ESP8266-wifi-light-dimmer

KO | EN

gitlite — search

#mcp #ai #rust #claude-code #python #typescript #ai-agents #cli #developer-tools #ai-agent #cursor #mcp-server

ESP8266-wifi-light-dimmer

★ 67 Open GitHub ↗

No description available.

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# ESP8266-wifi-light-dimmer
Wifi light dimmer based off of the inexpensive ESP8266 wifi modules.

### Circuit design ###
I'm using a dimming circuit by [diy_bloke] (http://www.instructables.com/id/Arduino-controlled-light-dimmer-The-circuit/step1/Arduino-controlled-light-dimmer-The-PCB/). 
[Fritzing](http://fritzing.org/) schematics are under the schematics folder.

### Installing ###
1. Download [Arduino-compatible IDE with ESP8266 support] (https://github.com/esp8266/Arduino)
2. Load smartSwitch.ino sketch in Arduino IDE
3. Fill in SSID and password
4. Verify/adjust GPIO pins.
5. Flash sketch to ESP

### Control ###
Browse to IP of ESP. Use GET variables to configure settings:
- s = state (0 or 1)
- b = brightness (0-255)
- f = fade (0 or 1)

ex1: View current settings (json): http://ip.of.esp/ 
ex2: Set brightness to 50% and set state to on: http://ip.of.esp/?s=1&b=128 
ex3: Set brightness to 100% and enable fade: http://ip.of.esp/?b=255&f=1 
ex4: Toggle state (on->off or off->on): http://ip.of.esp/?s=t

ESP8266-wifi-light-dimmer

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README