personalized_pose

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

personalized_pose

(★ 15)

Personalized human video pose estimation

personalized_pose Latest Version Download

Download Latest Version (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Personalized human video pose estimation

MATLAB code for propagating human pose annotation throughout a video, as detailed in the paper:

J. Charles, T. Pfister, D. Magee, D. Hogg and A. Zisserman "[Personalized human video pose estimation](http://arxiv.org/abs/1511.06676)", CVPR 2016.

The code has been tested to work in both Windows 7 and Linux and is also equipped to run across a CPU cluster.

This work is licensed under the Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/ or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA.

Code is provided by James Charles

## What it does

Provided with:

* A video of a person,
* Dense optical flow (e.g. by using [DeepFlow](http://lear.inrialpes.fr/src/deepflow/)),
* A few initial pose annotations obtained either manually or automatically,

this code propagates initial pose annotations across the whole video to be later used for personalizing a generic pose estimator, such as [2].

## What is included

* All stages of propagation, as detailed in [1] are included i.e. spatial matching, temporal propagation and self-evaluation. 
* A script for setting up the training material to fine-tune the model of [2] on propagated pose annotations.
* Data for running the demo (360MB): [demo_data.zip](http://www.robots.ox.ac.uk/~vgg/software/personalized_pose/downloads/demo_data.zip)

## Prerequisites
Install the following prior to running:

* MATLAB 2012a or later (may work on earlier versions but untested)
* MATLAB Image Processing Toolbox
* [VLFeat](https://github.com/vlfeat/vlfeat/tree/master) 0.9.16 or later.
* [Deepflow](http://) (used for running on your own video, but not required for the demo).

### Self-contained packages
The following packages are also required but are included with this code so as to be self-contained:

* FLANN [http://www.cs.ubc.ca/research/flann/](http://www.cs.ubc.ca/research/flann/)
* liblinear [https://www.csie.ntu.edu.tw/~cjlin/liblinear/](https://www.csie.ntu.edu.tw/~cjlin/liblinear/)

FLANN mex files are pre-compiled. If there are problems using these then please download, install and compile FLANN from: [http://www.cs.ubc.ca/research/flann/](http://www.cs.ubc.ca/research/flann/).
If you get the MATLAB error: `cannot open with static TLS` when running the demo, restarting MATLAB normally fixes the problem.

## Setup
Compile mex files from within MATLAB:

```matlab
>> compile
```

Setup MATLAB paths:

```matlab
>> set_paths
```

## Running the demo

First download the demo video, optical flow file and initial pose annotations (360MB): [demo_data.zip](http://www.robots.ox.ac.uk/~vgg/software/personalized_pose/downloads/demo_data.zip)

Extract the contents of the zip and retain the folder structure. Initial pose annotations were recovered using the automatic methods described in [1].

### Set paths

Folder options in `./options/part_detector_options.m` need to be set according to your file system before running the demo:

```matlab
folder.main = 'folder where you extracted the demo data';
```

Also, set the experiment folder to somewhere you would like to cache the output. You will require around 600MB. The default is in the current working director.

```matlab
folder.experiment = 'folder where I want to store the cache';
```

### Chose input video

There is the option of running on one of two demo videos. A very short video (10s) useful for testing the installation: `E7ULR-yfNnk_vshort`. And a longer video (1min) `E7ULR-yfNnk_cut` where more benefit of personalization is observable. In general, the longer the video, the greater the benefit from pose propagation. Set the chosen video in `demo.m`

```matlab
videoname = 'E7ULR-yfNnk_vshort';
```

For best pose improvements on the longer video, we recommend setting the optical flow step size `opts.flow.stepsize` in `./options/propagation_options_youtube.m` to `30`. When using the shorter video you may leave this set on `3` for speed.

### Running the demo

Run the demo:

```matlab
>> demo
```

First, a visualization of the initial pose estimates on the demo video will play. Afterwards, pose propagation will run for one iteration and then a visualization of propagated poses will be displayed. Depending on the demo video used, one of the following propagation coverage graphs will be displayed:

![alt text](https://github.com/jjcharles/personalized_pose/raw/master/figures/demo_propagation_vshort.png "Short video E7ULR-yfNnk_vshort")
![alt text](https://github.com/jjcharles/personalized_pose/raw/master/figures/demo_propagation_cut.png "Longer video E7ULR-yfNnk_cut")

### Using multiple CPUs

Using one cpu, the short demo will complete in approx. 1 hour, the longer video taking approx. 4-6 hours. On a 12 core machine the longer demo video will complete in approx. 30 minutes. Multiple CPUs can be requested by changing the variable `num_cpus` in `demo.m` provided you have the `Parallel Processing Toolbox` installed. Memory requirements for running the longer demo is around 1.5GB and will increase with the number of cpus requested if running on one machine.

## Running on your own video

Resize the video so that the person has shoulder width approx. `100px` wide.

Copy your video into the `videos` folder within the demo, e.g. if your video is called `myvideo.avi`, place this in the folder `./demo_data/videos/`.

Compute dense optical flow across the whole video (we recommend using DeepFlow from [http://lear.inrialpes.fr/src/deepflow/](http://lear.inrialpes.fr/src/deepflow/)). Dense optical flow needs to be stored in a `.mat` containing the array `flow` and `minmax`.

