loewenzahnhonig-firmware

KO | EN

gitlite — search

#javascript #python #hacktoberfest #ai #typescript #android #deep-learning #linux #docker #nodejs #java #awesome #vue #ios

loewenzahnhonig-firmware

(★ 39)

A repository to collect different firmwares for the daisy-based löwenzahnhonig module.

loewenzahnhonig-firmware Latest Version Download

Download Latest Version (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# loewenzahnhonig-firmware
A repository to collect different firmwares for the daisy-based Löwenzahnhonig module.

## Pre-compiled firmware

All firmwares are pre-compiled into binaries that are ready to be uploaded to the Daisy Seed. You can find them attached to the [latest release](https://github.com/wgd-modular/loewenzahnhonig-firmware/releases/latest). Simply open the [Daisy Web Flasher](https://electro-smith.github.io/Programmer/) via Google Chrome and upload the `.bin` file and flash your seed.

## Controls

One side of the modules front panel has a generic labelling. This table contains a mapping of which control is associated with which pin of the daisy seed.

| **Control**  | **Daisy Pin**   |
|------------- | --------------- |
| P1           | A0              |
| P2           | A1              |
| P3           | A2              |
| P4           | A3              |
| CV1          | A4              |
| CV2          | A5              |

# Compilation

This step is only required if you want to modify a firmware or create your own. The firmwares depends on the `libDaisy` and `DaisySP` development libraries by Electro-Smith. These are added as submodules to this repository and are most easily fetched when initially cloning the repository as follows:

```shell
git clone --recursive https://github.com/wgd-modular/loewenzahnhonig-firmware
```

Next you run the provided script to compile the libraries:

```shell
./build_libs.sh
```

Finally, if you want to compile all libraries you can run the provided Python script:

```shell
python ./build_firmwares.py
```

If instead you want to compile one specific firmware, you should change your working directory to that of the firmware and execute the Makefile. For example:

```shell
cd src/vca
make
```

This will compile the VCA firmware and place its output in the `build` subdirectory.

## Contributing

New firmwares for the Löwenzahnhonig module are always very welcome. Feel free to open a PR anytime. Each new firmware should be located in a new sub-folder with the same name as the `.ino` file together with a `README.md` file telling users about the controls and other possibly interesting stuff.

loewenzahnhonig-firmware

loewenzahnhonig-firmware Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

loewenzahnhonig-firmware

loewenzahnhonig-firmware Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

Download README