homebridge-mqtt-temperature

KO | EN

gitlite — search

#hacktoberfest #ai #go #android #linux #docker #nodejs #kubernetes #awesome-list #vue #pytorch #mcp #openai #open-source

homebridge-mqtt-temperature

(★ 20)

Get Temperature Sensor data via MQTT in Homebridge

homebridge-mqtt-temperature 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

DEPRECATION NOTICE
--------------------
----
This package is deprecated. Please use [homebridge-mqtthing](https://www.npmjs.com/package/homebridge-mqttthing) instead. It is more mature, better tested, and offers additional-features.
--------------------
--------------------
# homebridge-mqtt-temperature
Get Temperature Sensor data via MQTT in Homebridge

Installation
--------------------
    sudo npm install -g homebridge-mqtt-temperature

Sample HomeBridge Configuration
--------------------
    {
      "bridge": {
        "name": "HomeBridge",
        "username": "CC:33:3B:D3:CE:32",
        "port": 51826,
        "pin": "321-45-123"
      },

"description": "",

"accessories": [
        {
          "accessory": "mqtt-temperature",
          "name": "Living Room Temperature",
          "url": "mqtt://localhost",
          "topic": "home/livingroom/temperature/value",
          "refresh_topic": "home/livingroom/temperature/get"
          "batt_topic": "home/livingroom/temperature/battery",
          "charge_topic": "home/livingroom/temperature/charge",
          "batt_low_perc": "33",
          "username": "username",
          "password": "password",
          "maxTemperature": "75",
          "minTemperature": "-25",
          "serial": "HMT-34932B"
        }
      ],

"platforms": []
    }

---------------------

`maxTemperature` and `minTemperature` allow you to change the default high and low temperatures.

`serial` allows you to change the serial number to a custom value if you need it.

`batt_topic`, `charge_topic` and `bat_low_perc` are for battery powered sensors.
 - `batt_low_perc` overrides the default 20% value.
 - `charge_topic` is for charging state. It requires values of either 0 or 1 for off and on respectively.

`refresh_topic` lets you publish to a topic to refresh the current temperature value. This is useful in cases where your device publishes infrequently and you need an update between intervals. It requires your device to monitor this topic for requests. A request will published everytime homebridge makes a request, for example on opening the app.

All seven options are are optional as well as `username` and `password` if you don't use MQTT authentication.

#### Credits

[homebridge-mqttswitch](https://github.com/ilcato/homebridge-mqttswitch)

[homebridge-mqttgaragedoor](https://github.com/tvillingett/homebridge-mqttgaragedoor)

[homebridge-ds18b20](https://github.com/DanTheMan827/homebridge-ds18b20)

homebridge-mqtt-temperature

homebridge-mqtt-temperature 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

homebridge-mqtt-temperature

homebridge-mqtt-temperature 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README