A function called `collect_optic_flow` for producing a flow file in this format is provided but requires Deepflow to be installed. Set the path to the compiled binary of Deepflow in `propagation_options_youtube.m`

```matlab
opts.deepflowstatic = '/DeepFlow_release2/deepflow2-static';
```

Compute the required dense optical flow file

```matlab
>> collect_optic_flow('myvideo','youtube');
```

The array `flow` is a `uint8` array of size `frame_height x frame_width x 2 x N`, where `N` is the number of video frames and the 3rd dimension holds the `u` and `v` flow vector fields, respectively.

The flow vectors are scaled (per frame) between 0 and 255 according to the minimum and maximum values within a frame.

The array `minmax` is a `double` array of size `2 x 2 x N`. Rows represent `u` and `v` respectively and the columns are the min and max flow values respectively, per frame.

These arrays are saved in `./demo_data/optical_flow/` to a file called `myvideo.mat`

Next, produce initial body joint annotations (2D locations of 7 upper body joints) and save to a MATLAB structure called `detections.manual`:

* `detections.manual.locs` is a `2 x 7 x N` array representing pose annotations for a selection of `N` frames. A pose for each frame is given by a set of `x` and `y` (row 1 and row 2) body joint locations for the head, right wrist, left wrist, right elbow, left elbow, right shoulder and left shoulder, respectively, per column (person centric).
* `detections.manual.frameids` = `1 x N` array indicating the annotated frame IDs.

Save this struct:

```matlab
>> save('./demo_data/initialisation/myvideo.mat','detections');
```

If a body joint is unknown for a particular frame, then this can be indicated by setting the `x` and `y` coordinates in `detections.manual.locs` to `-999`

Finally, initial poses can be propagate for one iteration:

```matlab
>> detections = propagate('myvideo','youtube',...
    './demo_data/initialisation/myvideo.mat',1,1,1);
```

Pose output is visualized with:

```matlab
>> show_skeleton('./demo_data/videos/myvideo.avi',...
    1,detections.manual.frameids,detections.manual.locs,0);
```

## Settings
A number of useful parameter settings can be set for adjusting speed of execution and performance. These can be found in the option files `./options/part_detector_options_youtube.m` and `./options/propagation_options_youtube.m`.

We recommend experimenting with the following:

* `opts.model.forest.numtrees` for setting the number of trees in the random forest part detector. Lower numbers will reduce training time, ensure this number is a multiple of 2.
* `opts.model.rotations` for setting rotation augmentation during part detector training, setting less rotations will reduce memory requirements during training.
* `opts.flow.numneighbours` step size used for selecting frames to temporally propagate (i.e. set to 1 to select every frame or 2 to select every 2nd frame, etc.). Higher values will increase speed.
* `opts.flow.stepsize` temporal window used to propagate forward and backwards in time. In [1], this was set to 30.

## Personalizing the ConvNet of [2]
Personalization is achieved by fine-tuning the ConvNet (Caffe model) of [2] on the propagated pose estimates.

The function `fusion.setupFinetuningCropped` is designed to simplify the task of setting up the training data so the model can be fine-tuned in Caffe.

Various options should be set correctly prior to running this function and a detailed guide is provided:

### Fine-tuning Caffe model of [2]
Download the model and source code of [2] from: [https://github.com/tpfister/caffe-heatmap](https://github.com/tpfister/caffe-heatmap) and install Caffe.

Set the fine-tuning options in `./options/propagation_options_youtube.m` and provide absolute paths.

Set filename to generic ConvNet model

```
opts.cnn.finetune.model_filename = 'caffe-heatmap-flic.caffemodel';
```

Set folder to where training data will be generated

```
opts.cnn.finetune.ramdisk_folder = '/mnt/ramdisk/data/';
```

Set folder to where snapshots and training scripts are created

```
opts.cnn.finetune.main_save_folder = '/fusion_training/';
```

Set the root folder of the Caffe install

```
opts.cnn.finetune.cafferoot = '/caffe-heatmap/';
```

The `demo.m` script shows an example use of the function `fusion.setupFinetuningCropped`. In `demo.m` set `isFineTune` to `true` and re-run the script. You will then be signaled to run the generated `train.sh` bash script.

Model snapshots are saved in the snapshot folder within `opts.cnn.finetune.main_save_folder`.

**Note.** Body joint locations which are missing from frames are indicated by having the value `-999`. This occurs in frames where all body joints have not been successfully propagated, resulting in parts of poses. Therefore, the Euclidean loss function for [2] should be altered so as to provide zero loss for these missing body joint locations.

## Citation
If you use this code then please cite:

```bibtex
@InProceedings{Charles16,
   author       = "Charles, J. and Pfister, T. and Magee, D. and Hogg, D. and Zisserman, A.",
   title        = "Personalizing Human Video Pose Estimation",
   booktitle    = "IEEE Conference on Computer Vision and Pattern Recognition",
   year         = "2016",
}
```

## References
[1] J. Charles, T. Pfister, D. Magee, D. Hogg and A. Zisserman "[Personalized human video pose estimation](http://arxiv.org/abs/1511.06676)", CVPR 2016.

[2]  T. Pfister J. Charles  and A. Zisserman "[Flowing ConvNets for Human Pose Estimation in Videos](http://arxiv.org/abs/1506.02897)", ICCV 2015.

personalized_pose

personalized_pose Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

personalized_pose

personalized_pose Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

Download README