     |
| Focus prev    |               |              | Ctrl+w h     |
| Focus #1      | Super+1       | Alt+1        |              |
| Focus #2      | Super+2       | Alt+2        |              |
| Focus #3      | Super+3       | Alt+3        |              |
| Focus #4      | Super+4       | Alt+4        |              |
| Focus #5      | Super+5       | Alt+5        |              |
| Focus #6      | Super+6       | Alt+6        |              |
| Focus #7      | Super+7       | Alt+7        |              |
| Focus #8      | Super+8       | Alt+8        |              |
| Focus #9      | Super+9       | Alt+9        |              |
| New terminal  | Super+n       | Alt+n        | Ctrl+t       |
| Kill active   | Super+x       | Alt+x        | Ctrl+w j     |
| New terminal  | Ctrl+Super+n  | Ctrl+Alt+n   | Ctrl+t       |
| Kill active   | Ctrl+Super+j  | Ctrl+Alt+j   | Ctrl+w j     |
| Only active   |               |              | Ctrl+w o     |
| ------------- | ------------- | ------------ | ------------ |
|               | (windows)     | (panes)      | (windows)    |
| Fullscreen    | Super+f       | Alt+f        | Ctrl+f       |
| Resize ←      | Super+r h     | Alt+H        | >            |
| Resize →      | Super+r l     | Alt+L        | <            |
| Resize ↑      | Super+r k     | Alt+K        | -            |
| Resize ↓      | Super+r j     | Alt+J        | +            |
| Split v       | Super+.       | Alt+.        | Ctrl+w .     |
| Split h       | Super+-       | Alt+-        | Ctrl+w -     |
| ------------- | ------------- | ------------ | ------------ |
|               | (windows)     | (panes)      | (windows)    |
| Move to ←     | Super+H       |              | Ctrl+w H     |
| Move to →     | Super+L       |              | Ctrl+w L     |
| Move to ↑     | Super+K       | Alt+K        | Ctrl+w K     |
| Move to ↓     | Super+J       | Alt+J        | Ctrl+w J     |
| Move to last  | Super+Shift+p |              |              |
| Move to # WS  | Super+Shift+# |              |              |
```

Command line tools:

```
| ACTION        | man (less)    | w3m          | irssi        |
| ------------- | ------------- | ------------ | ------------ |
|               | (pages)       | (tabs)       | (windows)    |
| Next          |               | Ctrl+l       | Ctrl+j       |
| Previous      |               | Ctrl+h       | Ctrl+k (1)   |
| ------------- | ------------- | ------------ | ------------ |
|               | (buffers)     | (websites)   | (buffers)    |
| Up: 1 line    | k             | k            |              |
| Down: 1 line  | j             | j            |              |
| Up: ½ page    | u             | u            | Alt+u, Alt+p |
| Down: ½ page  | d             | d            | Alt+d, Alt+n |
|               |               |              |        (2)   |

---

| ACTION        | vifm          | ranger        | cmus         | mutt         |
| ------------- | ------------- | ------------- | ------------ | ------------ |
|               | (files, dirs) | (files, dirs) | (playlists)  | (emails)     |
| Up: 1 line    | k             | k             | k            | k            |
| Down: 1 line  | j             | j             | j            | j            |
| Custom ←      | h, fold       | h, fold       | h, seek -5   |              |
| Custom →      | l, unfold     | l, unfold     | l, seek +5   |              |

---

1. Irssi windows are displayed in a column (vertical) according to my setup.
2. Alt+p and Alt+n are configured by default into irssi.
```

PDF and images:

```
| ACTION        | mupdf         | apvlv         | feh          |
| ------------- | ------------- | ------------- | ------------ |
|               | (pdfs)        | (pdfs)        | (images)     |
| ←             | h             | h             | h            |
| →             | l             | l             | l            |
| ↑             | k             | k             | k            |
| ↓             | j             | j             | j            |
| Zoom in       | +             | z             | z            |
| Zoom out      | -             | Z             | Z            |
| Up: ½ page    | b             | u             |              |
| Down: ½ page  | space         | d             |              |
| Rotate        | R, L          | r             | <, >         |
| Quit          | q             | q             | q            |
```

Audio:

```
| ACTION        | cmus          |
| ------------- | ------------- |
| ← (-seek)     | h             |
| → (+seek)     | l             |
| ↑             | k             |
| ↓             | j             |
| Pause         | c             |
| Stop          | v             |
| Volume up     | +             |
| Volume down   | -             |
| Quit          | q             |
```

Video:

```
| ACTION        | mpv           |
| ------------- | ------------- |
| ← (-seek)     | h             |
| → (+seek)     | l             |
| ←             | Ctrl+h        |
| →             | Ctrl+l        |
| ↑             | Ctrl+k        |
| ↓             | Ctrl+j        |
| Reset         | Ctrl+p        |
| Zoom in       | z             |
| Zoom out      | Z             |
| Reset zoom    | Ctrl+z        |
| Rotate        | r             |
| Reset rotate  | Ctrl+r        |
| Volume up     | +             |
| Volume down   | -             |
| Quit          | q             |
```

Yes, a mouse would make the life easier. And slower ;-)

This setup works in Debian 13 or later.

dotfiles

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README