esp32dash

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 9)

Wiring (C++): Small esp32dash.ino enables your ESP32 show HTML dashboard online

esp32dash 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

[![License: MIT](https://img.shields.io/badge/License-MIT-yellow.svg)](https://opensource.org/licenses/MIT)

# esp32dash

esp32dash is an open-source independently working part of the ESP32FREE project

(cc) ESP32FREE is a free web-server firmware for ESP32 prototyping | www.esp32free.com

![alt text](https://github.com/omreps/esp32dash/blob/master/img/mock-up4-git.png)

esp32dash enables your ESP32 show the dashboard in web-browser.
For example for the connected sensors values & outputs states & variables and so on. 
It does this by using the Google charts. This code is made for the ESP32 and use the [arduino-esp32](https://github.com/espressif/arduino-esp32).

# Hardware
- ESP32-board

![alt text](https://github.com/omreps/esp32dash/blob/master/img/ESP32-chip-icon.png)

# Installation instructions
- Install the arduino-core for the ESP32.
- Install the external library: [bbx10/WebServer_tng](https://github.com/bbx10/WebServer_tng)
- Configure IDE: Flash frequency 80 MHz, Flash size 4Mb(32Mb), Flash mode QIO, Upload speed is 115200.
- Configure code - seach for the "<-----" string in esp32dash.ino 
  - Set your Wi-Fi network SSID and PASS in the code. 
  - Set your Wi-Fi network IP, gate & mask, or leave as is for DHCP mode.
- Connect ESP32 board to the PC via the best of your USB cables. 
(it is very ! Important: Use the best USB-cable for the enough power supply.)
- Compile and upload the code to your ESP32.
- Upload the data to SPIFFS (see [here](https://github.com/me-no-dev/arduino-esp32fs-plugin) for more information).
- Open the COM-port monitor if you want.
- Wait until it connects to your Wi-Fi network. If your ESP32 board have the led on the 2-nd pin, it will blink 2 times.
- Go to [http://myESP32.local](http://myESP32.local) and there you'll find the dashboard with a few bilt-in sensors values. 
- Open the code again and add your live values to the dashItems array. Compile and upload the code to your ESP32.
- Refresh the page in the browser. Your data will be shown on the dash.
- We are the champions!

# Status indicators
This firmware use the led on the ESP32 GPIO2 to indicate it's status:
- On startup
  - normal blink for the 2 times: Wi-Fi founded and device connected as a client.
  - fast blink for the 5 times: something wrong, can't connecting to the Wi-Fi.

# Credits
- [Hopperpop](https://github.com/Hopperpop) for his well-structured project [Sattrack](https://github.com/Hopperpop/Sattrack) gave me the idea about how to bring things together making a web-server firmware for the ESP32.

esp32dash

esp32dash 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

esp32dash

esp32dash 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README